Multi WAN + Mikrotik
-
Hi,
good day everyone! Just wanted a quick help with port forwarding on my pfsense. This is my setup
Main Network: 192.168.0.0/24
WAN1: 192.168.1.0/24 (modem/router combo) (IP: 192.168.1.2)
WAN2:192.168.254.0/24 (modem/router combo) (IP: 192.168.254.2)LAN1: 192.168.0.0/24 (IP: 192.168.0.4)
LAN2: 192.168.11.0/24 (WAN1 failover to WAN2) (IP: 192.168.11.1)
LAN3: 192.168.12.0/24 (WAN2 failover to WAN1) (IP: 192.168.12.1)
LAN4: 192.168.13.0/24 (WAN1 & WAN2 Load Balance) (IP: 192.168.13.1)Mikrotik: 192.168.0.1
WAN1: 192.168.11.2
WAN2: 192.168.12.2
WAN3: 192.168.13.2Server IP: 192.168.0.10
What I really wanted to do is access my port 80 online. This is what I did, and its not working right now.
From WAN1 & WAN2 (modem/router combo) Port forward public port 80 to:
WAN1: 192.168.1.2 private port 80
WAN2: 192.168.254.2 private port 80FROM Pfsense Port forward (firewall -> Nat)
Interface: WAN1
Protocol: TCP/UDP
Destination Type: WAN_Address
Destination Port: HTTP
Redirect Target IP:192.168.11.2
Redirect Target port: HTTPInterface: WAN2
Protocol: TCP/UDP
Destination Type: WAN2_Address
Destination Port: HTTP
Redirect Target IP:192.168.12.2
Redirect Target port: HTTPThen from the mikrotik. I port forwarded:
192.168.11.2:80 to 192.168.0.10:180
192.168.12.2:80 to 192.168.0.10:180Is there an easier way of doing this? I think its complicated for me because there are 3 routers running. If I port forward WAN1 port 80 to itself I can see the web gui when accessing the public IP.