HUAWEI e8732-h as WAN
-
@Renat the link you gave me says to create two files...now how do I create those files..? Touch command? .
-
@Rupesh said in HUAWEI e8732-h as WAN:
Touch command?
touch can create a file. It will be empty (zero bytes).
I advise you to use a sftp client - and a text editor like Notepad++.
Or, what the heck, just SSH (console) into your pfSense, go option 8 and vi will be waiting for you.
-
@Rupesh first of all check your modem by plug it to your pc. There should be additional interface with 192.168.8.0/24 subnet. If so you can plug your lte modem to pfsense box and reboot it. Then login to pfsense and see all available interfaces (Interfaces -> Interface Assignments) Modem also should be available in the list.
-
@Renat it is just a simple web interface with usage details and connected client list.. however I'm still gonna do that restart of pfsense
-
@Renat does pfsense work with usb tethering as wan?
-
@Rupesh I already tested it (the same model). It works fine. But it is better to use external LTE router connected to pfsense with UTP cable.
-
@Renat I followed the procedure to install modeswitch(didn't go exactly as mentioned for 2.3 but I could install it) and creating LTE.cfg and LTE.sh( made it executable) files.and setting up in shell command. Still I'm unable to find anything listed under ppp interface.
I have pfsense 2.4.4 does this has anything to do with me unable to get it to work ? -
@Rupesh it is something wrong with your modem. 8372 should be available as ethernet port (not ppp). Unfortunately I haven't it right now and cannot show you.
Pls check available network ports here:
-
What do you see in the system log when you first connect the modem?
What do you see when you run usbmodeswitch?
Steve
-
@Renat I will run reinstall pfsense again and share the screenshots
-
-
usb mode switch wasant getting installed so i followed this https://monach.us/operations/usb_modeswitch_on_pfsense/
-
-
Look at the System Log in Status > System Logs > System tab.
Connect the modem. Recheck the log, paste new entries here so we can review them.
usb_modeswitch is in the pfSense repo you can just install it normally:[2.4.4-RELEASE][root@5100.stevew.lan]/root: pkg install usb_modeswitch Updating pfSense-core repository catalogue... pfSense-core repository is up to date. Updating pfSense repository catalogue... pfSense repository is up to date. All repositories are up to date. The following 1 package(s) will be affected (of 0 checked): New packages to be INSTALLED: usb_modeswitch: 2.5.2 [pfSense] Number of packages to be installed: 1 59 KiB to be downloaded. Proceed with this action? [y/N]: y [1/1] Fetching usb_modeswitch-2.5.2.txz: 100% 59 KiB 60.2kB/s 00:01 Checking integrity... done (0 conflicting) [1/1] Installing usb_modeswitch-2.5.2... [1/1] Extracting usb_modeswitch-2.5.2: 100%Run USB Mode Switch as shown here: https://forum.netgate.com/post/99859
Post the output from usb_modeswitch.Check the system log again for new entries and post them here for review.
Steve
-
@stephenw10
This is the system log -
-
Ok, so run usb_modeswitch again the custom config file as shown in that linked thread and then recheck the system log (you can just copy and paste the log text here rather than using screen shots).
Steve
-
Aug 8 09:08:07 check_reload_status Reloading filter
Aug 8 09:08:10 check_reload_status Linkup starting em0
Aug 8 09:08:10 kernel em0: link state changed to UP
Aug 8 09:08:11 php-fpm 62554 /rc.linkup: DEVD Ethernet attached event for wan
Aug 8 09:08:11 php-fpm 62554 /rc.linkup: HOTPLUG: Configuring interface wan
Aug 8 09:08:11 check_reload_status rc.newwanip starting em0
Aug 8 09:08:11 php-fpm 62554 /rc.linkup: calling interface_dhcpv6_configure.
Aug 8 09:08:11 php-fpm 62554 /rc.linkup: Accept router advertisements on interface em0
Aug 8 09:08:11 php-fpm 62554 /rc.linkup: Starting rtsold process
Aug 8 09:08:13 php-fpm 76178 /rc.newwanip: rc.newwanip: Info: starting on em0.
Aug 8 09:08:13 php-fpm 76178 /rc.newwanip: rc.newwanip: on (IP address: 192.168.65.132) (interface: WAN[wan]) (real interface: em0).
Aug 8 09:08:13 php-fpm 76178 /rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Aug 8 09:08:14 php-fpm 62554 /rc.linkup: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Aug 8 09:08:14 check_reload_status Restarting ipsec tunnels
Aug 8 09:09:08 php-fpm 62554 /rc.linkup: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1565255348] unbound[33019:0] error: bind: address already in use [1565255348] unbound[33019:0] fatal error: could not open ports'
Aug 8 09:09:08 php-fpm 76178 /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Aug 8 09:09:08 php-fpm 76178 /rc.newwanip: Creating rrd update script
Aug 8 09:09:09 check_reload_status updating dyndns wan
Aug 8 09:09:09 check_reload_status Reloading filter
Aug 8 09:09:10 php-fpm 76178 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.65.132 -> 192.168.65.132 - Restarting packages.
Aug 8 09:09:10 check_reload_status Starting packages
Aug 8 09:09:11 php-fpm 62554 /rc.start_packages: Restarting/Starting all packages.
Aug 8 09:13:55 kernel em0: link state changed to DOWN
Aug 8 09:13:55 check_reload_status Linkup starting em0
Aug 8 09:13:56 php-fpm 72020 /rc.linkup: DEVD Ethernet detached event for wan
Aug 8 09:13:57 check_reload_status Reloading filter
Aug 8 09:14:00 check_reload_status Linkup starting em0
Aug 8 09:14:00 kernel em0: link state changed to UP
Aug 8 09:14:01 php-fpm 72020 /rc.linkup: DEVD Ethernet attached event for wan
Aug 8 09:14:01 php-fpm 72020 /rc.linkup: HOTPLUG: Configuring interface wan
Aug 8 09:14:01 check_reload_status rc.newwanip starting em0
Aug 8 09:14:01 php-fpm 72020 /rc.linkup: calling interface_dhcpv6_configure.
Aug 8 09:14:01 php-fpm 72020 /rc.linkup: Accept router advertisements on interface em0
Aug 8 09:14:01 php-fpm 72020 /rc.linkup: Starting rtsold process
Aug 8 09:14:02 php-fpm 86172 /rc.newwanip: rc.newwanip: Info: starting on em0.
Aug 8 09:14:02 php-fpm 86172 /rc.newwanip: rc.newwanip: on (IP address: 192.168.65.132) (interface: WAN[wan]) (real interface: em0).
Aug 8 09:14:03 php-fpm 86172 /rc.newwanip: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Aug 8 09:14:03 php-fpm 72020 /rc.linkup: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6'
Aug 8 09:14:03 check_reload_status Restarting ipsec tunnels
Aug 8 09:14:05 php-fpm 72020 /rc.linkup: The command '/usr/local/sbin/unbound -c /var/unbound/unbound.conf' returned exit code '1', the output was '[1565255645] unbound[26322:0] error: bind: address already in use [1565255645] unbound[26322:0] fatal error: could not open ports'
Aug 8 09:14:05 php-fpm 86172 /rc.newwanip: Resyncing OpenVPN instances for interface WAN.
Aug 8 09:14:05 php-fpm 86172 /rc.newwanip: Creating rrd update script
Aug 8 09:14:06 check_reload_status updating dyndns wan
Aug 8 09:14:06 check_reload_status Reloading filter
Aug 8 09:14:07 php-fpm 86172 /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 192.168.65.132 -> 192.168.65.132 - Restarting packages.
Aug 8 09:14:07 check_reload_status Starting packages
Aug 8 09:14:08 php-fpm 86172 /rc.start_packages: Restarting/Starting all packages.
Aug 8 09:22:40 sshd 13916 user admin login class [preauth]
Aug 8 09:22:44 sshd 13916 user admin login class [preauth]
Aug 8 09:22:45 sshd 13916 Accepted password for admin from 10.10.10.11 port 51077 ssh2 -
-
I still don't see where you have created the custom conf file and run usbconfig against that like it shows here:
https://forum.netgate.com/post/99859It's not going to change mode until you do that.
Steve
