driving me mental, remote login to pfsense CLI to shutdown
-
Reinstalled the package and now I can execute the shutdown script without a password.
I still cannot login via ssh without a password, despite using the ssh-keygen utility and a copy of the key over. it works for a few minutes then stops working. Very bizzare!
-
I always login via public key when I ssh.. Not a fan of passwords and ssh - have had zero issue doing this on any pfsense going back to like 1 ;)
Your saying it lets you log in with public key, and then you go to login again and it doesn't? Do a ssh -vvv when you attempt to login.. what do you get? Or what does the pfsense log say about it after you can not login.
-
LOTS of output hahah!
nsautomate@ihp:/etc/openhab2/rules$ sudo -u openhab ssh -vvv nsautomate@192.168.1.254 'sudo shutdown -h now' OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n 7 Dec 2017 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: resolving "192.168.1.254" port 22 debug2: ssh_connect_direct: needpriv 0 debug1: Connecting to 192.168.1.254 [192.168.1.254] port 22. debug1: Connection established. debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_rsa type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_rsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_dsa type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_dsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ed25519 type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ed25519-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3 debug1: Remote protocol version 2.0, remote software version OpenSSH_7.5 debug1: match: OpenSSH_7.5 pat OpenSSH* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug1: Authenticating to 192.168.1.254:22 as 'nsautomate' debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts" debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys from 192.168.1.254 debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519 debug3: send packet: type 20 debug1: SSH2_MSG_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2_MSG_KEXINIT received debug2: local client KEXINIT proposal debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,zlib@openssh.com,zlib debug2: compression stoc: none,zlib@openssh.com,zlib debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256 debug2: host key algorithms: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ssh-ed25519 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr debug2: MACs ctos: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com debug2: MACs stoc: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com debug2: compression ctos: none,zlib@openssh.com debug2: compression stoc: none,zlib@openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug1: kex: algorithm: curve25519-sha256@libssh.org debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug3: send packet: type 30 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug3: receive packet: type 31 debug1: Server host key: ssh-ed25519 SHA256:4RCz4gQY4LJRdlMC2Y1ix0IqQp1zR/pQEo8gkSXC0sw debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts" debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys from 192.168.1.254 debug1: Host '192.168.1.254' is known and matches the ED25519 host key. debug1: Found key in /var/lib/openhab2/.ssh/known_hosts:1 debug3: send packet: type 21 debug2: set_newkeys: mode 1 debug1: rekey after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: receive packet: type 21 debug1: SSH2_MSG_NEWKEYS received debug2: set_newkeys: mode 0 debug1: rekey after 134217728 blocks debug2: key: /var/lib/openhab2/.ssh/id_rsa ((nil)) debug2: key: /var/lib/openhab2/.ssh/id_dsa ((nil)) debug2: key: /var/lib/openhab2/.ssh/id_ecdsa ((nil)) debug2: key: /var/lib/openhab2/.ssh/id_ed25519 ((nil)) debug3: send packet: type 5 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521> debug3: receive packet: type 6 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /var/lib/openhab2/.ssh/id_rsa debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519 debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug3: send packet: type 50 debug2: we sent a keyboard-interactive packet, wait for reply debug3: receive packet: type 60 debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 -
@automate said in driving me mental, remote login to pfsense CLI to shutdown:
debug1: Next authentication method: publickey
debug1: Trying private key: /var/lib/openhab2/.ssh/id_rsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa
debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory
debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519
debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directory
debug2: we did not send a packet, disable methodWell your not sending your public key - so yeah going to fail!
debug1: Offering public key: /home/johnpoz/.ssh/id_ed25519 ED25519 SHA256:y1pJFK<snipped> debug3: send packet: type 50 debug2: we sent a publickey packet, wait for reply debug3: receive packet: type 60 debug1: Server accepts key: /home/johnpoz/.ssh/id_ed25519 ED25519 SHA256:y1pJF<snipped> debug3: sign_and_send_pubkey: ED25519 SHA256:y1pJFKtYk+f2<snipped> debug3: sign_and_send_pubkey: signing using ssh-ed25519 debug3: send packet: type 50 debug3: receive packet: type 52 debug1: Authentication succeeded (publickey). Authenticated to sg4860.local.lan ([192.168.9.253]:22). -
scratching head
Im not sure what im doing wrong. Can you point me to some kind of tutorial john to do that? I was under the impression i was
-
If your environment doesn't auto find the key to send, then you would have to call it out in your cmd line for ssh.
btw: you don't need to send that direct command, you can just run /etc/rc.halt
-
I followed this:
https://www.tecmint.com/ssh-passwordless-login-using-ssh-keygen-in-5-easy-steps/
-
Yeah those guides tell you how to set it up, no need for me to even read it - but your ssh client has to know where the key it is to use.. See how it pulls my key from my home dir..
Setup your local environment to use the key(s) you want.. Be it windows or linux... Im running openssh client on windows..
There is a .ssh dir in c:\users\username - this is where you keys would normally go
-
Thats not going to work.
This is a non interactive setup, what happens is my linux machine (with openhab) runs a script which executes this command as the 'nsautomate' user.
Theres no ability for me to specify keys etc, because its not occuring like that.
What im doing right now is simply 'testing' the command via a shell, but the end state is the openhab user will run this command
-
Well its going to have to be able to send the key, or how would it possible to auth..
-
i thought the keys were saved using the link i mentioned above to the local and remote machine, so when it logs in, its there. That was the whole point.
I used the ssh copy etc
-
I think you should research how public key auths.. Yes there is part on the server that you saved on pfsense, but the client has to send the other part to actually auth.
Running this on linux you can call out in the path directly or the envirnoment of the user running ssh would have it in their path.. You can see when you ran the script where it looked for the key.. Place your private side there.
when you ran the cmd it was looking here for keys it could send
Trying private key: /var/lib/openhab2yeah when you created the keys, sure you saved it somewhere - but it has to be specified where it is and its name in the cmd you run, or the enviornment of the system needs to know where to find it, ie your /var/lib/openhab2 dir is where it was looking for the keys it could send because you didn't call it out in the cmd.
-i would call out path/file to use to auth with from the cmd line with ssh
-
@johnpoz OK, so i copied the key to that directory and the same issue persists.
-
And your sending the key - what does -vvv show you for the process
-
After the copy...
nsautomate@ihp:/etc/openhab2/rules$ sudo -u openhab ssh -vvv nsautomate@192.168.1.254 'sudo etc/rc.halt' OpenSSH_7.6p1 Ubuntu-4ubuntu0.3, OpenSSL 1.0.2n 7 Dec 2017 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug2: resolving "192.168.1.254" port 22 debug2: ssh_connect_direct: needpriv 0 debug1: Connecting to 192.168.1.254 [192.168.1.254] port 22. debug1: Connection established. debug1: identity file /var/lib/openhab2/.ssh/id_rsa type 0 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_rsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_dsa type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_dsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ecdsa-cert type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ed25519 type -1 debug1: key_load_public: No such file or directory debug1: identity file /var/lib/openhab2/.ssh/id_ed25519-cert type -1 debug1: Local version string SSH-2.0-OpenSSH_7.6p1 Ubuntu-4ubuntu0.3 debug1: Remote protocol version 2.0, remote software version OpenSSH_7.5 debug1: match: OpenSSH_7.5 pat OpenSSH* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug1: Authenticating to 192.168.1.254:22 as 'nsautomate' debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts" debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys from 192.168.1.254 debug3: order_hostkeyalgs: prefer hostkeyalgs: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519 debug3: send packet: type 20 debug1: SSH2_MSG_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2_MSG_KEXINIT received debug2: local client KEXINIT proposal debug2: KEX algorithms: curve25519-sha256,curve25519-sha256@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c debug2: host key algorithms: ssh-ed25519-cert-v01@openssh.com,ssh-ed25519,ecdsa-sha2-nistp256-cert-v01@openssh.com,ecdsa-sha2-nistp384-cert-v01@openssh.com,ecdsa-sha2-nistp521-cert-v01@openssh.com,ssh-rsa-cert-v01@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,rsa-sha2-512,rsa-sha2-256,ssh-rsa debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes128-ctr,aes192-ctr,aes256-ctr,aes128-gcm@openssh.com,aes256-gcm@openssh.com debug2: MACs ctos: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: umac-64-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,hmac-sha1-etm@openssh.com,umac-64@openssh.com,umac-128@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,zlib@openssh.com,zlib debug2: compression stoc: none,zlib@openssh.com,zlib debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: curve25519-sha256@libssh.org,diffie-hellman-group-exchange-sha256 debug2: host key algorithms: ssh-rsa,rsa-sha2-512,rsa-sha2-256,ssh-ed25519 debug2: ciphers ctos: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr debug2: ciphers stoc: chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes128-gcm@openssh.com,aes256-ctr,aes192-ctr,aes128-ctr debug2: MACs ctos: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com debug2: MACs stoc: hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com debug2: compression ctos: none,zlib@openssh.com debug2: compression stoc: none,zlib@openssh.com debug2: languages ctos: debug2: languages stoc: debug2: first_kex_follows 0 debug2: reserved 0 debug1: kex: algorithm: curve25519-sha256@libssh.org debug1: kex: host key algorithm: ssh-ed25519 debug1: kex: server->client cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug1: kex: client->server cipher: chacha20-poly1305@openssh.com MAC: <implicit> compression: none debug3: send packet: type 30 debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug3: receive packet: type 31 debug1: Server host key: ssh-ed25519 SHA256:4RCz4gQY4LJRdlMC2Y1ix0IqQp1zR/pQEo8gkSXC0sw debug3: hostkeys_foreach: reading file "/var/lib/openhab2/.ssh/known_hosts" debug3: record_hostkey: found key type ED25519 in file /var/lib/openhab2/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys from 192.168.1.254 debug1: Host '192.168.1.254' is known and matches the ED25519 host key. debug1: Found key in /var/lib/openhab2/.ssh/known_hosts:1 debug3: send packet: type 21 debug2: set_newkeys: mode 1 debug1: rekey after 134217728 blocks debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug3: receive packet: type 21 debug1: SSH2_MSG_NEWKEYS received debug2: set_newkeys: mode 0 debug1: rekey after 134217728 blocks debug2: key: /var/lib/openhab2/.ssh/id_rsa (0x5628d47cd480) debug2: key: /var/lib/openhab2/.ssh/id_dsa ((nil)) debug2: key: /var/lib/openhab2/.ssh/id_ecdsa ((nil)) debug2: key: /var/lib/openhab2/.ssh/id_ed25519 ((nil)) debug3: send packet: type 5 debug3: receive packet: type 7 debug1: SSH2_MSG_EXT_INFO received debug1: kex_input_ext_info: server-sig-algs=<ssh-ed25519,ssh-rsa,rsa-sha2-256,rsa-sha2-512,ssh-dss,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521> debug3: receive packet: type 6 debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password,keyboard-interactive debug3: start over, passed a different list publickey,password,keyboard-interactive debug3: preferred gssapi-keyex,gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Offering public key: RSA SHA256:9I6DoJ7tHV07ZgZZlNYbiEFHT2BlRHFOp2rhQ+GI8I4 /var/lib/openhab2/.ssh/id_rsa debug3: send_pubkey_test debug3: send packet: type 50 debug2: we sent a publickey packet, wait for reply debug3: receive packet: type 60 debug1: Server accepts key: pkalg rsa-sha2-512 blen 279 debug2: input_userauth_pk_ok: fp SHA256:9I6DoJ7tHV07ZgZZlNYbiEFHT2BlRHFOp2rhQ+GI8I4 debug3: sign_and_send_pubkey: RSA SHA256:9I6DoJ7tHV07ZgZZlNYbiEFHT2BlRHFOp2rhQ+GI8I4 debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519 debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod_lookup keyboard-interactive debug3: remaining preferred: password debug3: authmethod_is_enabled keyboard-interactive debug1: Next authentication method: keyboard-interactive debug2: userauth_kbdint debug3: send packet: type 50 debug2: we sent a keyboard-interactive packet, wait for reply debug3: receive packet: type 60 debug2: input_userauth_info_req debug2: input_userauth_info_req: num_prompts 1 Password for nsautomate@pfSense.rkeen.ddns.net: -
And as you can clearly SEE, its not finding it..
debug3: no such identity: /var/lib/openhab2/.ssh/id_rsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_dsa debug3: no such identity: /var/lib/openhab2/.ssh/id_dsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ecdsa debug3: no such identity: /var/lib/openhab2/.ssh/id_ecdsa: No such file or directory debug1: Trying private key: /var/lib/openhab2/.ssh/id_ed25519 debug3: no such identity: /var/lib/openhab2/.ssh/id_ed25519: No such file or directoryI am not understanding what part your getting lost in here.. the debug clearly shows you nothing is being sent.. So how could you auth??
-
I copied as you mentioned, it shows id_rsa.pub under the folder it was looking for and theres a key in there.
-
Oh it did send something.
debug2: we sent a publickey packet, wait for reply debug3: receive packet: type 60 debug1: Server accepts key: pkalg rsa-sha2-512 blen 279 debug2: input_userauth_pk_ok: fp SHA256:9I6DoJ7tHV07ZgZZlNYbiEFHT2BlRHFOp2rhQ+GI8I4 debug3: sign_and_send_pubkey: RSA SHA256:9I6DoJ7tHV07ZgZZlNYbiEFHT2BlRHFOp2rhQ+GI8I4But don't think it liked it ;)
Give me a sec to digest
-
of course it didnt. You need to be a brain surgeon with a degree in rocket science to get this sh1t working. Seriously wheres the nearest cliff so I can throw myself and the machine off it!
-
No you don't need to be a brain surgeon... This pretty basic stuff ;)
RSA - yeah prob no longer even accepted.. that guide is from what 2015...
