MPLS Load balance & FailOver
-
We have three location, all location have pfSense firewall installed. These location are connected through MPLS but in case of MPLS failed at one of location that site get disconnected so we bought MPLS from other vendor that means we have now two MPLS provider but we are not able to load balance or failover on both MPLS. pls. help
-
How to configure frr ospf in pfsense, pls. guide
-
no reply from anyone
-
So you have access to both other locations via the MPLS network at all three locations and on both MPLS links?
What have you tried? What didn't work?
This example but without the OpenVPN could probably be expanded to 3 sites:
https://docs.netgate.com/pfsense/en/latest/book/openvpn/openvpn-and-multi-wan.html#openvpn-multi-wan-ospfAlso you should use FRR currently.
Steve
-
Currently we have added static route to each location to access other site through single vendor if that vendor connectivity breaks we have manually shift to other vendor
Both vendor provided MPLS through cloud if site1 location mpls fails for vendor1 but it working on site2 due to this I have to manually shift to other vendor2 even if that site MPLS link is working
I tried OSPF free but it is not showing any neighbors router