Ip Sec
-
Good Morning.
I set up a tunnel for a branch of mine that has pfsense too, but I can not have communication between them.
-
Check your Phase 2 & firewall rules.
I'd be using IKEv2 if you can.
https://docs.netgate.com/pfsense/en/latest/vpn/ipsec/ipsec-troubleshooting.html
-
Just happened to be playing earlier
-
also check Status / System log / IPsec on both pfsense and report eventually.
what does it say ?
i can't see anything wrong from your screenshot, it can be some mismatch on the other side like wrong ip on the remote gateway / wrong peer identifier
and again we don't see a phase2 for the other pfSense
first thing first we need to understand what's not working exactly from the log -
I was off the ip sec service.
I can drip my public ip from the other base, but I can't drip my machine there -
Not sure what you mean.
You may be better posting here:-
https://forum.netgate.com/category/67/pfsense-international-support