Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Official Realtek Driver Binary 1.95 For 2.4.4 Release

    Scheduled Pinned Locked Moved Hardware
    194 Posts 52 Posters 116.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • N
      Napsterbater @krackpot
      last edited by

      @krackpot I have two systems running with this driver one on a 200mbps link one on a 300mbps, neither have trouble hitting those speeds.

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        That sounds more like something is actually linking at 100Mb. That NIC should pass far more than that with either driver.

        Steve

        1 Reply Last reply Reply Quote 1
        • G
          gordon
          last edited by

          Have 2.4.4-RELEASE-p3 the latest driver for RTL8111G or must I manualy update the driver to latest version?

          I have problem WAN port stop working, disable the port and enable and it start working again... its happens with low load 10mbit maybe... within 1 hour or so...

          1 Reply Last reply Reply Quote 0
          • kiokomanK
            kiokoman LAYER 8
            last edited by kiokoman

            you need to manually update https://drive.google.com/open?id=1lBg8AIRiRfGBGeXe9kgKtAAma0VjiYfC
            copy to /boot/kernel , rename to if_re.ko
            kldload if_re.ko
            or build it yourself

            to load it at boot
            edit /boot/loader.conf.local
            and paste
            if_re_load=“YES"

            personally i've lost patience with realtek and at the end i bought an intel card

            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
            Please do not use chat/PM to ask for help
            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

            G 1 Reply Last reply Reply Quote 2
            • G
              gordon @kiokoman
              last edited by

              @kiokoman said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

              you need to manually update https://drive.google.com/open?id=1lBg8AIRiRfGBGeXe9kgKtAAma0VjiYfC
              copy to /boot/kernel , rename to if_re.ko
              kldload if_re.ko
              or build it yourself

              to load it at boot
              edit /boot/loader.conf.local
              and paste
              if_re_load=“YES"

              personally i've lost patience with realtek and at the end i bought an intel card

              /root: kldstat
              Id Refs Address Size Name
              1 5 0xffffffff80200000 2ddcbe8 kernel
              2 1 0xffffffff82fde000 7d290 if_re.ko
              3 1 0xffffffff839fa000 10a0 cpuctl.ko

              Is the drive active now ?

              1 Reply Last reply Reply Quote 0
              • kiokomanK
                kiokoman LAYER 8
                last edited by

                yes

                ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                Please do not use chat/PM to ask for help
                we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                G 2 Replies Last reply Reply Quote 0
                • G
                  gordon @kiokoman
                  last edited by

                  @kiokoman said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                  yes

                  These should be it ?

                  Now can I go to bad, and see if internett is still working tomorrow morning :)

                  Thank you very much !

                  G 1 Reply Last reply Reply Quote 0
                  • G
                    gordon @gordon
                    last edited by

                    @gordon

                    The problem is still present...
                    Strange it is only a problem with WAN (re1) and not LAN (re0)...

                    1 Reply Last reply Reply Quote 0
                    • G
                      gordon
                      last edited by gordon

                      [2.4.4-RELEASE][root@firewall.test.net]/root: grep re1 /var/run/dmesg.boot
                      re1: <Realtek PCIe GBE Family Controller> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci3
                      re1: Using Memory Mapping!
                      re1: Using 1 MSI-X message
                      re1: ASPM disabled
                      re1: version:1.95.00
                      re1: Ethernet address: 00:1e:06:45:02:83
                      re1: Ethernet address: 00:1e:06:45:02:83

                      [2.4.4-RELEASE][root@firewall.test.net]/root: route -n
                      route: usage: route [-46dnqtv] command [[modifiers] args]

                      [2.4.4-RELEASE][root@firewall.test.net]/root: arp -an | grep re1
                      ? (92.221.80.253) at 00:1e:06:45:02:83 on re1 permanent [ethernet]
                      ? (92.221.80.1) at 00:02:00:01:00:01 on re1 expires in 97 seconds [ethernet]

                      [2.4.4-RELEASE][root@firewall.test.net]/root: tcpdump -c 20 -n -i re1
                      tcpdump: verbose output suppressed, use -v or -vv for full protocol decode
                      listening on re1, link-type EN10MB (Ethernet), capture size 262144 bytes
                      03:49:11.244621 IP 92.221.80.253.49228 > XX.XX.XX.XX.XXX: 26302+ XXXXXXX (91)
                      03:49:11.244626 IP 92.221.80.253.49228 > XX.XX.XX.XX.XXX: 26302+ XXXXXXX. (91)
                      03:49:11.246135 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 28630+ XXXXXXX. (35)
                      03:49:11.246139 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 28630+ XXXXXXX. (35)
                      03:49:11.262982 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 42079+ XXXXXXX. (57)
                      03:49:11.262985 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 42079+ XXXXXXX. (57)
                      03:49:11.263013 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 23104+ XXXXXXX. (53)
                      03:49:11.263016 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 23104+ XXXXXXX. (53)
                      03:49:11.413788 IP 92.221.80.253.25525 > 109.247.114.4.53: 46408+ XXXXXXX. (41)
                      03:49:11.413793 IP 92.221.80.253.25525 > 92.220.228.70.53: 46408+ XXXXXXX. (41)
                      03:49:11.413823 IP 92.221.80.253.25525 > 109.247.114.4.53: 30408+ XXXXXXX. (41)
                      03:49:11.413826 IP 92.221.80.253.25525 > 92.220.228.70.53: 30408+ XXXXXXX. (41)
                      03:49:11.414619 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 9197+ XXXXXXX. (31)
                      03:49:11.414622 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 9197+ XXXXXXX. (31)
                      03:49:11.414695 IP 92.221.80.253.36009 > XX.XX.XX.XX.XXX: 247+ XXXXXXX. (31)
                      03:49:11.414699 IP 92.221.80.253.36009 > XX.XX.XX.XX.XXX: 247+ XXXXXXX. (31)
                      03:49:11.490012 IP 92.221.80.253.49228 > XX.XX.XX.XX.XXX: 26302+ XXXXXXX. (91)
                      03:49:11.490015 IP 92.221.80.253.49228 > XX.XX.XX.XX.XXX: 26302+ XXXXXXX. (91)
                      03:49:11.491250 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 28630+ XXXXXXX. (35)
                      03:49:11.491253 IP 92.221.80.253.25525 > XX.XX.XX.XX.XXX: 28630+ XXXXXXX. (35)
                      20 packets captured
                      20 packets received by filter
                      0 packets dropped by kernel

                      1 Reply Last reply Reply Quote 0
                      • G
                        gordon @kiokoman
                        last edited by

                        @kiokoman are you sure the driver has been loaded ?
                        Just that I facing the same problem after also....

                        1 Reply Last reply Reply Quote 0
                        • stephenw10S
                          stephenw10 Netgate Administrator
                          last edited by

                          @gordon said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                          re1: version:1.95.00

                          It shows it's loaded there. The FreeBSD in kernel driver doesn't show the version as far as I know. I only have 2.5 dev box up right now but:

                          [2.5.0-DEVELOPMENT][root@apu.stevew.lan]/root: grep re1 /var/run/dmesg.boot
re1: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xf7c00000-0xf7c00fff,0xf7b00000-0xf7b03fff irq 17 at device 0.0 on pci2
re1: Using 1 MSI-X message
re1: ASPM disabled
re1: Chip rev. 0x2c000000
re1: MAC rev. 0x00200000
miibus1: <MII bus> on re1
re1: Using defaults for TSO: 65518/35/2048
re1: Ethernet address: 00:0d:b9:89:3f:11
re1: netmap queues/slots: TX 1/256, RX 1/256

                          Try commenting out the line in loader.conf.local and rebooting.

                          Steve

                          1 Reply Last reply Reply Quote 0
                          • kiokomanK
                            kiokoman LAYER 8
                            last edited by kiokoman

                            @gordon said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                            [2.4.4-RELEASE][root@firewall.test.net]/root: grep re1 /var/run/dmesg.boot
                            re1: <Realtek PCIe GBE Family Controller> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci3
                            re1: Using Memory Mapping!
                            re1: Using 1 MSI-X message
                            re1: ASPM disabled
                            > re1: version:1.95.00
                            re1: Ethernet address: 00:1e:06:45:02:83
                            re1: Ethernet address: 00:1e:06:45:02:83

                            yes it is like stephenw10 say,
                            version 1.95.00 is the official driver, the one shipped with freebsd does not output the version when it load

                            ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                            Please do not use chat/PM to ask for help
                            we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                            Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                            G 1 Reply Last reply Reply Quote 0
                            • G
                              gordon @kiokoman
                              last edited by

                              @kiokoman said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                              @gordon said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                              [2.4.4-RELEASE][root@firewall.test.net]/root: grep re1 /var/run/dmesg.boot
                              re1: <Realtek PCIe GBE Family Controller> port 0xd000-0xd0ff mem 0xa1104000-0xa1104fff,0xa1100000-0xa1103fff at device 0.0 on pci3
                              re1: Using Memory Mapping!
                              re1: Using 1 MSI-X message
                              re1: ASPM disabled
                              > re1: version:1.95.00
                              re1: Ethernet address: 00:1e:06:45:02:83
                              re1: Ethernet address: 00:1e:06:45:02:83

                              yes it is like stephenw10 say,
                              version 1.95.00 is the official driver, the one shipped with freebsd does not output the version when it load

                              Thank you,

                              I reinstalled pfsense today and are using WAN on re0 instead of re1 and LAN on re1, so fare so fare, new record in uptime... cross my fingers....

                              But I cannot understand these shall make any different ?

                              1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator
                                last edited by

                                The driver provided by Realtek can commonly help if you're seeing watchdog timeout errors. But it sounds like that's not what you're seeing so it may not make any difference here. You have nothing to lose by trying it though.

                                Steve

                                G 1 Reply Last reply Reply Quote 0
                                • G
                                  gordon @stephenw10
                                  last edited by gordon

                                  @stephenw10
                                  Problem is still present, card stop working and report DOWN in status under

                                  Remember both card is identical network card... strange it’s only WAN card who goes down.

                                  Have now tried disabling «Disable hardware checksum offload»

                                  Is it possible to make the card recycle DISABLE and then ENABLE when these happens, way around the problem until I find a fix?

                                  G 1 Reply Last reply Reply Quote 0
                                  • G
                                    gordon @gordon
                                    last edited by

                                    «Disable hardware checksum
                                    Was not fixing the problem....

                                    Does anybody know how I can auto disable and enable the card when it goes down?

                                    1 Reply Last reply Reply Quote 0
                                    • kiokomanK
                                      kiokoman LAYER 8
                                      last edited by

                                      try with
                                      /etc/rc.d/netif restart re0

                                      ̿' ̿'\̵͇̿̿\з=(◕_◕)=ε/̵͇̿̿/'̿'̿ ̿
                                      Please do not use chat/PM to ask for help
                                      we must focus on silencing this @guest character. we must make up lies and alter the copyrights !
                                      Don't forget to Upvote with the 👍 button for any post you find to be helpful.

                                      G 1 Reply Last reply Reply Quote 0
                                      • G
                                        gordon @kiokoman
                                        last edited by gordon

                                        @kiokoman said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                                        try with
                                        /etc/rc.d/netif restart re0

                                        Thank you, I need some script to detect when it shall happens also...

                                        I found some things to try another place on these forum, so I have added these lines to the boot config:
                                        net.inet.tcp.tso=0
                                        hw.pci.enable_msix=0
                                        hw.pci.enable_msi=0
                                        hw.re.tso_enable=0

                                        to the boot loader config, and for now I haven`t seen the issue again, need more hours... will report back later.

                                        1 Reply Last reply Reply Quote 0
                                        • stephenw10S
                                          stephenw10 Netgate Administrator
                                          last edited by

                                          Yes, definitely disable all hardware offloading features. Check what is still enabled using ifconfig re1.

                                          Did you try re-assigning the NICs? Does the fault follow re1 or remain on WAN?
                                          It's likely you are downloading far more traffic that uploading. Whichever NIC is WAN is doing the receiving of that traffic and a number of those hardware offloading features are receive only.

                                          Steve

                                          G 1 Reply Last reply Reply Quote 1
                                          • G
                                            gordon @stephenw10
                                            last edited by gordon

                                            @stephenw10 said in Official Realtek Driver Binary 1.95 For 2.4.4 Release:

                                            Yes, definitely disable all hardware offloading features. Check what is still enabled using ifconfig re1.

                                            Did you try re-assigning the NICs? Does the fault follow re1 or remain on WAN?
                                            It's likely you are downloading far more traffic that uploading. Whichever NIC is WAN is doing the receiving of that traffic and a number of those hardware offloading features are receive only.

                                            Steve

                                            I reinstalled the whole pfsense yesterday and then I swapped so re0 is WAN and re1 is LAN.
                                            The problem have always followed the card I have assigned to be WAN.

                                            The problem has not accour after I disabled al the things mention above from the HW i the boot loader. But there is a strange thing the uptime on the box is never 1 hour and 47 minutes, but I have not restarted the box today..... I think there are something wrong with the clock... its not going correct... it`s deviate more and more from the "real time"....

                                            Maybe there is a releation here ? lead time on the DHCP maybe got problem...

                                            I will look into getting the clock correct first.

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.