crash report help

achillingsight

Hello folks,
I'm looking into some assistance as to why my pfSense keeps crashing. It's appears to be random, any advice/feedback is appreciated. It is an older system, aside from the 4 port NIC, just bought that so I wouldn't be surprised if it turns out to be the ram or something like that.

Thanks

textdump.tar.0

kiokoman

yeah my 2 cent is on bad ram, check with memtest
if it is so old I would also check if there are some inflated capacitors

stephenw10

Relevant part of ther crash log is:

db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0xc26380
curthread    = 0xfffff80004d22000: pid 0 "bge0 taskq"
curpcb       = 0xfffffe011a584cc0
fpcurthread  = none
idlethread   = 0xfffff8000495c000: tid 100003 "idle: cpu0"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb6810
commontssp   = 0xffffffff82bb6810
rsp0         = 0xfffffe011a584cc0
gs32p        = 0xffffffff82bbd068
ldt          = 0xffffffff82bbd0a8
tss          = 0xffffffff82bbd098
db:0:kdb.enter.default>  bt
Tracing pid 0 tid 100079 td 0xfffff80004d22000
kdb_enter() at kdb_enter+0x3b/frame 0xffffffff82b0e840
vpanic() at vpanic+0x194/frame 0xffffffff82b0e8a0
panic() at panic+0x43/frame 0xffffffff82b0e900
dblfault_handler() at dblfault_handler+0x1de/frame 0xffffffff82b0e9d0
Xdblfault() at Xdblfault+0xba/frame 0xffffffff82b0e9d0
--- trap 0x17, rip = 0xffffffff8051823e, rsp = 0xf958e0fffff8007f, rbp = 0xfffffe011a584b20 ---
bge_intr_task() at bge_intr_task+0x13e/frame 0xfffffe011a584b20
taskqueue_run_locked() at taskqueue_run_locked+0x154/frame 0xfffffe011a584b80
taskqueue_thread_loop() at taskqueue_thread_loop+0x98/frame 0xfffffe011a584bb0
fork_exit() at fork_exit+0x83/frame 0xfffffe011a584bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe011a584bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
db:0:kdb.enter.default>  ps

So something with a bge interrupt or very near it. Double fault can be hard to pin down though.

If this the first time you have seen in crash? Does it appear to be the same crash?

Can you disable or remove the bge NIC as a test?

Steve

achillingsight

Thanks for the replies. I've ordered new ram just to eliminate that being an issue.

I have 2 other crash logs

Here's the first (happened about 6 days after OP):

db:0:kdb.enter.default>  show pcpu
cpuid        = 1
dynamic pcpu = 0xfffffe0193727380
curthread    = 0xfffff80016510620: pid 58027 "unbound-control"
curpcb       = 0xfffffe011d3c0cc0
fpcurthread  = 0xfffff80016510620: pid 58027 "unbound-control"
idlethread   = 0xfffff8000495b620: tid 100004 "idle: cpu1"
curpmap      = 0xffffffff82b85998
tssp         = 0xffffffff82bb6878
commontssp   = 0xffffffff82bb6878
rsp0         = 0xfffffe011d3c0cc0
gs32p        = 0xffffffff82bbd0d0
ldt          = 0xffffffff82bbd110
tss          = 0xffffffff82bbd100
db:0:kdb.enter.default>  bt
Tracing pid 58027 tid 100435 td 0xfffff80016510620
vm_object_terminate() at vm_object_terminate+0x332/frame 0xfffffe011d3c0950
vm_object_deallocate() at vm_object_deallocate+0x28/frame 0xfffffe011d3c09b0
_vm_map_unlock() at _vm_map_unlock+0xd9/frame 0xfffffe011d3c09d0
vm_map_remove() at vm_map_remove+0xb2/frame 0xfffffe011d3c0a00
vmspace_exit() at vmspace_exit+0xc9/frame 0xfffffe011d3c0a40
exit1() at exit1+0x5c9/frame 0xfffffe011d3c0ab0
sys_sys_exit() at sys_sys_exit+0xd/frame 0xfffffe011d3c0ac0
amd64_syscall() at amd64_syscall+0xa38/frame 0xfffffe011d3c0bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe011d3c0bf0
--- syscall (1, FreeBSD ELF64, sys_sys_exit), rip = 0x801b7c32a, rsp = 0x7fffffffec38, rbp = 0x7fffffffec50 ---

Here's the other (1 day after the one above) - this also has a panic.txt (vm_fault: fault on nofault entry, addr: fffffe00de340000):

db:0:kdb.enter.default>  show pcpu
cpuid        = 0
dynamic pcpu = 0xc26380
curthread    = 0xfffff801285ce000: pid 15614 "unbound-control"
curpcb       = 0xfffffe011d508cc0
fpcurthread  = 0xfffff801285ce000: pid 15614 "unbound-control"
idlethread   = 0xfffff8000495c000: tid 100003 "idle: cpu0"
curpmap      = 0xfffff80128614138
tssp         = 0xffffffff82bb6810
commontssp   = 0xffffffff82bb6810
rsp0         = 0xfffffe011d508cc0
gs32p        = 0xffffffff82bbd068
ldt          = 0xffffffff82bbd0a8
tss          = 0xffffffff82bbd098
db:0:kdb.enter.default>  bt
Tracing pid 15614 tid 100505 td 0xfffff801285ce000
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe011d508140
vpanic() at vpanic+0x194/frame 0xfffffe011d5081a0
panic() at panic+0x43/frame 0xfffffe011d508200
vm_fault_hold() at vm_fault_hold+0x244a/frame 0xfffffe011d508330
vm_fault() at vm_fault+0x75/frame 0xfffffe011d508370
trap_pfault() at trap_pfault+0x14c/frame 0xfffffe011d5083d0
trap() at trap+0x2c7/frame 0xfffffe011d5084e0
calltrap() at calltrap+0x8/frame 0xfffffe011d5084e0
--- trap 0xc, rip = 0xffffffff830cd41f, rsp = 0xfffffe011d5085b0, rbp = 0xfffffe011d5085f0 ---
zfs_freebsd_access() at zfs_freebsd_access+0x1f/frame 0xfffffe011d5085f0
VOP_ACCESS_APV() at VOP_ACCESS_APV+0x7c/frame 0xfffffe011d508620
vfs_cache_lookup() at vfs_cache_lookup+0x91/frame 0xfffffe011d508680
VOP_LOOKUP_APV() at VOP_LOOKUP_APV+0x7c/frame 0xfffffe011d5086b0
lookup() at lookup+0x6a1/frame 0xfffffe011d508740
namei() at namei+0x489/frame 0xfffffe011d508810
vn_open_cred() at vn_open_cred+0x231/frame 0xfffffe011d508950
kern_openat() at kern_openat+0x20c/frame 0xfffffe011d508ac0
amd64_syscall() at amd64_syscall+0xa38/frame 0xfffffe011d508bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe011d508bf0
--- syscall (5, FreeBSD ELF64, sys_open), rip = 0x801be12aa, rsp = 0x7fffffffdd88, rbp = 0x7fffffffddc0 ---

stephenw10

Those look more like ram errors. They are completely different the earlier crash.