Can't find new Nic installed "Intel Pro/1000 MT Desktop Adapter"
-
The Intel Pro 1000 MT should work fine with pfSense. The driver is already built in.
Maybe it's not installed properly into the main board or it's not compatible with the PCI slot?
If it is, pfSense should find the hardware.Run dmesg to check if the NICs are found by the kernel. You should find lines beginning with em0, em1. I assume your onboard NICs are other types.
-
@viragomann actually i run some command that will list all my nic, and it show but it mark as "none:"
my builtin nic mark as "re0:" -
Also the hardware was intalled properly because when i plugged in the cable, the lan card was blinking..
-
Does it show up as a choice when you go to Interfaces, Assign?
-
@dotdash It doesn't show. I already add a line to
/boot/loader.conf
hint.agp.0.disabled=1but still didn't resolved my problem.
it show something like this (cant give you right now the exact because im not in my machine)
none1@pci0:6:0:0: class=0x020000 card=0x109a15d9 chip=0x109a8086 rev=0x00 hdr=0x00
vendor = 'Intel Corporation'
device = '82573L Gigabit Ethernet Controller'
class = networkIt was mark as none1
-
That's strange. "none" means that the driver is not loaded. However, the chip is recognized correctly and the em driver is included in FreeBSD for many years.
Probably you can load it manually by adding
if_em_load="YES"to the /boot/loader.conf.local
-
@viragomann Thank you, I will try this later,
EDIT: i dont have /boot/loader.conf.local
i only see.. /boot/loader.confare they are boot different?
-
Create the file.
The loader.conf gets overwritten on reboot.
-
@viragomann ok will try this..
I will try to create loader.conf.local in boot directory and will put this:
hint.agp.0.disabled=1 if_em_load="YES" -
Sorry, i don't know how to create the file loader.conf.local.. But i notice when i run this commad: dmesg
i got this:highlight:
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> at device 1.0 on pci3 em0: Setup of Shared code failed device_attach: em0 attach returned 6Full Log
Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019 root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.81-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8120471552 (7744 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1596403800 Hz quality 1000 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1 random: entropy device external interface ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x4 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c18000-0xf7c183ff irq 23 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c8:60:00:e1:57:82 re0: netmap queues/slots: TX 1/256, RX 1/256 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> at device 1.0 on pci3 em0: Setup of Shared code failed device_attach: em0 attach returned 6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0 pcm1: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 ugen2.1: <Intel EHCI root HUB> at usbus2 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: 8 ports with 8 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: <SIGMACHIP USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0 kbd2 at ukbd0 uhid0 on uhub1 uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen0.3: <A4Tech USB Mouse> at usbus0 uhub3: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1BD142 KC45> ATA8-ACS SATA 3.x device ada0: Serial Number S2A6V1Q6 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada0: quirks=0x1<4K> Trying to mount root from ufs:/dev/ufsid/5db11466fd0b9148 [rw]... random: unblocking device. CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.81-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics re0: link state changed to DOWN vlan0: changing name to 're0.10' re0: link state changed to UP re0.10: link state changed to UP pflog0: promiscuous mode enabled pflog0: promiscuous mode disabled Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `bufdaemon' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 3 1 0 0 done All buffers synced. Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.2-RELEASE-p10 #9 4a2bfdce133(RELENG_2_4_4): Wed May 15 18:54:42 EDT 2019 root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-244/obj/amd64/ZfGpH5cd/build/ce-crossbuild-244/pfSense/tmp/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 8120471552 (7744 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <ALASKA A M I> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! SMP: AP CPU #1 Launched! Timecounter "TSC-low" frequency 1596407742 Hz quality 1000 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff80681430, 0) error 1 random: entropy device external interface ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806814e0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff80681590, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806a8460, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806a8510, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806a85c0, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff8120aaa0, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <ALASKA A M I> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x4 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf7c00000-0xf7c0ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) ehci0: <Intel Panther Point USB 2.0 controller> mem 0xf7c18000-0xf7c183ff irq 23 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 hdac0: <Intel Panther Point HDA Controller> mem 0xf7c10000-0xf7c13fff irq 22 at device 27.0 on pci0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pcib2: [GIANT-LOCKED] pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0 pci2: <ACPI PCI bus> on pcib3 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xe000-0xe0ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at device 0.0 on pci2 re0: Using 1 MSI-X message re0: Chip rev. 0x48000000 re0: MAC rev. 0x00000000 miibus0: <MII bus> on re0 rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow re0: Using defaults for TSO: 65518/35/2048 re0: Ethernet address: c8:60:00:e1:57:82 re0: netmap queues/slots: TX 1/256, RX 1/256 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xf7c17000-0xf7c173ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci3: <ACPI PCI bus> on pcib4 em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> at device 1.0 on pci3 em0: Setup of Shared code failed device_attach: em0 attach returned 6 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Panther Point AHCI SATA controller> port 0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xf7c16000-0xf7c167ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 ppc1: <Parallel port> port 0x378-0x37f irq 5 on acpi0 ppc1: Generic chipset (NIBBLE-only) in COMPATIBLE mode ppbus0: <Parallel port bus> on ppc1 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec hdacc0: <VIA VT1708S_0 HDA CODEC> at cad 0 on hdac0 hdaa0: <VIA VT1708S_0 Audio Function Group> at nid 1 on hdacc0 pcm0: <VIA VT1708S_0 (Analog 2.0+HP/2.0)> at nid 28,29 and 26,30,27 on hdaa0 pcm1: <VIA VT1708S_0 (Digital)> at nid 32 on hdaa0 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 7 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub1: 8 ports with 8 removable, self powered uhub2: 2 ports with 2 removable, self powered uhub0: 2 ports with 2 removable, self powered ugen0.2: <SIGMACHIP USB Keyboard> at usbus0 ukbd0 on uhub1 ukbd0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0 kbd2 at ukbd0 uhid0 on uhub1 uhid0: <SIGMACHIP USB Keyboard, class 0/0, rev 1.10/1.10, addr 1> on usbus0 ugen1.2: <vendor 0x8087 product 0x0024> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x0024> at usbus2 uhub4 on uhub2 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2 ugen0.3: <A4Tech USB Mouse> at usbus0 uhub3: 6 ports with 6 removable, self powered uhub4: 6 ports with 6 removable, self powered ses0 at ahciem0 bus 0 scbus1 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device ses0: SEMB SES Device ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <ST500DM002-1BD142 KC45> ATA8-ACS SATA 3.x device ada0: Serial Number S2A6V1Q6 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 476940MB (976773168 512 byte sectors) ada0: quirks=0x1<4K> Trying to mount root from ufs:/dev/ufsid/5db11466fd0b9148 [rw]... random: unblocking device. CPU: Intel(R) Core(TM) i5-3470 CPU @ 3.20GHz (3192.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306a9 Family=0x6 Model=0x3a Stepping=9 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF> Structured Extended Features=0x281<FSGSBASE,SMEP,ERMS> Structured Extended Features3=0x9c000400<IBPB,STIBP,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics re0: link state changed to DOWN re0: link state changed to UP pflog0: promiscuous mode enabled arpresolve: can't allocate llinfo for 192.168.1.1 on re0 padlock0: No ACE support. aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard coretemp0: <CPU On-Die Thermal Sensors> on cpu0 coretemp1: <CPU On-Die Thermal Sensors> on cpu1 coretemp2: <CPU On-Die Thermal Sensors> on cpu2 coretemp3: <CPU On-Die Thermal Sensors> on cpu3 -
upgrade the bios of the motherboard, check if there is some options like disable PnP aware OS in your BIOS or anything related
-
Yeah. To update the BIOS is a very good advice when having hardware issues.
@Larz1112 said in Can't find new Nic installed "Intel Pro/1000 MT Desktop Adapter":
i don't know how to create the file loader.conf.local..
echo "hint.acpi.0.disabled=\"1\"" >> /boot/loader.conf.local echo "if_em_load=\"YES\"" >> /boot/loader.conf.loc@Larz1112 said in Can't find new Nic installed "Intel Pro/1000 MT Desktop Adapter":
But i notice when i run this commad: dmesg
i got this:highlight:
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.1.0> at device 1.0 on pci3 em0: Setup of Shared code failed device_attach: em0 attach returned 6This usually indicates that the OS has not full control over the hardware cause of BIOS obstructions.
-
@kiokoman said in Can't find new Nic installed "Intel Pro/1000 MT Desktop Adapter":
PnP aware OS
There is no pnp aware os in my bios.
-
@viragomann said in Can't find new Nic installed "Intel Pro/1000 MT Desktop Adapter":
I assume this typo error "echo "if_em_load="YES"" >> /boot/loader.conf.loc" instead i type local.
but then my pfsense stop from booting..
and show error:atpic requres a local apic -
Can you try a different slot location for the card? It may be a resource conflict.
-
@chpalmer ok i will try it now..
-
Solve, thanks @chpalmer , just tried in the other slot.. and it works!
-
-
Thanks everybody for helping me..
You saved me @chpalmer .. :cheers: -
I'm having this same issue with the Intel PRO/1000 MT Desktop Adapter .. never had an issue with these nics in our DC's before ... I've also tried different PCI ports to no avail UPDATE: it seemed as if my NIC card was completely dead. nothing to do with pfsense
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.