Package Manager Failing SG-1100 pfsense 2.4.4-RELEASE-p2 (arm64)
-
@stephenw10 I've got the same issue just after update
Before update everything was working perfectly. Is there any way to be rolled back?
-
The package manager sees packages but you can't even ping 8.8.8.8?
That looks like a much more basic connectivity issue.
Update from what? Does the WAN show as up? Does it have a valid IP and subnet?
Check System > Routing > Gateways. Make sure you have a default gateway set. Especially if you came from a version earlier than 2.4.4.
Steve
-
-
@stephenw10 Update by clicking button on Dashboard (see screenshot)
-
Check the routing table in Diag > Routes.
You should always be able to ping 8.8.8.8 unless something is very broken. If there is no default route resave the default gateway again and recheck the routing table.
Steve
-
@stephenw10 After re-saving started to to be working. What the problem are there?
-
Did you come from a version earlier than 2.4.4? The default route handling was changed in 2.4.4 and some edge cases can lose the default when upgrading which is why I asked about that.
Anyway this was completely unrelated to the issue this thread was started for. Really you should open a new thread unless you are sure your issue is exactly the same.
Steve
-
@stephenw10 Few days ago downloaded ISO image and installed it on computer today. Before any adjusting made update. And got this issue. I am very new in pfSense. Could you assist me with sequence of actions that I need to perform for getting this https://forum.netgate.com/topic/142638/first-time-install-need-help
I don't need precise solutions. I need the step-by-step direction. Something like this:
-- install NAT
-- attach rule for this NAT
-- etc -
I saw this :
What are your LAN settings ?
-
Locking this thread, it's gone waaaay off topic. Please reply in that other thread.
Steve
