How to allow LAN to access other networks on WAN

[buomque1]

Hi,

There are 2 external networks available and accessible via WAN (192.168.1.0/24 and 192.168.10.0/24)

What settings do I need to do in order for my LAN to access those 2 networks?

Thank you,

[pwood999]

Is one of them routed via the other ? or does your Wan have two subnets on the same physical interface ?

[buomque1]

@pwood999 said in How to allow LAN to access other networks on WAN:

s one of them routed via the other

WAN is a physical interface with public IP: A.B.16.6
LAN is a virtual interface with Private IP: 10.10.64.1

192.168.216.0/24 is accessible via WAN:

LAN is not able to access 192.168.216.0/24

How do I route this network from WAN to LAN?

Thank you,

[pwood999]

Not sure if ping utility bypasses it, but uncheck "block RFC 1918" at bottom of WAN interface screen.

Also you need FW Rule to ensure traffic for 192.168.216.0 does not go via the WAN Gateway.