HP NC523SFP 10 Gbit Adapter - qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMEN
-
Hi,
We are trying to get our HP NC523SFP PCI-Express Dual Port 10 Gbit Adapter to work with PFsense. The card runs on Qlogic 3200 driver (qlxgb).
We have copied the driver file from freebsd and added it to loader.conf.
Also we have set the system tunables to, as the driver readme file says:kern.ipc.nmbjumbo9=262144 net.inet.tcp.recvbuf_max=262144 net.inet.tcp.recvbuf_inc=16384 kern.ipc.nmbclusters=1000000 kern.ipc.maxsockbuf=2097152 net.inet.tcp.recvspace=131072 net.inet.tcp.sendbuf_max=262144 net.inet.tcp.sendspace=65536
However then we are assigning the interface, we get thousands of these failures:
kernel: ql0: qla_hw_send: (nsegs[1, 42, 0x0] > Q8_TX_MAX_SEGMENTS) kernel: ql0: qla_dump_buf8: qla_hw_send: wrong pkt dump end kernel: ql0: 0x00000020: 00 00 00 00 00 00 c2 ff 1f fe kernel: ql0: 0x00000010: 08 00 06 04 00 01 8c dc d4 91 ec 10 c2 ff 1f 03 kernel: ql0: 0x00000000: ff ff ff ff ff ff 8c dc d4 91 ec 10 08 06 00 01 kernel: qla_dump_buf8: qla_hw_send: wrong pkt 0x2a dump start
Does anybody know what causes this?