Official pfSense hardware customer photos / network pics porn!
-
…I built a smart mirror in his bathroom with a bunch of widgets on a monitor behind interrogation glass. (I'll get some pictures if requested)...
Yes please..
I acquired a 30"x30" sheet of one-way interrogation glass from our company's glass supplier. I bought a 27" asus monitor and ripped the front bezel off. I applied a liberal amount of liquid nails between the bezel-less chassis and the screen to make sure it wasn't going anywhere. I did this to get the screen as close to the glass as possible.
I needed a way to mask ambient light from bleeding through the back of the glass, so I used 3M vinyl wrap that's use for car decaling. I smoothed it across the glass, making sure to be careful of air bubbles.
I measured the space where the monitor is planning to go in relation to the standoff locations, then mounted a small flat wall mount for the monitor. I put the mirror on the mount and glass on the wall, then marked the wrap where the top of the monitor hit the glass.
Using that as reference point, I traced the outline of the monitor on the vinyl, and then marked a second set of lines 1/2" inside of the first. Using a straight edge and a razor blade, I gently cut the vinyl and peeled away the inside.
After that, I just had to put the monitor back on the mount, and the glass back on the standoffs, and we're ready to roll.
The video source is a Chromebit in kiosk mode. It points to a local ubuntu wordpress VM. I made a custom theme and added a bunch of generic widgets.
I've made three of these mirrors now, the largest having a 43" 4k tv behind it. If anyone has any interest in more details, feel free to PM me. It was fun figuring out how to do this, and after three, I've got the process down.
That is really awesome!
-
Have some cable management to work on… But my shiny new sg4860 is in operation.. Have not moved all my vlans off of opt1 to the other interfaces - project for xmas break.
Its so nice to be on official hardware finally vs the VM.. I will miss the ability to take snapshot when playing with dev snapshots, etc. But I will just play with dev stuff on the VM that will be downstream..
Loving it...
-
Just backup the config. It's almost as fast to recover (discounting package reinstallation)
My edge is a 4860 desktop. Workhorse.
-
1 of many….. ;D ;D ;D
How do you like that pfSense SG4860-1u? I am thinking of getting one for home..
-
Well, now that everyone's pictures but mine are deleted I win by default?
-
hehehe... Good one @ikkuranus but I think they are working on bringing the pics back... I sure hope so many threads don't make a lot of sense without the pics.
-
I made a few changes from my setup last year.
I upgraded to a deeper rack with a few more rack units of space to accommodate a Dell Powerconnect 5524p and to hold my HPE Microserver g10 NAS. The primary goals for this upgrade were for 802.3af and 10gbe to several devices. ( I have a second switch that can be stacked with the first for an additional 2x sfp+ ports)
I'm still using the Netgear CM600, Netgate 2440, and Rpi3 model B but the pi will be repurposed shortly after I virtualize FreePBX. -
I will attach hardware photos here a bit later.. But i must say it feels wonderful to have a router working flawlessly again since i had problems with my old one recently (hardware bought via Aliexpress). The new Netgate hardware uses half the power the old hardware did and manages my 117/17 Mbit fibre connection flawlessly. Running 2 OpenVPN tunnels too without any issues and always full speed on the tunnels :)
Uptime is 58 days now (i recieved the hardware 58 days ago.. But since i have to shut it down to move some cables soon this uptime will be no more..)
-
@Taz79 said in Official pfSense hardware customer photos / network pics porn!:
I will attach hardware photos here a bit later.
What's taking so long?
-
DOH! My apoligies not offical HW....... -
SG-8860s in HA =)
-
SG-3100
-
we had some fun
-
Hooked up 10Gbps LAN on 6100 to a UniFi Pro 48 using a Ubiquity Direct Connect Cable.
Physically connected on the 6100 to port labelled "WAN4" and then swapped LAN and WAN4's interface assignments and then rebooted the pfsense. Then renamed the WAN4 to LAN1 to avoid more confusion. I really dislike how they labelled these physically for this class of a router, and preferred something more generic like their old models.Oh and the Meraki makes a great stand for the 6100
We are in the process of moving out all Meraki hardware! -
I've finally made the holes in the walls necessary to bring the 6100 into my rack. Now I'm wondering whether I should remove the brush cable manager and bring the two DACs through the holes next to the netgate. And while I'm at it, how do people route these DACs? Messy :(
Going to have to agree with the WAN3/4 labels being less than optimal.Between this and my TR system, and despite the energy efficiency of the 6100 (thank you!) there's a little too much heat in this room. This guy is going to have to go upstairs. More holes at some point, and attic work....
-
Netgate SG-2100 Max, small but packs a punch.
Very powerful yet smaller than the DSL modem.
(IMAGE: SG-2100 MAX)
Apple extreme WIFI N with huge external drive, and the DSL modem.
(IMAGE: small scale footprint)
This provides big firewall tools inside a small footprint.
-
Netgate 7100 1u base
-
@bbaalen I see it in there under the patch cables
-
Some works in progress
-
@bbaalen Nice, we use to use Crestron controlers for the RPX Polycom video conference systems.
