SG4860 detected at SG2440
-
Something strange happened after a shutdown and startup. The SG4860 had an configuration error. Something about a non existent interface. I am using 3 interface and only 2 detected. After the boot up. I notice that on the dashboard, the device name is now Netgate SG2440. Then I wonder if this is the Atom bug or something else?
Hope this is making sense.
-
The issue you reference would stop the box from booting entirely, not fail to detect some of the network interfaces.
Can you show the boot log (
/var/log/dmesg.boot)?What is in your
/boot/loader.confand/boot/loader.conf.local(if they exist)? -
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.2-RELEASE-p3 #17 e6b497fa0a3(RELENG_2_4_4): Thu Sep 20 09:04:45 EDT 2018
root@buildbot3:/crossbuild/ce-244/obj/amd64/WvDslnYb/crossbuild/ce-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
VT(vga): resolution 640x480
CPU: Intel(R) Atom(TM) CPU C2558 @ 2.40GHz (2400.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics
real memory = 10737418240 (10240 MB)
avail memory = 8211431424 (7831 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <CORE COREBOOT>
WARNING: L1 data cache covers less APIC IDs than a core
0 < 1
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
ioapic0 <Version 2.0> irqs 0-23 on motherboard
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1200029700 Hz quality 1000
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80680430, 0) error 1
random: entropy device external interface
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806804e0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80680590, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a7460, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a7510, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a75c0, 0) error 1
wlan: mac acl policy registered
hn: tranparent VF mode, if_transmit will be used, instead of if_start
kbd0 at kbdmux0
netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff81209800, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <CORE COREBOOT> on motherboard
acpi0: Power Button (fixed)
hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed03000-0xfed033ff on acpi0
hpet0: invalid period
device_attach: hpet0 attach returned 6
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-safe" frequency 3579545 Hz quality 850
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> mem 0xdff00000-0xdff1ffff irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> mem 0xdff20000-0xdff3ffff irq 16 at device 2.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> mem 0xdff40000-0xdff5ffff irq 20 at device 3.0 on pci0
pci3: <ACPI PCI bus> on pcib3
igb0: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x1000-0x101f mem 0xdfd00000-0xdfd1ffff,0xdfd20000-0xdfd23fff irq 18 at device 0.0 on pci3
igb0: Using MSIX interrupts with 3 vectors
igb0: Ethernet address: 00:08:a2:09:a3:49
igb0: Bound queue 0 to cpu 0
igb0: Bound queue 1 to cpu 1
igb0: netmap queues/slots: TX 2/1024, RX 2/1024
pcib4: <ACPI PCI-PCI bridge> mem 0xdff60000-0xdff7ffff irq 23 at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
igb1: <Intel(R) PRO/1000 Network Connection, Version - 2.5.3-k> port 0x2000-0x201f mem 0xdfe00000-0xdfe1ffff,0xdfe20000-0xdfe23fff irq 19 at device 0.0 on pci4
igb1: Using MSIX interrupts with 3 vectors
igb1: Ethernet address: 00:08:a2:09:a3:4a
igb1: Bound queue 0 to cpu 2
igb1: Bound queue 1 to cpu 3
igb1: netmap queues/slots: TX 2/1024, RX 2/1024
pci0: <processor> at device 11.0 (no driver attached)
pci0: <base peripheral, IOMMU> at device 15.0 (no driver attached)
ehci0: <Intel Avoton USB 2.0 controller> mem 0xdffa5400-0xdffa57ff irq 22 at device 22.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
usbus0: 480Mbps High Speed USB v2.0
ahci0: <Intel Avoton AHCI SATA controller> port 0x3040-0x3047,0x3060-0x3063,0x3048-0x304f,0x3064-0x3067,0x3000-0x301f mem 0xdffa4000-0xdffa47ff irq 23 at device 23.0 on pci0
ahci0: AHCI v1.30 with 4 3Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahci1: <Intel Avoton AHCI SATA controller> port 0x3050-0x3057,0x3068-0x306b,0x3058-0x305f,0x306c-0x306f,0x3020-0x303f mem 0xdffa4800-0xdffa4fff irq 16 at device 24.0 on pci0
ahci1: AHCI controller reset failure
device_attach: ahci1 attach returned 6
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
orm0: <ISA Option ROM> at iomem 0xc0000-0xc0fff on isa0
ppc0: cannot reserve I/O port range
uart0: <16550 or compatible> at port 0x3f8 irq 4 on isa0
uart1: <16550 or compatible> at port 0x2f8 irq 3 flags 0x10 on isa0
uart1: console (115200,n,8,1)
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
Timecounters tick every 1.000 msec
ugen0.1: <Intel EHCI root HUB> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub0: 8 ports with 8 removable, self powered
ugen0.2: <vendor 0x8087 product 0x07db> at usbus0
uhub1 on uhub0
uhub1: <vendor 0x8087 product 0x07db, class 9/0, rev 2.00/0.02, addr 2> on usbus0
uhub1: 4 ports with 4 removable, self powered
ugen0.3: <Generic Ultra Fast Media> at usbus0
umass0 on uhub1
umass0: <Generic Ultra Fast Media, class 0/0, rev 2.00/1.98, addr 3> on usbus0
Trying to mount root from ufs:/dev/ufsid/5ba9dd3fc5d9f2b2 [rw]...
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <Generic Ultra HS-COMBO 1.98> Removable Direct Access SCSI device
da0: Serial Number 000000225001
da0: 40.000MB/s transfers
da0: 3648MB (7471104 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
WARNING: / was not properly dismounted
WARNING: /: mount pending error: blocks 0 files 2
random: unblocking device.
CPU: Intel(R) Atom(TM) CPU C2558 @ 2.40GHz (2400.06-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x406d8 Family=0x6 Model=0x4d Stepping=8
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x43d8e3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,MOVBE,POPCNT,TSCDLT,AESNI,RDRAND>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x101<LAHF,Prefetch>
Structured Extended Features=0x2282<TSCADJ,SMEP,ERMS,NFPUSG>
VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
TSC: P-state invariant, performance statistics -
kern.cam.boot_delay=10000
comconsole_port="0x2F8"
kern.ipc.nmbclusters="1000000"
kern.ipc.nmbjumbop="524288"
kern.ipc.nmbjumbo9="524288"
comconsole_port="0x2F8"
comconsole_port="0x2F8"
comconsole_port="0x2F8"
comconsole_port="0x2F8"
comconsole_port="0x2F8"
comconsole_port="0x2F8"
boot_serial="YES"
console="comconsole"
comconsole_speed="115200"
comconsole_port="0x2F8"
hint.uart.0.flags="0x00"
hint.uart.1.flags="0x10"
autoboot_delay="3"
hw.usb.no_pf="1"
kern.ipc.semopm=100
kern.ipc.semmni=128
kern.ipc.semmns=32000
kern.ipc.shmmni=4096 -
Strange. I don't see any errors, but the other four ports just aren't being detected.
What shows up if you run
pciconf -lvb? -
Can't post. Flag as spam
-
-
Hmm, it's just not seeing the NIC in the SoC at all.
You should open a ticket with us at https://go.netgate.com to look at options here.
Steve
-
Looks like its dead.
Ordered a new XG7100
