Unable to access pfsense via serial cable

JKnott

Is that cable compatible with whatever hardware you're using? For example, Cisco cables are different from Adtran. What does the RJ45 end connect to? Find out what the pin out is on that cable and short the Tx & Rx lines. You should then be able to use a terminal emulator app, such as Putty and see the characters echoed back.

Gertjan

@smrehan00 said in Unable to access pfsense via serial cable:

a console port (USB to RJ-45)

So it another NIC ?
Shouldn't this be something like USB to RJ-45 to RS232 ?
Like : internally (in the pfSense) device there is some UART, and its interface is ported to an (micro) USB on the outside of the box.
To be used with an USB cable that exposes itself to your PC as a COM port (over USB) - the micro USB on the other side connects to your RS-232 port, which physicality is micro USB port.

To make it short : what is this RJ-45 plug on your cable ?

JKnott

@Gertjan

That cable is likely a Cisco console cable. However, without knowing what he's plugging into, it's impossible to say if it's the right cable. There are differences in console cables. I've seen at least 3 different configurations in my work. Hopefully, he's not trying to plug it into an Ethernet port.

smrehan00

@JKnott
@Gertjan

Hi Guys! Thank you for responding back. Well, I am not an idiot :) and I know where to put the console cable in the console port.

mnho-073 console.JPG

The USB end goes into the USB port on my laptop and the rj-45 end goes into the console port.
Can you tell me how to short the Tx and Rx lines?
Can you share the color code for the wires required for it to work? In case the color code is not correct in my cable. I'll post the actual cable color code tomorrow as the cable is in the office and I am at home.

Unfortunately, manufactures don't offer Rs-232 port anymore so I am stuck with the RJ-45 based console port.
Here is the link to the serial cable which I got:

https://www.daraz.pk/products/usb-to-rj45-for-cisco-usb-console-cable-ftdi-744664241835-i126626956-s1285112387.html?spm=a2a0e.searchlist.list.1.109060eaanGv2O&search=1

JKnott

@smrehan00

Here's the Cisco pin out, which likely matches your adapter. There is no standard colour code I'm aware of as different manufacturers do what they want. However, it's pins 3 & 6 that have to be connected. The easiest way to do that is with an Ethernet jack. However, those will generally need a punch tool, though some come with their own tool. You might also find some with screw terminals. If you're handy with soldering, you could make your own, with a circuit board mount connector, with which you'd then solder a jumper between 3 & 6.

jahonix

@smrehan00 said in Unable to access pfsense via serial cable:

don't offer Rs-232 port anymore so I am stuck with the RJ-45 based console port.

What?
That IS a serial RS-232 port just not on a DB-9 but an RJ-45 connector. Problem is that the pin-out of the RJ-45 is not standardised. Katron/KTI networks uses the same serial on RJ45 but with reversed RX/TX lines as compared to Cisco. That's an adaptor-mess unless you built your own cable.

Ask the board manufacturer for the RJ-45 pin-out, maybe that's even printed in the manual.

JKnott

@jahonix said in Unable to access pfsense via serial cable:

DB-9

Actually, that should be DE-9. DB-9 is used by those who don't know any better. The "D" refers to connector type, the 2nd letter the shell size and the number refers to the number of pins. So, the old 25 pin serial connectors are DB-25 and the 9 pin, DE-9.

D-subminiature

BTW, at one point in my career, I used to order connectors by the hundreds. I wouldn't get very far ordering the wrong item.

Derelict

@JKnott said in Unable to access pfsense via serial cable:

What does the RJ45 end connect to?

We could also argue that it is not an RJ45, but an 8P8C connector/jack.

smrehan00

@Derelict
@JKnott
@Gertjan
@jahonix

Guys do any of you have a working console cable? If yes then can you post a picture of it ? Moreover, can you post an up close zoomed in on the pin layout of the Rj-45 connector? So, I can take notes and create a new connector?

Derelict

It depends on how the port in your device is configured. You will need the documentation for that before anyone can help you.

provels

Beyond cable incompatibility, I'd probably try 9600 and 19200 baud as well. Then again, I might just SSH over IP and call it a day.

JKnott

@smrehan00

I have a few for Cisco, but they are DE-9 on one end, not USB. Regardless, a picture won't tell you anything. I have used cables for Cisco, Adtran and Ciena and they weren't compatible. You need to find out the connections required for your device and compare it with the Cisco pin out I provided.

JKnott

@Derelict said in Unable to access pfsense via serial cable:

We could also argue that it is not an RJ45, but an 8P8C connector/jack

RJ45 is valid, as it refers to a registered jack type. 8P8C is the connector used with it. On the other hand, DB-9 doesn't exist, at least not in the commonly used connectors.

smrehan00

@JKnott

This is the cable pin out that I have on the cable I bought.

jahonix

These colors are not standardised so from viewing at it we know nothing.
You must provide the pins of the RJ-45 jack from your device.

jahonix

@JKnott said in Unable to access pfsense via serial cable:

Actually, that should be ...

And what does it help with the actual problem if it's DB or DE? We are not a micron closer to a solution.

Gertjan

This https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K/ref=sr_1_1?keywords=Moyina&qid=1578056697&sr=8-1 is the cable ( I guess - it's the same image).
Pin layout is present.

Couldn't find any details about the RS-232 (RJ-45 like) plug :

@smrehan00 : your turn.

JKnott

@smrehan00 said in Unable to access pfsense via serial cable:

This is the cable pin out that I have on the cable I bought.

As has been said several times, there is no standard connection. I mentioned 3 brands of equipment, which all use different configurations. For us to help you, you have to provide the connections as required by your device. We simply don't know. Is there not any documentation for that computer that tells you what's required?

smrehan00

@JKnott There is nothing in the manual which shows about the pin status of console port. I will check in the system bios to see if the console port is activated via BIOS.

Gertjan

?? You actually bought a device with very needed peripherals that are not documented (and probably not standard) .... it's time to contact their support.
Was the device sold with an optional console cable ? Your next best choice : get this cable.