APCUPSD - SNMP Broken

[Corellon]

Running apcupsd-3.14.12_1 pkg v0.3.6 on PFSense 2.1 and SNMP is not working as an option.

When you set the configuration under UPS type / Device as:

snmp xxx.xxx.xxx.xxx:161:APC:Community

APCUPSD is unable to contact the UPS, It seems to be a problem in the script which writes the config file, when I scp into the server and open the config file I see:

UPSTYPE snmp xxx.xxx.xxx.xxx:161:APC:Community
#DEVICE

When I change the config manually to reflect:
UPSTYPE snmp
DEVICE xxx.xxx.xxx.xxx:161:APC:Community

The service is able to start and communicate with the UPS properly.

[dbaio]

On "UPS Type / Device" field, set just  "snmp".
On "Device" field, set the rest of your config.

[Corellon]

Now that you point it out I see that line thanks.

Instructions could use a once over, pull the device type instruction down to that line maybe?

Thanks