Host name help
-
@Hammer8 said in Host name help:
type in the name of the host in Explorer to access that host’s shares vs. typing in the IP address
On a windows network, as long as its the same L2 network windows will broadcast for the hostname and the host if on will see its name in the broadcast and answer hey I am here at this IP. Unless you have modified windows default behavior..
The cleaner way to do it is use the fqdn, ie host.domain.tld vs just host.. This will do a dns query for that name - so then dns will resolve. If you setup a dhcp reservation so that device always gets the same IP, you can just have unbound register the fqdn.. So when asking dns for host.domain.tld it will resolve to the IP.
If you want to just use hostname, as long as your box your wanting to query the host name from has proper search suffix enabled it will auto do a query for the fqdn..
But no dns will not respond to just a host name query without it being fully qualified.
-
But it will append the domain given to it via DHCP which will be the firewall domain specified in General Setup unless you've specified something different in the DHCP server config.
Steve
-
Hmm...thank you all, but I’m not sure what I need to do. For example, I have a Windows 10 PC called Piano which has a static ip of 192.168.1.33
I can access its shares by typing //192.168.1.33 in explorer. I would like to access the shares by typing in //Piano instead. I see under Diag/ARP table in pfsense that the hosts which get their ip’s via DHCP has the host name populated, but for those which I assign static IP’s, the host name field is blank.
Thank you.
-
Exactly, so add them as static IP reservations in the DHCP server setup even if they don't actually pull an IP via DHCP.
Then in the DNS resolved make sure you have
Register DHCP static mappings in the DNS Resolverenabled.Steve
-
Assign the machine a static via the dhcp server, ie a reservation..
For example I have a windows 10 machine name i5-win, yes very creative since it a I5 cpu running windows ;)
So via dhcp it will always get that 192.168.9.100 IP, since my domain in pfsense is set to local.lan - the fqdn for this host will be i5-win.local.lan
Since I have unbound set to register dhcp reservations in dns, I will be able to resolve that via the fqdn.. Since windows will auto add the domain to a query.. I can do just query for the host name and get back the fqdn
> i5-win Server: sg4860.local.lan Address: 192.168.9.253 Name: i5-win.local.lan Address: 192.168.9.100ping of just host, any box that uses a search suffix for the domain your using will return the fqdn and IP
root@uc:/tmp# ping i5-win PING i5-win.local.lan (192.168.9.100) 56(84) bytes of data. 64 bytes from i5-win.local.lan (192.168.9.100): icmp_seq=1 ttl=127 time=0.748 ms 64 bytes from i5-win.local.lan (192.168.9.100): icmp_seq=2 ttl=127 time=0.728 ms 64 bytes from i5-win.local.lan (192.168.9.100): icmp_seq=3 ttl=127 time=0.632 ms -
Thank you! That did the trick. Appreciate everyone’s help. Out of curiosity, why is it under pfsense, I need to specify a MAC address and with my Netgear router, I didn’t have to? Not a big deal, but will need to change the entry in Pfsense if my hardware changes.
-
@Hammer8 said in Host name help:
Hmm...thank you all, but I’m not sure what I need to do.
If the computer is connected to the network, it should have an address. You can go into the Status > DHCP Leases to find that address. You can then click on the "+", 2nd from right, to add a static mapping. You then set the address you want and give it a host name. When you have done this, the device will have a static address and a host name that you can use.
-
It's not actually using the MAC address there. Entering it as a static lease is a convenient way of getting the hostname/IP address into the DNS resolver. You could also add those as host overrides in the DNS resolver directly and it would have the same effect.
Adding it as a static lease means you don't accidentally assign the IP to another device as it's already in table. It also means if that device changes from static to DHCP for some reason it will pull the same IP address.Steve
-
I your client would of been dhcp already, you wouldn't of had to call out the mac - since pfsense would of already known it and you could just clicked the little add button.. in the lease table and put in the IP you wanted the client to use (outside of the dhcp scope)
-
@stephenw10 said in Host name help:
It's not actually using the MAC address there. Entering it as a static lease is a convenient way of getting the hostname/IP address into the DNS resolver. You could also add those as host overrides in the DNS resolver directly and it would have the same effect.
Adding it as a static lease means you don't accidentally assign the IP to another device as it's already in table. It also means if that device changes from static to DHCP for some reason it will pull the same IP address.Steve
Hi, I deleted the entries I entered previously under DHCP Static Mappings and re-entered them as host overrides under DNS resolver and it doesn't seem to work. Eg., I can't access the shares as \Piano in Windows explorer. These machines are all part of a WORKGROUP and not part of a DOMAIN so under domain, I entered "local". Is there anything else I need to do? Thank you!
-
It has to match whatever they were showing up as in the dhcp leases. I expect that to be whatever the pfSense domain is unless you set something specifically in the dhcp server.
Is there some reason you don't want to use dhcp static lease entries for this?Steve
-
Your machine will use a domain to resolve dns.. workgroups have nothing to do with it..
In your pfsense what does it say for the domain, see my post above.
On your client what does it say.. do an ipconfig /all
$ ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : i5-win Primary Dns Suffix . . . . . . . : local.lan Node Type . . . . . . . . . . . . : Broadcast IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : local.lanSee the local.lan as the primary domain suffix, and the search list..
If you setup a host override for piano.local - then that is what you would have to do a specific dns query for.
-
@stephenw10 said in Host name help:
It has to match whatever they were showing up as in the dhcp leases. I expect that to be whatever the pfSense domain is unless you set something specifically in the dhcp server.
Is there some reason you don't want to use dhcp static lease entries for this?Steve
Yes, I remote access into these machines and so need a static IP. When you say it has to match the dhcp leases, how can I find what that is? When I go to view the dhcp leases, these machines don't show up...I thought is was because they are set up as static IP's. Note I set these up with static ip's within Windows.
-
What does remote access have to do with anything?? When you set a dhcp reservation - that machine will always get that IP.
You can set them up on your machine directly if you want - lot of extra work for nothing.. But your host override will work as well as long as your fqdn (fully qualified domain name) is correct and that is what you query for.
Here..
$ ping piano.local Pinging piano.local [192.168.9.10] with 32 bytes of data: Reply from 192.168.9.10: bytes=32 time<1ms TTL=64 Reply from 192.168.9.10: bytes=32 time<1ms TTL=64 Reply from 192.168.9.10: bytes=32 time<1ms TTL=64
-
@johnpoz said in Host name help:
But your host override will work as well as long as your fqdn (fully qualified domain name) is correct and that is what you query for.
As I mentioned above, it's very easy to just get a DHCP address, find it in the DHCP leases and change it to a static mapping and provide a host name, all on the same page. Otherwise, you have to determine the MAC address and then configure the mapping.
-
Thanks. I get it now. Don't specify the static ip on the pc. Set it to use DHCP and then in pfsense, make it a static ip on the DHCP leases page. Works great! Thank you.
