Vários Gateways + squid proxy
-
hello, I'm begginer here and need help about one question. My scenario is:
PFSense 2.4.4 with 3 gateways for differente ranges of lan, but when I enable the Squid Proxy Server it disabled my firewall configuration of gateway and setup the gateway default for all ips indepentment of the lan.
How I can to use different gateway without the Squid Proxy Server changed the gateway. -
While you can use the tcp_outgoing_address directive to specify an outbound address for squid to use, I don't believe you can configure it per network. Squid only wants to use one address.
-
I've never tried it but you should be able to specify a different address for each matching ACL. Or for all traffic if you don't specify an ACL which is how I have used it:
http://www.squid-cache.org/Doc/config/tcp_outgoing_address/Steve
-
where do I use the tcp_outgoing_address?
and I have other problem, I use failover and load balance. -
In the Custom Options Before Auth field in the Squid general settings.
You can only specify an IP there, you can't use a gateway group.
If you need Squid to use a gateway group you can leave it as default where it will use the system default route and then set that as gateway group in System > Routing.
Steve
