Transit vlan between pfsense and Netgear m4300 L3 switch
-
Pfsense Lan default gateway is 192.168.10.246 and I have created a gateway for the transit vlan 192.168.10.1 and static routes for the vlans on pfsense. I have also widened the firewall rules under the lan interface to any any rather than any lan net.
I have changed the management vlan to 10 with ip 192.168.10.1 with default gateway of 192.168.10.246. I have created a default route on the switch of 192.168.10.246 255.255.255.0 and this works. I can ping all the vlans and access the Internet from them all.
But I think I am using the management vlan as the transit and would like to have the transit and management vlans separate.
I then created vlan 15 and set that as my management vlan ip 192.168.15.2 with default gateway 192.168.15.1 but it will not allow me to set the gateway to 192.168.15.1 and defaults to 0.0.0.0. It also sets the default route to 192.168. 15.1 rather than 192.168.10.246. I was going to create a routed port on the switch for the transit with ip 192.168.10.1. I just don't seem to be able to create a separate transit vlan. Should I just go with the config that works or try and separate out the management and transit vlans.
Does anyone know how to do this with the netgear switches and pfsense?