Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Configuring LAN and WAN on ixo and ix1

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    13 Posts 2 Posters 2.8k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DerelictD Offline
      Derelict LAYER 8 Netgate
      last edited by

      All you should have to do is use Interfaces > Assignments and reassign the WAN and LAN interfaces from the lagg VLANs to the ix0 and ix1 ports. All of the configuration, including firewall rules, dhcp servers, etc will follow.

      Are you sure you have good connectivity on the ix ports to whatever they are connecting to? What type of SFP/SFP+ modules are you using?

      Chattanooga, Tennessee, USA
      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
      Do Not Chat For Help! NO_WAN_EGRESS(TM)

      1 Reply Last reply Reply Quote 0
      • L Offline
        LoneStarAg
        last edited by

        I tried that and couldn’t get any connectivity on the WAN side. On the LAN side I had dhcp but couldn’t ping the router. I could ping other devices on the lan but not the router. I have a Ubiquiti powerbeam M5 that I get my internet from. It goes to a fiber adapter to convert from Ethernet to the sfp LC. I’m using Ubiquiti LC SFP modules. I’m wondering if that maybe the issue. I’m using a 10gtek fiber media converter. Any ideas?

        1 Reply Last reply Reply Quote 1
        • DerelictD Offline
          Derelict LAYER 8 Netgate
          last edited by

          If you get DHCP on LAN (are you sure you are getting DHCP and not some cached lease showing up on the client) then you should be able to ping the pfSense LAN interface address if the firewall rules allow it. The default rules on LAN do.

          Does Status > Interfaces show both ix ports as Status up?

          Can you run the following and post the output?
          ifconfig -vm ix0
          ifconfig -vm ix1

          OK to obfuscate any public IP addresses there. Both are safe to run in Diagnostics > Command Prompt.

          Chattanooga, Tennessee, USA
          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
          Do Not Chat For Help! NO_WAN_EGRESS(TM)

          1 Reply Last reply Reply Quote 1
          • L Offline
            LoneStarAg
            last edited by

            I'm trying to post the output but it keeps marking it as spam. Any ideas?

            1 Reply Last reply Reply Quote 1
            • L Offline
              LoneStarAg
              last edited by

              https://www.dropbox.com/sh/v4qvcma2rc11yqo/AACG6UoPriQSBfCyhYK0QM78a?dl=0
              Link to the output files

              1 Reply Last reply Reply Quote 1
              • L Offline
                LoneStarAg
                last edited by

                I have everything connected and looked at the interfaces. It shows the WAN link is down. It must be something with the media converter or the modules.Here is the output of the ifconfig.

                1 Reply Last reply Reply Quote 1
                • DerelictD Offline
                  Derelict LAYER 8 Netgate
                  last edited by

                  What shows the WAN link as down? That shows active.

                  Chattanooga, Tennessee, USA
                  A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                  DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                  Do Not Chat For Help! NO_WAN_EGRESS(TM)

                  1 Reply Last reply Reply Quote 0
                  • L Offline
                    LoneStarAg
                    last edited by

                    Under Status—Interfaces. For some reason I swapped my IP address and gateway and now it shows active but the gateway is showing offline under Status—gateways. The info worked as is in my Ubiquiti USG. Kind of trying everything now.

                    1 Reply Last reply Reply Quote 0
                    • DerelictD Offline
                      Derelict LAYER 8 Netgate
                      last edited by Derelict

                      Status > Interfaces has nothing to do with the gateway. It reflects link. And perhaps DHCP.

                      I would suggest you start at layer 1 and work your way up.

                      Chattanooga, Tennessee, USA
                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                      1 Reply Last reply Reply Quote 0
                      • L Offline
                        LoneStarAg
                        last edited by

                        I did figure out one thing. I changed out media converters and modules. I read on another forum that the 7100 won’t auto negotiate to 1gb and only does 10gb without the upgraded board. I looked on the speeds for the WAN port and it only lists 10gb. Can I get the board upgraded?

                        1 Reply Last reply Reply Quote 0
                        • DerelictD Offline
                          Derelict LAYER 8 Netgate
                          last edited by

                          Open a ticket at https://go.netgate.com/

                          Chattanooga, Tennessee, USA
                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                          1 Reply Last reply Reply Quote 0
                          • L Offline
                            LoneStarAg
                            last edited by

                            Thank you!

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.