Pfsense and Huawei E1820 (on the known working list) problem
-
Hey everyone,
Currently fighting with getting a 3G dongle working but it's not going so well. The 3G stick is on the list (E1820): https://doc.pfsense.org/index.php/Known_Working_3G-4G_Modems
This is my usbconfig output
ugen0.1: <xhci root="" hub="" 0x1022=""> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) ugen1.1: <ohci root="" hub="" amd=""> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen2.1: <ehci root="" hub="" amd=""> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen3.1: <ohci root="" hub="" amd=""> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE (0mA) ugen4.1: <ehci root="" hub="" amd=""> at usbus4, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (0mA) ugen2.2: <huawei mobile="" huawei="" technologies=""> at usbus2, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA)</huawei></ehci></ohci></ehci></ohci></xhci>This is the output from dir /dev/cua*;dmesg
$ dir /dev/cua*;dmesg Copyright (c) 1992-2014 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 10.1-RELEASE-p9 #0 57b23e7(releng/10.1)-dirty: Mon Apr 13 20:30:25 CDT 2015 root@pfs22-amd64-builder:/usr/obj.amd64/usr/pfSensesrc/src/sys/pfSense_SMP.10 amd64 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512 CPU: AMD GX-210JA SOC with Radeon(tm) HD Graphics (998.21-MHz K8-class CPU) Origin = "AuthenticAMD" Id = 0x700f01 Family = 0x16 Model = 0x0 Stepping = 1 Features=0x178bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>Features2=0x3ed8220b <sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c>AMD Features=0x2e500800 <syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm>AMD Features2=0x154037ff <lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,pl2i>Structured Extended Features=0x8 <bmi1>TSC: P-state invariant, performance statistics real memory = 1595080704 (1521 MB) avail memory = 1505280000 (1435 MB) Event timer "LAPIC" quality 400 ACPI APIC Table: <core coreboot=""> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic1: Changing APIC ID to 5 ioapic0 <version 2.1=""> irqs 0-23 on motherboard ioapic1 <version 2.1=""> irqs 24-55 on motherboard wlan: mac acl policy registered ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff8060b5d0, 0) error 1 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff8060b680, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff8060b730, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff80632da0, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff80632e50, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi/. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff80632f00, 0) error 1 random: <software, yarrow=""> initialized kbd1 at kbdmux0 cryptosoft0: <software crypto=""> on motherboard padlock0: No ACE support. acpi0: <core coreboot=""> on motherboard acpi0: Power Button (fixed) cpu0: <acpi cpu=""> on acpi0 cpu1: <acpi cpu=""> on acpi0 atrtc0: <at realtime="" clock=""> port 0x70-0x71 irq 8 on acpi0 Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <at timer=""> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <high precision="" event="" timer=""> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <32-bit timer at 3.579545MHz> port 0x818-0x81b on acpi0 acpi_button0: <power button=""> on acpi0 pcib0: <acpi host-pci="" bridge=""> port 0xcf8-0xcff on acpi0 pci0: <acpi pci="" bus=""> on pcib0 vgapci0: <vga-compatible display=""> port 0x4000-0x40ff mem 0xe0000000-0xefffffff,0xf0000000-0xf07fffff,0xf0b00000-0xf0b3ffff at device 1.0 on pci0 vgapci0: Boot video device hdac0: <ati (0x9840)="" hda="" controller=""> mem 0xf0b60000-0xf0b63fff at device 1.1 on pci0 pcib1: <acpi pci-pci="" bridge=""> at device 2.2 on pci0 pcib1: failed to allocate initial I/O port window: 0x1000-0x1fff pci1: <acpi pci="" bus=""> on pcib1 em0: <intel(r) 1000="" pro="" network="" connection="" 7.4.2=""> mem 0xf0800000-0xf081ffff,0xf0820000-0xf0823fff at device 0.0 on pci1 em0: Using MSIX interrupts with 3 vectors pcib2: <acpi pci-pci="" bridge=""> at device 2.3 on pci0 pci2: <acpi pci="" bus=""> on pcib2 em1: <intel(r) 1000="" pro="" network="" connection="" 7.4.2=""> port 0x2000-0x201f mem 0xf0900000-0xf091ffff,0xf0920000-0xf0923fff at device 0.0 on pci2 em1: Using MSIX interrupts with 3 vectors pcib3: <acpi pci-pci="" bridge=""> at device 2.4 on pci0 pci3: <acpi pci="" bus=""> on pcib3 em2: <intel(r) 1000="" pro="" network="" connection="" 7.4.2=""> port 0x3000-0x301f mem 0xf0a00000-0xf0a1ffff,0xf0a20000-0xf0a23fff at device 0.0 on pci3 em2: Using MSIX interrupts with 3 vectors xhci0: <xhci (generic)="" usb="" 3.0="" controller=""> mem 0xf0b68000-0xf0b69fff at device 16.0 on pci0 xhci0: 32 byte context size. usbus0 on xhci0 ahci0: <amd hudson-2="" ahci="" sata="" controller=""> port 0x4410-0x4417,0x4420-0x4423,0x4418-0x441f,0x4424-0x4427,0x4400-0x440f mem 0xf0b6c000-0xf0b6c3ff at device 17.0 on pci0 ahci0: AHCI v1.30 with 2 3Gbps ports, Port Multiplier supported ahcich0: <ahci channel=""> at channel 0 on ahci0 ahcich1: <ahci channel=""> at channel 1 on ahci0 ohci0: <ohci (generic)="" usb="" controller=""> mem 0xf0b6a000-0xf0b6afff at device 18.0 on pci0 usbus1 on ohci0 ehci0: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xf0b6c400-0xf0b6c4ff at device 18.2 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci0 ohci1: <ohci (generic)="" usb="" controller=""> mem 0xf0b6b000-0xf0b6bfff at device 19.0 on pci0 usbus3 on ohci1 ehci1: <ehci (generic)="" usb="" 2.0="" controller=""> mem 0xf0b6c500-0xf0b6c5ff at device 19.2 on pci0 usbus4: EHCI version 1.0 usbus4 on ehci1 hdac1: <generic (0x780d1022)="" hda="" controller=""> mem 0xf0b64000-0xf0b67fff at device 20.2 on pci0 isab0: <pci-isa bridge=""> at device 20.3 on pci0 isa0: <isa bus=""> on isab0 sdhci_pci0: <generic sd="" hci=""> mem 0xf0b6c600-0xf0b6c6ff at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated mmc0: <mmc sd="" bus=""> on sdhci_pci0 sc0: <system console=""> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x100> vga0: <generic isa="" vga=""> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 atkbdc0: <keyboard controller="" (i8042)=""> at port 0x60,0x64 on isa0 atkbd0: <at keyboard=""> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range uart0: <16550 or compatible> at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 uart0: console (115200,n,8,1) uart1: <16550 or compatible> at port 0x2f8-0x2ff irq 3 on isa0 acpi_throttle0: <acpi cpu="" throttling=""> on cpu0 hwpstate0: <cool`n'quiet 2.0=""> on cpu0 acpi_throttle1: <acpi cpu="" throttling=""> on cpu1 acpi_throttle1: failed to attach P_CNT device_attach: acpi_throttle1 attach returned 6 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. hdacc0: <ati r6xx="" hda="" codec=""> at cad 0 on hdac0 hdaa0: <ati r6xx="" audio="" function="" group=""> at nid 1 on hdacc0 pcm0: <ati r6xx="" (hdmi)=""> at nid 3 on hdaa0 pcm1: <ati r6xx="" (hdmi)=""> at nid 5 on hdaa0 usbus0: 5.0Gbps Super Speed USB v3.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 480Mbps High Speed USB v2.0 usbus3: 12Mbps Full Speed USB v1.0 ugen0.1: <0x1022> at usbus0 uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ugen1.1: <amd> at usbus1 uhub1: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus1 ugen2.1: <amd> at usbus2 uhub2: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus2 ugen3.1: <amd> at usbus3 uhub3: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""> on usbus3 usbus4: 480Mbps High Speed USB v2.0 ugen4.1: <amd> at usbus4 uhub4: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""> on usbus4 random: unblocking device. mmcsd0: 16GB <sdhc 116="" 2015="" 47180188="" sdu1 ="" 0.2="" sn="" mfg="" 02="" by="" j`=""> at mmc0 31.5MHz/4bit/65535-block SMP: AP CPU #1 Launched! Timecounter "TSC" frequency 998212924 Hz quality 1000 uhub1: 4 ports with 4 removable, self powered uhub3: 4 ports with 4 removable, self powered uhub0: 4 ports with 4 removable, self powered Root mount waiting for: usbus4 usbus2 Root mount waiting for: usbus4 usbus2 uhub2: 4 ports with 4 removable, self powered uhub4: 4 ports with 4 removable, self powered ugen2.2: <huawei technologies=""> at usbus2 u3g0: <huawei 0="" 2="" technologies="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus2 u3g0: Found 4 ports. umass0: <huawei 0="" 2="" technologies="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr=""> on usbus2 cd0 at umass-sim0 bus 0 scbus2 target 0 lun 0 cd0: <huawei mass="" storage="" 2.31=""> Removable CD-ROM SCSI-2 device umass1: cd0: 40.000MB/s transfers <huawei 0="" 2="" technologies="" huawei="" mobile,="" class="" 0,="" rev="" 2.00="" 0.00,="" addr="">on usbus2 cd0: cd present [65536 x 2048 byte records] cd0: quirks=0x10<10_BYTE_ONLY> da0 at umass-sim1 bus 1 scbus3 target 0 lun 0 da0: <huawei tf="" card="" storage=""> Removable Direct Access SCSI-2 device da0: 40.000MB/s transfers da0: Attempt to query device size failed: NOT READY, Medium not present da0: quirks=0x2 <no_6_byte>Trying to mount root from ufs:/dev/ufs/pfsense0 [ro,sync,noatime]... vlan0: changing name to 'em1_vlan100' vlan1: changing name to 'em1_vlan200' vlan2: changing name to 'em1_vlan300' vlan3: changing name to 'em1_vlan400' vlan4: changing name to 'em1_vlan500' vlan5: changing name to 'em1_vlan600' em1: link state changed to UP em1_vlan100: link state changed to UP em1_vlan200: link state changed to UP em1_vlan400: link state changed to UP em1_vlan500: link state changed to UP em1_vlan600: link state changed to UP em1_vlan300: link state changed to UP pflog0: promiscuous mode enabled</no_6_byte></huawei></huawei></huawei></huawei></huawei></huawei></sdhc></amd></amd></amd></amd></amd></amd></amd></amd></ati></ati></ati></ati></acpi></cool`n'quiet></acpi></at></keyboard></generic></system></mmc></generic></isa></pci-isa></generic></ehci></ohci></ehci></ohci></ahci></ahci></amd></xhci></intel(r)></acpi></acpi></intel(r)></acpi></acpi></intel(r)></acpi></acpi></ati></vga-compatible></acpi></acpi></power></high></at></at></acpi></acpi></core></software></software,></version></version></core ></bmi1></lahf,cmp,svm,extapic,cr8,abm,sse4a,mas,prefetch,osvw,ibs,skinit,wdt,topology,pnxc,dbe,pl2i></syscall,nx,mmx+,ffxsr,page1gb,rdtscp,lm></sse3,pclmulqdq,mon,ssse3,cx16,sse4.1,sse4.2,movbe,popcnt,aesni,xsave,osxsave,avx,f16c></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt>From this info I gather - hopefully correctly - that the modem is on /dev/cuaU0.2. But no worky. This is output on status > interfaces
4G interface (opt7, ppp0) Status up DHCP down MAC address 00:00:00:00:00:00 MTU 1500 In/out packets 0/0 (0 bytes/0 bytes) In/out packets (pass) 0/0 (0 bytes/0 bytes) In/out packets (block) 0/3 (0 bytes/296 bytes) In/out errors 0/0 Collisions 0And this is a short version of the system log > ppp
May 7 19:30:24 ppp: [opt7_link0] Link: reconnection attempt 30 May 7 19:30:38 ppp: [opt7_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. May 7 19:30:38 ppp: [opt7_link0] MODEM: chat script failed May 7 19:30:38 ppp: [opt7_link0] Link: DOWN event May 7 19:30:38 ppp: [opt7_link0] LCP: Down event May 7 19:30:38 ppp: [opt7_link0] Link: reconnection attempt 31 in 2 secondsNow, when I pull and reconnect the modem while PFsense is still running, I get a new set of cua's;
cuaU1.0
cuaU1.1
cuaU1.2
cuaU1.3If I set the ppp interface to cuaU1.3 I get some sort of recognition at least, but it still won't connect;
May 7 19:35:09 ppp: [opt7] Bundle: Interface ng0 created May 7 19:35:09 ppp: [opt7_link0] Link: OPEN event May 7 19:35:09 ppp: [opt7_link0] LCP: Open event May 7 19:35:09 ppp: [opt7_link0] LCP: state change Initial --> Starting May 7 19:35:09 ppp: [opt7_link0] LCP: LayerStart May 7 19:35:09 ppp: [opt7_link0] CHAT: +CGDCONT=1,"IP","online.telia.se" May 7 19:35:09 ppp: [opt7_link0] CHAT: Detected Hayes compatible modem. May 7 19:35:09 ppp: [opt7_link0] CHAT: Dialing server at *99#... May 7 19:35:09 ppp: [opt7_link0] CHAT: ATDT*99# May 7 19:35:10 ppp: [opt7_link0] CHAT: The remote modem did not answer. May 7 19:35:10 ppp: [opt7_link0] MODEM: chat script failed May 7 19:35:10 ppp: [opt7_link0] Link: DOWN event May 7 19:35:10 ppp: [opt7_link0] LCP: Down event May 7 19:35:10 ppp: [opt7_link0] Link: reconnection attempt 1 in 3 seconds May 7 19:35:13 ppp: [opt7_link0] Link: reconnection attempt 1 May 7 19:35:13 ppp: [opt7_link0] CHAT: +CGDCONT=1,"IP","online.telia.se" May 7 19:35:13 ppp: [opt7_link0] CHAT: Detected Hayes compatible modem. May 7 19:35:13 ppp: [opt7_link0] CHAT: Dialing server at *99#... May 7 19:35:13 ppp: [opt7_link0] CHAT: ATDT*99# May 7 19:35:13 ppp: [opt7_link0] CHAT: The remote modem did not answer. May 7 19:35:13 ppp: [opt7_link0] MODEM: chat script failed May 7 19:35:13 ppp: [opt7_link0] Link: DOWN event May 7 19:35:13 ppp: [opt7_link0] LCP: Down event May 7 19:35:13 ppp: [opt7_link0] Link: reconnection attempt 2 in 1 seconds May 7 19:35:14 ppp: [opt7_link0] Link: reconnection attempt 2 May 7 19:35:16 ppp: [opt7_link0] CHAT: +CGDCONT=1,"IP","online.telia.se" May 7 19:35:16 ppp: [opt7_link0] CHAT: Detected Hayes compatible modem. May 7 19:35:16 ppp: [opt7_link0] CHAT: Dialing server at *99#... May 7 19:35:16 ppp: [opt7_link0] CHAT: ATDT*99# May 7 19:35:16 ppp: [opt7_link0] CHAT: The remote modem did not answer. May 7 19:35:16 ppp: [opt7_link0] MODEM: chat script failed May 7 19:35:16 ppp: [opt7_link0] Link: DOWN event May 7 19:35:16 ppp: [opt7_link0] LCP: Down event May 7 19:35:16 ppp: [opt7_link0] Link: reconnection attempt 3 in 1 seconds May 7 19:35:17 ppp: [opt7_link0] Link: reconnection attempt 3I have tested the dongle in my laptop (in the same room) and can connect. Only EDGE, but at least 60% signal so it should be OK. I also tried rebooting the router several times, but if I do I can't get it to recognise the dongle at all, I need to pull and reconnect it to get the above result.
Any ideas?
-
Some of the modem scripts seem broken these days. Check this post for something to try.
PPP advanced modem init string:
+CFUN=1https://forum.pfsense.org/index.php?topic=90199.msg507588#msg507588
-
@Phishfry:
Some of the modem scripts seem broken these days. Check this post for something to try.
PPP advanced modem init string:
+CFUN=1https://forum.pfsense.org/index.php?topic=90199.msg507588#msg507588
I'll give that a try and report back. Thanks!
-
No go I'm afraid. Got new log inputs though.
May 13 10:26:47 ppp: [opt7_link0] CHAT: Detected Custom modem. May 13 10:26:47 ppp: [opt7_link0] CHAT: Dialing server at *99#... May 13 10:26:47 ppp: [opt7_link0] CHAT: ATDT*99# May 13 10:26:47 ppp: [opt7_link0] CHAT: The remote modem did not answer. May 13 10:26:47 ppp: [opt7_link0] MODEM: chat script failed May 13 10:26:47 ppp: [opt7_link0] Link: DOWN event May 13 10:26:47 ppp: [opt7_link0] LCP: Down event May 13 10:26:47 ppp: [opt7_link0] Link: reconnection attempt 3 in 4 seconds May 13 10:26:51 ppp: [opt7_link0] Link: reconnection attempt 3 May 13 10:26:51 ppp: [opt7_link0] CHAT: Detected Custom modem. May 13 10:26:54 ppp: [opt7_link0] CHAT: The modem is not responding to "AT+cfun=1" at ModemCmd: label. May 13 10:26:54 ppp: [opt7_link0] MODEM: chat script failed May 13 10:26:54 ppp: [opt7_link0] Link: DOWN event May 13 10:26:54 ppp: [opt7_link0] LCP: Down event May 13 10:26:54 ppp: [opt7_link0] Link: reconnection attempt 4 in 4 seconds May 13 10:26:58 ppp: [opt7_link0] Link: reconnection attempt 4Any other ideas? :-[
-
I installed usb_modeswitch today in an effort to at least try something, but the application says there are no things to change, and exits. And nothing happens with the cua's either. I'm close to giving up >:(
-
I am not much help with usb modems. I use Sierra MC7700 internal modem and they have 2 modes of firmware, QMI and DirectIP. So that is the only issue with mode switching I have had to deal with. I handle that with Windows firmware flasher. I have a feeling it could be handled with a modeswitch if I knew what i was doing…
In the old days the mass storage devices had to be ejected for 3G to work. I wonder if that is your issue.
-
Well if I knew there were a firmware to fix this I'd use it, but I don't think there are. It really bothers me that open source is always like this. Like "sure it works, but you need to do A, to go to B, to reach C, in order to get X, then it'll work". And there's usually not enough accurate documentation, so it's almost always a guessing game half the time. Argh! >:(
I really thought I'd done the right thing when I specially ordered this modem, since it was the only modem I could get my hands on that was on the known working list. It really sucks!
Not sure where to go from here, I really need 3G or 4G to work since there are no more options at the location the unit resides.
-
bump
Anyone got any ideas?
-
Ok, I don't know exactly what I did except changing cua to 0.0, now it suddenly works. Can't even explain what I did differently this time that I haven't already tried. And secondly if it'll last. We'll see.
Tnx for all help Phishfry!
-
just for reference are you using the +CFUN command or is it working out of the box?
-
just for reference are you using the +CFUN command or is it working out of the box?
Nope. And as far as I can tell, not modeswitch either. At least the cua's look the same as before I installed modeswitch, and the script itself said there are nothing to change. It just suddenly started to work and I have no freaking idea why. That bothers me.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.