Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NEW CARP Setup seems to have a mind of it's own and secret firewall rules - limited/no logs

    Scheduled Pinned Locked Moved HA/CARP/VIPs
    24 Posts 2 Posters 2.4k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DerelictD Offline
      Derelict LAYER 8 Netgate
      last edited by

      Start with one wan and one lan. Get that that working then move on.

      Chattanooga, Tennessee, USA
      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
      Do Not Chat For Help! NO_WAN_EGRESS(TM)

      1 Reply Last reply Reply Quote 0
      • H Offline
        Hass
        last edited by

        Thanks @Derelict we actually did that and that was fine, it was really just once we implemented CARP has things all gone strange and I don't know the best way to reset it.

        It is better to brake the HA cluster and role it back to a single node?

        Also do you have any idea how I can trace a rule that doesn't come up with pfctl -vvsr

        Thanks for the quick reply

        Hass

        4c0493d0-a793-4c5c-a986-8e7318fa1734-image.png

        1 Reply Last reply Reply Quote 0
        • DerelictD Offline
          Derelict LAYER 8 Netgate
          last edited by

          What does hovering over the red X say?

          Chattanooga, Tennessee, USA
          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
          Do Not Chat For Help! NO_WAN_EGRESS(TM)

          1 Reply Last reply Reply Quote 0
          • DerelictD Offline
            Derelict LAYER 8 Netgate
            last edited by Derelict

            I was talking about implementing CARP on one WAN and one LAN then moving on to the multi-wan/lan configuration. Better to do two interfaces incorrectly than to do 20 only to find out they're all done wrong.

            Chattanooga, Tennessee, USA
            A comprehensive network diagram is worth 10,000 words and 15 conference calls.
            DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
            Do Not Chat For Help! NO_WAN_EGRESS(TM)

            1 Reply Last reply Reply Quote 0
            • H Offline
              Hass
              last edited by

              Sorry I had to wait before it would let me post again///

              f25e3f78-c06c-4066-b442-36d3629fbc29-image.png

              1 Reply Last reply Reply Quote 0
              • H Offline
                Hass
                last edited by

                This is a quick diagram, doesn't show all the access layer etc..

                47381efe-a576-4d79-be02-33da44e84a15-image.png

                1 Reply Last reply Reply Quote 0
                • DerelictD Offline
                  Derelict LAYER 8 Netgate
                  last edited by

                  OK that tells us nothing about how you have it configured.

                  Chattanooga, Tennessee, USA
                  A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                  DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                  Do Not Chat For Help! NO_WAN_EGRESS(TM)

                  H 1 Reply Last reply Reply Quote 0
                  • H Offline
                    Hass @Derelict
                    last edited by

                    @Derelict I know, notes coming!

                    1 Reply Last reply Reply Quote 0
                    • DerelictD Offline
                      Derelict LAYER 8 Netgate
                      last edited by

                      does grep 1566102523 /tmp/rules.debug show anything?

                      Chattanooga, Tennessee, USA
                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                      1 Reply Last reply Reply Quote 0
                      • H Offline
                        Hass
                        last edited by

                        @Derelict nope it returns nothing and when I look in the debug file again I don't see that rule.

                        FYI, the other item I'm not sure we changed was to edit the manual outbound NAT rules in the same way we did for the WAN it from the interface to the VIP. I just thought of that, not sure how that relates to these lost rules

                        1 Reply Last reply Reply Quote 0
                        • DerelictD Offline
                          Derelict LAYER 8 Netgate
                          last edited by

                          No idea what that means. You only need outbound NAT for WANs in general.

                          Chattanooga, Tennessee, USA
                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                          1 Reply Last reply Reply Quote 0
                          • H Offline
                            Hass
                            last edited by

                            thanks, that answers that then!

                            1 Reply Last reply Reply Quote 0
                            • DerelictD Offline
                              Derelict LAYER 8 Netgate
                              last edited by Derelict

                              Set outbound NAT on WANs to a CARP VIP for sources that need NAT (inside networks, etc. NOT localhost or the WAN subnet or source any)

                              Set DHCP to give a LAN CARP VIP as the default gateway to inside hosts.

                              Set DHCP to give a CARP VIP as the DNS server to inside hosts if you are using pfSense for DNS.

                              Configure the failover peer in the DHCP servers on the Primary to the IP address ON THAT INTERFACE on the secondary.

                              Configure XMLRPC sync on the sync interface on the primary to the secondary - not the other way around.

                              Configure pfsync on the sync interface bidirectionally on both nodes.

                              That's pretty much it.

                              Chattanooga, Tennessee, USA
                              A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                              DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                              Do Not Chat For Help! NO_WAN_EGRESS(TM)

                              1 Reply Last reply Reply Quote 0
                              • H Offline
                                Hass
                                last edited by

                                Thanks @Derelict I'll step through this all again now and check them off, the only one I know didn't work the last time was DNS (line below). But I'll test that agin on a VLAN now being used. FYI, we're using DNS Resolver (within pfSense)

                                Set DHCP to give a CARP VIP as the DNS server to inside hosts if you are using pfSense for DNS.

                                1 Reply Last reply Reply Quote 0
                                • DerelictD Offline
                                  Derelict LAYER 8 Netgate
                                  last edited by Derelict

                                  It should work for DNS to send them to both nodes' interface addresses but if one is down it will have to time out and might induce client-perceptible delays. If you want multiple DNS servers for your clients my suggestion would be to put them on something off the firewall/HA pair, such as dedicated unbound/BIND servers, domain controllers, etc.

                                  Chattanooga, Tennessee, USA
                                  A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                  DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                  Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                  1 Reply Last reply Reply Quote 0
                                  • H Offline
                                    Hass
                                    last edited by

                                    @Derelict Yes understood and we tried to set it to the CARP vip it just didn't provide an DNS resolution. But testing again now

                                    1 Reply Last reply Reply Quote 0
                                    • DerelictD Offline
                                      Derelict LAYER 8 Netgate
                                      last edited by

                                      You can always just dig @carp_vip www.google.com from an inside host to see if unbound is listening there. It should be.

                                      Chattanooga, Tennessee, USA
                                      A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                      DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                      Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                      1 Reply Last reply Reply Quote 0
                                      • H Offline
                                        Hass
                                        last edited by

                                        @Derelict it looks like DNS on the .1 (CARP VIP) works on the two OPT networks (GUEST and LAB) but not on the LAN Network. I just get a timed out when I try and lookup against DNS on the LAN CARP VIP

                                        1 Reply Last reply Reply Quote 0
                                        • DerelictD Offline
                                          Derelict LAYER 8 Netgate
                                          last edited by Derelict

                                          Are you passing DNS traffic to the LAN CARP VIP on that interface?

                                          Did you change the default listening interfaces on unbound from All?

                                          Is the source address of the query from an address on a pfSense interface or from a network routed from a downstream router on LAN?

                                          Anything interesting logged in the DNS Resolver logs?

                                          Chattanooga, Tennessee, USA
                                          A comprehensive network diagram is worth 10,000 words and 15 conference calls.
                                          DO NOT set a source address/port in a port forward or firewall rule unless you KNOW you need it!
                                          Do Not Chat For Help! NO_WAN_EGRESS(TM)

                                          1 Reply Last reply Reply Quote 0
                                          • H Offline
                                            Hass
                                            last edited by

                                            Hi Have the interface in DNS Resolver setup with the LAN and LAN CARP VIP highlighted.

                                            If I try and do a packet capture of the firewall on the LAN interface for that LAN CARP VIP, I don't see any traffic for a DNS lookup or even a PING (which works).

                                            FYI< I checked this on both firewalls to be sure.

                                            Hass

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.