No LAN internet...
-
And what is the network on your LAN side, pfsense default to 192.168.1 as well - so yeah that wouldn't work.
-
Network on the lan side of pfSense box is set to 192.168.1.2....the modem usually pulls an IP like 10.XXX.XXX.XXX and passes it to pfSense....
-
So your pfsense wan gets a 10.x.x.x/? address.. And from the wan of pfsense you can ping say 8.8.8.8?
And lan side of pfsense is 192.168.1.1/24 - that is its address. Not sure why you would of changed your pfsense to 192.168.1.2?
So you set this lan device to 192.168.1.2/24 and it can ping pfsense lan IP 192.168.1.1? Which is also set as this devices gateway.. Are you setting this device IP static, or you letting it get dhcp from pfsense? But your saying it can not ping 8.8.8.8?
Did you dick with outbound nat, did you setup some vpn? Or is dns just not working?
Your on some sort of cell connection? I guess its possible that they are messing with resolving of dns - which is what pfsense does out of the box. Can pfsense resolve stuff?
-
This is a new install....dicked with nothing but setting a fixed IP for accessing the GUI. No settings changed. And yes cellular connection....I'm lost on your reference to pinging pfsense lan IP 192.168.1.1? It doesn't matter if my laptop gets a DHCP lease from pfsense or I set it static, I cannot get connectivity past the pfsense box. I can get to the gui but cannot get the modem or internet.
-
Well does pfsense have internet access? You can get to the gui, so do the ping test I showed. Hard for the clients behind pfsense to get to internet if pfsense can not.
-
Will try now.....have to go reset the modem and hook it all up. Like I said this is my only connection....lol. I will reply back in a while! Thanks!
-
And yes pfsense has access. I can ping anything when its all set up but only from the gui....
-
Ok, well no problem pinging 8.8.8.8 or resolving addresses from the gui. Just no internet to any machine connected to pfsense....removed all firewall rules from WAN just to check. Still nope.
-
Turned off all NAT and Firewall rules in advanced settings, still no internet so this must be an addressing issue but I'm lost now.
-
Seems likely you have 192.168.1.0/24 on both sides of the SG-1000 somehow.
the modem is set to 192.168.1.1
What exactly is set to 192.168.1.1? What is the pfSense LAN IP set to?
Steve
-
@mebelowsea said in No LAN internet...:
Turned off all NAT and Firewall rules in advanced settings,
And why would you think that could of possibly worked??
You can not have the same networks on your wan and lan... Pfsense wan is what? What is the lan.. show via your interface status..
example
You didn't remove the default lan rules did you?
-
Ooops, missed that! Yeah if you disable pf in the advanced settings that disables NAT and you need outbound NAT for any connection to work from the internal private subnet.
Steve
