[SOLVED] OpenVPN for Guest Interface
-
What do I select in destination, can't find openvpn in there.
-
Still don't have a clue on what you exactly want.
Also why would you put a rule on the LAN interface rather than the OpenVPN interface if you want to block what the OpenVPN net has access to.
-
Oh, I have OpenVPN Client setup on PfSense, But I only to apply that openvpn client to apply my guest interface only, Instead of being applied to the entire network. I dont want to have vpn on my LAN, just on Guest.
-
So you want the Guest network to route out over the OpenVPN connection?
-
Yes, Only guest Network.
-
You just need to change the gateway on the outbound traffic.
Look at policy based routing, outbound NAT & also look at VPN killswitch.
-
What is destination, ipv4_local
-
Thats my local subnets, basically block everything to my local subnets then allow anything that isn't my local subnets and set the gateway to use NordVPN.
-
ok got it, let me try
-
Can't find gateway option,
-
Need to edit the pass rule on your guest interface that passes the traffic and look in the advanced section.
-
Sorry, I am confused, this how the setting are,
-
-
Thanks
