Problems with new install embedded version
-
Hello all,
I want to try an pfsense in an old Nortel Contivity 1010
I downloaded the embedded version pfSense-1.2-Embedded.img.gz
Verified MD , was OK
Unpacked it to pfSense.imgTryed to dd it on an 128 MB card.
dd if=c:\temp\temp\pfSense.img of=\.\h: bs=1M –size --progressNow my questions:
-
is it normal that dd stops with
31,440,896
31+0 records in
29+2 records out
Is the whole image written ?
I tryed this in the contivity and it can't boot. (boot error on console interface) -
is the downloaded pfSense.img for an 128 MB card or other format ?
-
if pfSense.img is for an other format, do I need to resize it to 128 MB ?
-
if so, how to do it on an WIN XP machine.
-
Thanks for the answers !
-
-
I dont know about DD but you can just use "physdiskwrite" from http://m0n0.ch/wall to write the compressed image under windows to the CF.
The downloaded image needs a minimum 128 MB card. It can be more, but the additional space wont be used.
Take a look at the documentation.
This guide is for the WRAP but you can use it for you too (just ignore all the WRAP stuff)
http://pfsense.icehosting.com//tutorials/wrap_install/wrap_install.htm -
Just tryed with "physdiskwrite" and it worked.
Much more simple !
Thanks.