DDNS IPv6 Cloudflare

JKnott

That's why I said to ensure it's set. Prior to that setting being available, all it took for my prefix to change is just disconnect/reconnect the WAN Ethernet cable.

What setting are you referring to re DUID? I have never had to set anything like that.

Bob.Dig

@JKnott I was talking about
ServicesDHCPv6 Server & RALANDHCPv6 Server

Finally got it working, I had to use those IPv6s, which the PCs made up by themselves and not the ones from the DHCPv6 Server.

Now the hostnames defined in the DHCP & DHCPv6 Server are automatically in DNS (unbound) and I can have the same Firewall-alias for IPv4 & v6.
This also means, next time (?) the prefix changes, there is nothing to do in pfSense anymore, I only have to update my DNS-Provider.

For that, I still don't have a solution, but I made up a "Dynamic DNS Client" with Cloudflare (v6) in pfSense for the LAN interface, then disabled this client. But those disabled Clients will still be checked by pfSense it seems, so I will see something red in the pfSense Dashboard, next time the prefix changes.

Bob.Dig

That was to quick, it is not possible to have the same Firewall alias (FQDN or hostname) for IPv4 & v6, is this a bug?

JKnott

@Bob-Dig

Where are you referring to? It is certainly possible to have the same hostname for both A & AAAA records. It is not possible to have the same name for an AAAA record and an IPv4 alias with my public DNS server. It is possible to configure that, but the IPv6 AAAA record will never be used.

Bob.Dig

@JKnott
@johnpoz

It seems to be a bug in pfSense.
In the screenshot you can see that I should be able to input a host or FQDN for IPv4 and v6, but pfSense is always puting a /32 behind it, so it is not possible for IPv6 right now. It will only allow /128 with a real IPv6 address.

I am getting nuts, please someone answer.

johnpoz

Can you not read??? Right above where you trying to put in what your putting in???

What does it say about host names and the /32

Bob.Dig

@johnpoz I can read and it says I can input a hostname or FQDN for IPv6, but it doens't do it, always getting back to /32...
It is also not working under Alias/host but here (Alias/networks) the problem is more visible.

johnpoz

What do you think is going to get put in there if you put in a fqdn??? What fqdn are you going to put in??

Bob.Dig

@johnpoz I tried hostnames from the dhcp servers, tried with DNS, tried host with parent domain...

I want a Firewall-Alias which comes from the dns-resolver, or something I can work with, is this possible?

e.g.

johnpoz

Dude how hard is it show what you want? hostU2 is not going to freaking resolve to anything - how and the F do you think that could work?

Bob.Dig

@johnpoz It is working for IPv4! Why not for v6.

johnpoz

What is in your alias???????? hostu2 is not a FQDN..

Bob.Dig

@johnpoz For IPv4 e.g.

and works, tried it right now with a friend.

johnpoz

And what does pfsense resolve that too??? It would be using its own search suffix?

What is in the table? Go to hostname and resolve u2.. What does it come back with..

Bob.Dig

@johnpoz Where should I look exactly? The firewall tab can't show it.

Bob.Dig

@johnpoz When I go to Diag/table it will only say 192.168.1.30
But why? Why can't I input the same for IPv6 there.

johnpoz

And where do you think it gets that from?? U2 is not a FQDN it can not resolve... you have it in your host file on pfsense.. or you append the domain to it when you query it...

Do you have IPv6 there... I can resolve any fqdn I want for ipv6...

Bob.Dig

@johnpoz So who put the 192.168.1.30 in that table? Where originated it? Why can't I do the same thing for IPv6?

johnpoz

Here

there is no ipv4 for pfsense, but there is a pfsense.local.lan IPv6 entry in my resolver host override... So when I tell ping to ping that host via ipv6 it gets the IPv6 address..

Bob.Dig

@johnpoz So my question is this, it is working for IPv4, tested it.
FQDN also works.

Why is it not working for IPv6?