Backup route with single WAN box?
- 
 Hi everyone, 
 I have a simple fw running pfsense (LinITX APU 1D)
 It has 3 NICs - one WAN, one LAN, one OPT1The WLAN is connected to a FTTH services using PPOE. However this sometimes fails and for those rare occasions I would like to use my BT ADSL service that I still have available. Is there anyway I can use a static route or similar to route to the BT ADSL if the WAN is down? eg; FTT======-WAN pfsense -----------LAN--------BT ADSL Home 192.168.1.1.......................192.168.1.2 192.168.1.0/24Is there anyway to get the pfsense route to 192.168.1.2 if the WAN is down? 
- 
 Hello there! Yes you can do it as easy as configuring a few settings as described in the following link here you go Get back to here if you couldn't get it working. Good luck 
- 
 I had seen those config options, but they all refer to 2 WANs. Can I do this with 1 WAN and 1 LAN though? 
- 
 Sure. Just add the gateway and choose the correct interface and there you go. When creating a gateway group you are free to choose any interface. For instance LAN interface. Thus you can choose WAN1 and a gateway which uses LAN as its outgoing interface. That being said it would be better if you connect both of your Internet-connected devices to the pfsense box. 
- 
 Are you using the OPT1 interface, if not use that you can rename it WAN2 or ADSL in the interfaces assignment page. 
- 
 You will have to setup PFsense for a dual WAN or configure a 2nd gateway on your workstations and edit your metric there. 
- 
 @nogbadthebad interesting. I can free up OPT1 and then make it WAN2 then follow the other suggestions for groups. 
 Excellent. I will give that a try.
 Thanks
- 
 @marvosa said in Backup route with single WAN box?: You will have to setup PFsense for a dual WAN or configure a 2nd gateway on your workstations and edit your metric there. And that is exactly what I did. Easy and it works!! 
 Thanks to everyone for your help and support
