XG-7100 ETH LAN's Not Connecting to Additional Switches (pfSense 2.4.4)
-
I have an XG-7100 with switch ports configured as;
ETH1 - WAN (VLAN 4090 on lagg0)
ETH2 - LAN1 (VLAN 4091 on lagg0) 10.1.1.10 - DHCP on LAN
ETH3 - LAN2 (VLAN 4092 on lagg0) 192.168.10.1 - DHCP on Netgate
ETH4 - LAN3 (VLAN 4093 on lagg0) 192.168.20.1 - DHCP on Netgate
ETH5 - LAN4 (VLAN 4094 on lagg0) 192.168.30.1 - DHCP on NetgateETH1 is connected to a Cisco router and works fine
ETH2 is connected to an HP 1900 series switch and works fine
ETH3, 4 & 5 will connect if I plug my laptop in directly, but if I connect to a switch will no longer be visible/ pingable. I've tested with 3 other switches, an HP 2600 series, a Cisco SG-300 and a Netgear 5 port desktop switch. Weirdly, the Netgear desktop switch does work (but is impractical)I've tested with straight and crossover cables and I've also tested with a combination of different VLANS, single ETH ports active at a time, all ETH ports active. Still ETH3/4/5 will only connect if plugged into directly.
What am I missing?
-
Are you trunking those VLANs out of Eth3-5 to the switches?
Can we see your switch config in the XG-7100.
Steve
