Scripting the behaviour of Status --> Interfaces --> DHCP renew button

bradtpt

Ahh ok, unfortunately netgate don't leave old versions online, I'll have to go digging and see if I can find a i386 installer kicking around somewhere. If you have a link or can dropbox it to me or similar let me know.
-edit- I just found this: https://mirrors.xmission.com/pfsense/downloads/pfSense-CE-2.3.5-RELEASE-i386.iso.gz and this: https://mirrors.xmission.com/pfsense/downloads/pfSense-CE-memstick-2.3.5-RELEASE-i386.img.gz so it looks like we're in luck.

stephenw10

I would be surprised if there's any difference between the 32bit and 64bit versions as far as this modem is concerned. The available tools should be identical.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

I would be surprised if there's any difference between the 32bit and 64bit versions as far as this modem is concerned. The available tools should be identical.

Steve

I test this modem through vm pfsense 2.4 , ue0 and cdc showed up..I wonder if there is any new patch from 2.4 if_cdce.ko that was not included in 2.3.5

can you look at this: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=192345

stephenw10

There are many, many differences between FreeBSD 10.3 and 11.1 which is what you're comparing there.

That link is broken.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

There are many, many differences between FreeBSD 10.3 and 11.1 which is what you're comparing there.

That link is broken.

Steve

the patch includes

head/sys/dev/usb/net/if_cdce.c
head/sys/dev/usb/serial/u3g.c
head/sys/dev/usb/serial/umodem.c

hope someone could port this patch on 2.3.5

stephenw10

Your link was actually good, the bug server was down at that exact moment I tested.

Porting that is non trivial. You would have to rebuild a whole number of things there. You cannot just load a replacement module. And even after you had done that you would still be running unsupported, unpatched, 2.3.5.

Is there some reason you cannot just replace that ALIX with something vaguely current?

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

Your link was actually good, the bug server was down at that exact moment I tested.

Porting that is non trivial. You would have to rebuild a whole number of things there. You cannot just load a replacement module. And even after you had done that you would still be running unsupported, unpatched, 2.3.5.

Is there some reason you cannot just replace that ALIX with something vaguely current?

Steve

This alix will be deployed on our client’s remote area maybe this end of the month.I’ll convince him if he can rather buy a new hardware..I may use openwrt with this 4g stick if he refuse to shell out some $

stephenw10

If you need to use the ALIX that is what I would do. At least you can have a current build on there that will be relatively secure.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

If you need to use the ALIX that is what I would do. At least you can have a current build on there that will be relatively secure.

Steve

hmm can you please look at this,,upon setting this modem AT^SETPORT="FF;16,12,10" suddenly I have this in my log:

ugen1.2: <HUAWEIMOBILE> at usbus1
u3g0: <NCM Network Control Model> on usbus1
u3g0: Found 2 ports.

previously I dont have this log when I set this AT^SETPORT="FF;10,12,16" on my modem..But still no ue0 interface![alt text]

on my vm pf 2.4.4 :

stephenw10

You probably still need the newer cdce driver.

Steve

jly2680

@stephenw10
I compare 2.3.5 dev.d/usb.conf from 2.4.4 , my modem intsubclass and intproto is included on 2.4.4 usb conf and missing on 2.3.5 ..can I add this on my 2.3.5 usbconf??

nomatch 32 {
	match "bus" "uhub[0-9]+";
	match "mode" "host";
	match "vendor" "0x12d1";
	match "intclass" "0xff";
	match "intsubclass" "0x03";
	match "intprotocol" "0x16";
	action "kldload -n if_cdce";

stephenw10

As a test I can't see why not. I've never tried that myself though...

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

As a test I can't see why not. I've never tried that myself though...

it didn’t work..I think there’s no ncm kernel module for 0x12d1 Sub=03 Prot=16..

--- /usr/src/sys/dev/usb/net/if_cdce.c	(revision 326479)
+++ /usr/src/sys/dev/usb/net/if_cdce.c	(working copy)
@@ -276,14 +276,13 @@
 	{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SLC750, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
 
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x16),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x16)},
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x46),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x46)},
 	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
-		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x76),
-		USB_DRIVER_INFO(0)},
+		USB_IFACE_SUBCLASS(0x02), USB_IFACE_PROTOCOL(0x76)},
+	{USB_VENDOR(USB_VENDOR_HUAWEI), USB_IFACE_CLASS(UICLASS_VENDOR),
+		USB_IFACE_SUBCLASS(0x03), USB_IFACE_PROTOCOL(0x16)},

Is there any possibility I can recompile and patch this cdc driver?

stephenw10

You can try it in a FreeBSD 10.3 box. I have done so with other drivers and loaded them as kernel modules.

I've never seen it done with a USB device though.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

You can try it in a FreeBSD 10.3 box. I have done so with other drivers and loaded them as kernel modules.

I've never seen it done with a USB device though.

Steve

If you dont mind can you guide me , I already made an svn checkout on 10.3 , no idea how to apply the patch,and if I compile it succcessfully , I can donate a little some beers..

stephenw10

Basically as I described here: https://forum.netgate.com/post/712896

But obviously not for urndis as was that case.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

Basically as I described here: https://forum.netgate.com/post/712896

But obviously not for urndis as was that case.

Steve

I applied the patch and compiled it..test the driver on vm freebsd 10.3 and it was detected and ue0 interface came up..but when I use this driver on pfsense ,, still same issue .. Do I need more drivers to be copy to pfsense?

stephenw10

Maybe. You compiled just the cdce module in FreeBSD?

Maybe it didn't load as expected in pfSense? You have to load it at boot time to replace the in kernel driver.

Steve

jly2680

@stephenw10 said in Scripting the behaviour of Status --> Interfaces --> DHCP renew button:

Maybe. You compiled just the cdce module in FreeBSD?

Maybe it didn't load as expected in pfSense? You have to load it at boot time to replace the in kernel driver.

Steve

yup only the cdce driver..I add this line if_cdce_load="YES" on boot/loader.conf and copy the compiled driver at boot/kernel..I can see the message that it is loaded on boot

Loading /boot/defaults/loader.conf
/boot/kernel/kernel text=0x122025a data=0x84738c+0xd9688 syms=[0x4+0xf3aa0+0x4+0                                                                                        x16b822]
/boot/kernel/if_cdce.ko text=0x35e0 data=0x164+0x4 syms=[0x4+0x920+0x4+0x9ff]

and to be sure , I fresh install 10.3 , imported the compiled driver,and eu0 interface came up..but not with pfsense

stephenw10

Hmm, well something is different there then.

You could check what we were using at that time which I believe is here: https://github.com/pfsense/FreeBSD-src/tree/RELENG_2_3

Steve