Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Athp driver

    Scheduled Pinned Locked Moved Development
    71 Posts 8 Posters 16.5k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • kiokomanK
      kiokoman LAYER 8
      last edited by kiokoman

      i was unable to load it as a module, ... don't remember why / what kind of error it was, missing reference or something

      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
      Please do not use chat/PM to ask for help
      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by stephenw10

        I found the same. But once I had the modules in the correct locations...

        athp0@pci0:4:0:0:	class=0x028000 card=0x00000000 chip=0x003c168c rev=0x00 hdr=0x00
    vendor     = 'Qualcomm Atheros'
    device     = 'QCA986x/988x 802.11ac Wireless Network Adapter'
    class      = network

        [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: ifconfig -v athp0_wlan0 
athp0_wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 04:f0:21:28:af:bd
	inet6 fe80::6f0:21ff:fe28:afbd%athp0_wlan0 prefixlen 64 scopeid 0xb 
	groups: wlan 
	ssid "" channel 6 (2437 MHz 11g ht/40+) bssid 04:f0:21:28:af:bd
	regdomain FCC country US anywhere -ecm authmode OPEN -wps -tsn
	privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100
	txpower 30 txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346
	bmiss 7
	11a     ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	turboA  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	turboG  ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	sturbo  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	11na    ucast NONE    mgmt 12 MCS  mcast 12 MCS  maxretry 6
	11ng    ucast NONE    mgmt  2 MCS  mcast  2 MCS  maxretry 6
	half    ucast NONE    mgmt  3 Mb/s mcast  3 Mb/s maxretry 6
	quarter ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11acg   ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11ac    ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
	roam:11a     rssi    7dBm rate 12 Mb/s
	roam:11b     rssi    7dBm rate  1 Mb/s
	roam:11g     rssi    7dBm rate  5 Mb/s
	roam:turboA  rssi    7dBm rate 12 Mb/s
	roam:turboG  rssi    7dBm rate 12 Mb/s
	roam:sturbo  rssi    7dBm rate 12 Mb/s
	roam:11na    rssi    7dBm  MCS  1    
	roam:11ng    rssi    7dBm  MCS  1    
	roam:half    rssi    7dBm rate  6 Mb/s
	roam:quarter rssi    7dBm rate  3 Mb/s
	roam:11acg   rssi    7dBm rate 64 Mb/s
	roam:11ac    rssi    7dBm rate 64 Mb/s
	-pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8
	amsdu shortgi htprotmode RTSCTS -puren -smps -rifs stbc -ldpctx ldpcrx
	vht vht40 vht80 -vht80p80 -vht160 wme -burst -dwds -hidessid apbridge
	dtimperiod 1 doth -dfs inact bintval 100
	AC_BE cwmin  4 cwmax  6 aifs  3 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
	AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
	AC_VI cwmin  3 cwmax  4 aifs  1 txopLimit  94 -acm ack
	      cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
	AC_VO cwmin  2 cwmax  3 aifs  1 txopLimit  47 -acm ack
	      cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11ng <hostap>
	status: running
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

        Had an issue with the card initialising wrong. Seems to require warm boot in that box. Fun!

        That's a Compex WLE600VX.

        Steve

        JonathanLeeJ 1 Reply Last reply Reply Quote 0
        • kiokomanK
          kiokoman LAYER 8
          last edited by kiokoman

          there is no gui interface to configure wifi ssid for me so i have created a script
          /root/hostapd_athp0_wlan0.conf

          interface=athp0_wlan0
          driver=bsd
          logger_syslog=-1
          logger_syslog_level=0
          dump_file=/tmp/hostapd_athp0_wlan0.dump
          ctrl_interface=/var/run/hostapd_wlan0
          ctrl_interface_group=wheel
          ssid=pfSense-5G
          debug=
          wpa=2
          wpa_key_mgmt=WPA-PSK
          wpa_pairwise=CCMP
          wpa_group_rekey=3600
          wpa_strict_rekey=
          wpa_passphrase=yourpasswordhere

          after this i created a script inside /usr/local/etc/rc.d/hostapd-5g.sh

          #/bin/sh
          /usr/local/sbin/hostapd -B -P /var/run/hostapd_athp0_wlan0.pid /root/hostapd_athp0_wlan0.conf

          wifi go up and running at startup

          did i understand correctly and you have only loaded the alq module +athp ? if so can you share the alq.ko ? sorry english is not my first language

          ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
          Please do not use chat/PM to ask for help
          we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
          Don't forget to Upvote with the 👍 button for any post you find to be helpful.

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            No I had to use the kernel with alq compiled in. It failed to load as a module as you found.

            1 Reply Last reply Reply Quote 0
            • stephenw10S
              stephenw10 Netgate Administrator
              last edited by

              What sort of speeds are you seeing? I definitely have something screwy here. I see link at 6Mbps!

              Also if I enable WPA it all crashes out...

              1 Reply Last reply Reply Quote 0
              • kiokomanK
                kiokoman LAYER 8
                last edited by kiokoman

                i'm still working on it, when i go home i will check better but last time i saw it on my phone was at 144Mbps. you should ask Geramy he will surely help you with the crash and he will provide patch
                Screenshot_20190515-223602_WiFiAnalyzer.jpg

                ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                Please do not use chat/PM to ask for help
                we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                1 Reply Last reply Reply Quote 0
                • kiokomanK
                  kiokoman LAYER 8
                  last edited by

                  i can confirm you that i have 144Mbps on 2,4Ghz channel 11 ht40- mode 11ng, but if i change mode to 11a channel 161 i have only 54Mbps and i'm unable to use/activate 40Mhz width only 20Mhz.
                  ifconfig athp0_wlan0 channel 161:ht40- does nothing, no error messages and no 40Mhz

                  ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                  Please do not use chat/PM to ask for help
                  we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                  Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    Seems like it would have to be ifconfig athp0_wlan0 channel 161:ht/40- though I can't test that as 161 is not a channel available to me.

                    It also seems like maybe ifconfig would need updating for ac options to use it that way... no vht mode.

                    54Mbps beats me anyway. 😉

                    Selection_627.png

                    1 Reply Last reply Reply Quote 0
                    • stephenw10S
                      stephenw10 Netgate Administrator
                      last edited by

                      Mmm, maybe not it does appear to have vht vht40 and vht80 enabled:

                      [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: ifconfig -v athp0_wlan0 
athp0_wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	ether 04:f0:21:28:af:bd
	inet6 fe80::6f0:21ff:fe28:afbd%athp0_wlan0 prefixlen 64 scopeid 0xb 
	inet 192.168.36.1 netmask 0xffffff00 broadcast 192.168.36.255 
	groups: wlan 
	ssid AreaACnet channel 48 (5240 MHz 11a ht/40-) bssid 04:f0:21:28:af:bd
	regdomain ETSI country GB anywhere -ecm authmode OPEN -wps -tsn
	privacy OFF deftxkey UNDEF powersavemode OFF powersavesleep 100
	txpower 17 txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346
	bmiss 7
	11a     ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	turboA  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	turboG  ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	sturbo  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	11na    ucast NONE    mgmt 12 MCS  mcast 12 MCS  maxretry 6
	11ng    ucast NONE    mgmt  2 MCS  mcast  2 MCS  maxretry 6
	half    ucast NONE    mgmt  3 Mb/s mcast  3 Mb/s maxretry 6
	quarter ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11acg   ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
	11ac    ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
	scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
	roam:11a     rssi    7dBm rate 12 Mb/s
	roam:11b     rssi    7dBm rate  1 Mb/s
	roam:11g     rssi    7dBm rate  5 Mb/s
	roam:turboA  rssi    7dBm rate 12 Mb/s
	roam:turboG  rssi    7dBm rate 12 Mb/s
	roam:sturbo  rssi    7dBm rate 12 Mb/s
	roam:11na    rssi    7dBm  MCS  1    
	roam:11ng    rssi    7dBm  MCS  1    
	roam:half    rssi    7dBm rate  6 Mb/s
	roam:quarter rssi    7dBm rate  3 Mb/s
	roam:11acg   rssi    7dBm rate 64 Mb/s
	roam:11ac    rssi    7dBm rate 64 Mb/s
	-pureg protmode OFF ht htcompat ampdu ampdulimit 64k ampdudensity 8
	amsdu shortgi htprotmode RTSCTS -puren -smps -rifs stbc -ldpctx ldpcrx
	vht vht40 vht80 -vht80p80 vht160 wme -burst -dwds -hidessid -apbridge
	dtimperiod 1 doth -dfs inact bintval 100
	AC_BE cwmin  4 cwmax  6 aifs  3 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
	AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
	      cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
	AC_VI cwmin  3 cwmax  4 aifs  1 txopLimit  94 -acm ack
	      cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
	AC_VO cwmin  2 cwmax  3 aifs  1 txopLimit  47 -acm ack
	      cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm
	media: IEEE 802.11 Wireless Ethernet autoselect mode 11na <hostap>
	status: running
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

                      My card pulls only the API 5 firmware. Not sure if that's intended...

                      [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: kldstat
Id Refs Address                Size Name
 1   22 0xffffffff80200000  3124198 kernel
 2    1 0xffffffff83421000      fe0 cpuctl.ko
 3    1 0xffffffff83422000     2678 intpm.ko
 4    1 0xffffffff83425000      b10 smbus.ko
 5    1 0xffffffff83426000     3110 cryptodev.ko
 6    1 0xffffffff8342a000    8d728 if_athp.ko
 7    1 0xffffffff834b8000      a45 athp_QCA988X_hw2.0_board.bin.ko
 8    1 0xffffffff834b9000    3cb9f athp_QCA988X_hw2.0_firmware-5.bin.ko
                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Hmm, real throughput appears to be ~250Mbps so that 'rate' reported is not what I think it is...

                        1 Reply Last reply Reply Quote 0
                        • kiokomanK
                          kiokoman LAYER 8
                          last edited by 

                          [2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig -v athp0_wlan0
athp0_wlan0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        ether 00:0e:8e:5a:c6:f6
        inet6 fe80::20e:8eff:fe5a:c6f6%athp0_wlan0 prefixlen 64 tentative scopeid 0xa
        groups: wlan
        ssid pfSense-5G channel 48 (5240 MHz 11a) bssid 00:00:00:00:00:00
        regdomain FCC country US anywhere -ecm authmode WPA2/802.11i -wps
        -tsn privacy MIXED deftxkey 2
        AES-CCM 2:128-bit powersavemode OFF powersavesleep 100 txpower 17
        txpowmax 50.0 -dotd rtsthreshold 2346 fragthreshold 2346 bmiss 7
        11a     ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
        11b     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
        11g     ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
        turboA  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
        turboG  ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
        sturbo  ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
        11na    ucast NONE    mgmt 12 MCS  mcast 12 MCS  maxretry 6
        11ng    ucast NONE    mgmt  2 MCS  mcast  2 MCS  maxretry 6
        half    ucast NONE    mgmt  3 Mb/s mcast  3 Mb/s maxretry 6
        quarter ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
        11acg   ucast NONE    mgmt  1 Mb/s mcast  1 Mb/s maxretry 6
        11ac    ucast NONE    mgmt  6 Mb/s mcast  6 Mb/s maxretry 6
        scanvalid 60 -bgscan bgscanintvl 300 bgscanidle 250
        roam:11a     rssi    7dBm rate 12 Mb/s
        roam:11b     rssi    7dBm rate  1 Mb/s
        roam:11g     rssi    7dBm rate  5 Mb/s
        roam:turboA  rssi    7dBm rate 12 Mb/s
        roam:turboG  rssi    7dBm rate 12 Mb/s
        roam:sturbo  rssi    7dBm rate 12 Mb/s
        roam:11na    rssi    7dBm  MCS  1
        roam:11ng    rssi    7dBm  MCS  1
        roam:half    rssi    7dBm rate  6 Mb/s
        roam:quarter rssi    7dBm rate  3 Mb/s
        roam:11acg   rssi    7dBm rate 64 Mb/s
        roam:11ac    rssi    7dBm rate 64 Mb/s
        -pureg protmode CTS ht htcompat ampdu ampdulimit 64k ampdudensity 8
        amsdu shortgi htprotmode RTSCTS -puren -smps -rifs stbc -ldpctx ldpcrx
        vht vht40 vht80 -vht80p80 -vht160 wme -burst -dwds -hidessid apbridge
        dtimperiod 1 doth -dfs inact bintval 100
        AC_BE cwmin  4 cwmax  6 aifs  3 txopLimit   0 -acm ack
              cwmin  4 cwmax 10 aifs  3 txopLimit   0 -acm
        AC_BK cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm ack
              cwmin  4 cwmax 10 aifs  7 txopLimit   0 -acm
        AC_VI cwmin  3 cwmax  4 aifs  1 txopLimit  94 -acm ack
              cwmin  3 cwmax  4 aifs  2 txopLimit  94 -acm
        AC_VO cwmin  2 cwmax  3 aifs  1 txopLimit  47 -acm ack
              cwmin  2 cwmax  3 aifs  2 txopLimit  47 -acm
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11a <hostap>
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>


                          [2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 list regdomain
:regdomain FCC country US anywhere -ecm
Channel   1 : 2412      MHz 11b          Channel   9 : 2452      MHz 11g
Channel   1 : 2412      MHz 11g          Channel   9 : 2452      MHz 11g ht/20
Channel   1 : 2412      MHz 11g ht/20    Channel   9 : 2452      MHz 11g ht/40-
Channel   1 : 2412      MHz 11g ht/40+   Channel  10 : 2457      MHz 11b
Channel   2 : 2417      MHz 11b          Channel  10 : 2457      MHz 11g
Channel   2 : 2417      MHz 11g          Channel  10 : 2457      MHz 11g ht/20
Channel   2 : 2417      MHz 11g ht/20    Channel  10 : 2457      MHz 11g ht/40-
Channel   2 : 2417      MHz 11g ht/40+   Channel  11 : 2462      MHz 11b
Channel   3 : 2422      MHz 11b          Channel  11 : 2462      MHz 11g
Channel   3 : 2422      MHz 11g          Channel  11 : 2462      MHz 11g ht/20
Channel   3 : 2422      MHz 11g ht/20    Channel  11 : 2462      MHz 11g ht/40-
Channel   3 : 2422      MHz 11g ht/40+   Channel  36 : 5180      MHz 11a
Channel   4 : 2427      MHz 11b          Channel  36 : 5180      MHz 11a ht/20
Channel   4 : 2427      MHz 11g          Channel  36 : 5180      MHz 11a ht/40+
Channel   4 : 2427      MHz 11g ht/20    Channel  40 : 5200      MHz 11a
Channel   4 : 2427      MHz 11g ht/40+   Channel  40 : 5200      MHz 11a ht/20
Channel   5 : 2432      MHz 11b          Channel  40 : 5200      MHz 11a ht/40-
Channel   5 : 2432      MHz 11g          Channel  44 : 5220      MHz 11a
Channel   5 : 2432      MHz 11g ht/20    Channel  44 : 5220      MHz 11a ht/20
Channel   5 : 2432      MHz 11g ht/40+   Channel  44 : 5220      MHz 11a ht/40+
Channel   5 : 2432      MHz 11g ht/40-   Channel  48 : 5240      MHz 11a
Channel   6 : 2437      MHz 11b          Channel  48 : 5240      MHz 11a ht/20
Channel   6 : 2437      MHz 11g          Channel  48 : 5240      MHz 11a ht/40-
Channel   6 : 2437      MHz 11g ht/20    Channel 149 : 5745      MHz 11a
Channel   6 : 2437      MHz 11g ht/40+   Channel 149 : 5745      MHz 11a ht/20
Channel   6 : 2437      MHz 11g ht/40-   Channel 149 : 5745      MHz 11a ht/40+
Channel   7 : 2442      MHz 11b          Channel 153 : 5765      MHz 11a
Channel   7 : 2442      MHz 11g          Channel 153 : 5765      MHz 11a ht/20
Channel   7 : 2442      MHz 11g ht/20    Channel 153 : 5765      MHz 11a ht/40-
Channel   7 : 2442      MHz 11g ht/40+   Channel 157 : 5785      MHz 11a
Channel   7 : 2442      MHz 11g ht/40-   Channel 157 : 5785      MHz 11a ht/20
Channel   8 : 2447      MHz 11b          Channel 157 : 5785      MHz 11a ht/40+
Channel   8 : 2447      MHz 11g          Channel 161 : 5805      MHz 11a
Channel   8 : 2447      MHz 11g ht/20    Channel 161 : 5805      MHz 11a ht/20
Channel   8 : 2447      MHz 11g ht/40-   Channel 161 : 5805      MHz 11a ht/40-
Channel   9 : 2452      MHz 11b          Channel 165 : 5825*     MHz 11a

                          ifconfig athp0_wlan0 channel 48:ht/40-
                          ifconfig: SIOCS80211: invalid argument

                          ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                          Please do not use chat/PM to ask for help
                          we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                          Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                          1 Reply Last reply Reply Quote 0
                          • kiokomanK
                            kiokoman LAYER 8
                            last edited by kiokoman

                            nevermind, i see that you set 11na and i have 11a, after setting to 11na i can configure width to 40Mhz.
                            thank you
                            the problem for me was hostapd that as soon as i start it, it go back to 11a
                            so i changed my script to set mode and channel with ifconfig and start hostapd with only wpa stuff inside config

                            /usr/local/etc/rc.d/hostapd-5g.sh

                            #/bin/sh
ifconfig athp0_wlan0 mode 11na
ifconfig athp0_wlan0 channel 48:ht/40-
/usr/local/sbin/hostapd -B -P /var/run/hostapd_athp0_wlan0.pid /root/hostapd_athp0_wlan0.conf

                            and inside /root/hostapd_athp_wlan0.conf

                            interface=athp0_wlan0
logger_syslog=-1
logger_syslog_level=0
dump_file=/tmp/hostapd_athp0_wlan0.dump
ctrl_interface=/var/run/hostapd_wlan0
ctrl_interface_group=wheel
ssid=pfSense-5G
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
auth_algs=3
wmm_enabled=1
wme_enabled=1
wpa=2
wpa_key_mgmt=WPA-PSK
wpa_pairwise=CCMP
rsn_pairwise=CCMP
wpa_group_rekey=3600
wpa_passphrase=somepassword

                            the problem was that i had channel=48:ht/40- before inside hostapd conf and starting it resulted in mode changed to 11a without 40 width
                            now i have a 300Mpbs connection on my phone

                            Screenshot_20190516-215107_Wi-Fi SweetSpots.jpg

                            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                            Please do not use chat/PM to ask for help
                            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                            1 Reply Last reply Reply Quote 0
                            • stephenw10S
                              stephenw10 Netgate Administrator
                              last edited by

                              Mmm, yeah it's connecting at 300Mbps at 802.11n. Which is as good as it gets for a 2x2 device. So that's good!

                              Room for improvement! 😀

                              Steve

                              1 Reply Last reply Reply Quote 0
                              • kiokomanK
                                kiokoman LAYER 8
                                last edited by

                                nonSense 12-RELEASE-p4 https://drive.google.com/drive/folders/1fM-Jlmf8BY21kIEGueSxFWmrISZqcDj3
                                as before i had to add ALQ and increse #define FIRMWARE_MAX because i had "firmware table full!" followed by kernel panic

                                ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                Please do not use chat/PM to ask for help
                                we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                1 Reply Last reply Reply Quote 0
                                • stephenw10S
                                  stephenw10 Netgate Administrator
                                  last edited by

                                  Anything else changed in there? Just updated?

                                  Not really sure what is required to put this into 802.11ac mode. It seems like that would ahve to be set via ifconfig and perhaps that part is missing at this point...

                                  Steve

                                  1 Reply Last reply Reply Quote 0
                                  • kiokomanK
                                    kiokoman LAYER 8
                                    last edited by kiokoman

                                    i just recopiled the pfsense kernel because there was an update on the kernel but nothing to do with wifi in general

                                    idk where that part is missing on the ath10k driver or kernel

                                    [2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11g
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11a
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11b
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11g
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11na
[2.5.0-DEVELOPMENT][root@pfSense.localdomain]/root: ifconfig athp0_wlan0 mode 11ac
ifconfig: SIOCSIFMEDIA (media): Invalid argument

                                    sadly, for sure nothing will come out of it in the next few days

                                    ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                    Please do not use chat/PM to ask for help
                                    we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                    Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                    1 Reply Last reply Reply Quote 0
                                    • kiokomanK
                                      kiokoman LAYER 8
                                      last edited by

                                      https://redmine.pfsense.org/issues/9538

                                      "ALQ added to all pfSense kernels"

                                      good news, at least we don't need to recompile nonSense kernel anymore, we just need the modules

                                      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                      Please do not use chat/PM to ask for help
                                      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                      1 Reply Last reply Reply Quote 0
                                      • stephenw10S
                                        stephenw10 Netgate Administrator
                                        last edited by

                                        Yup, there was some other stuff being added, seemed like a good time. Just using the modules will be waaay easier.

                                        However I'm not sure the max firmware size increase has been included yet. That has potential to affect far more things so it was being investigated last I heard.

                                        Steve

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          @kiokoman said in Athp driver:

                                          FIRMWARE_MAX

                                          What value did you end up using for that? Is it possible to allow the firmware to be loaded there by not loading other unused firmwares perhaps?

                                          Steve

                                          1 Reply Last reply Reply Quote 0
                                          • kiokomanK
                                            kiokoman LAYER 8
                                            last edited by

                                            yes, i understand that, but i have 2 atheros mini pci express card, 1 for 2.4Ghz that use ath9k that work without problem and one QCA988X for the 5Ghz.
                                            i set FIRMWARE_MAX to 100 but i put a random value, default was 50 if I remember correctly.

                                            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                            Please do not use chat/PM to ask for help
                                            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.