[Solved] No web access in LAN
-
so this is just normal outbound access.
-
Yes, but it isn't working.
Here is are the Outbound Settings I have, they are preconfigured by pfsense. Is there anything else I have to configure to make it working correctly?
-
Other than horrible Idea to use a /16 for your internal networks - really have you have some 65K IPs on this network?
If your internal is being natted to your wan IP... There is nothing pfsense can do about not getting an answer..
Sniff on your wan when you try and ping say 8.8.8.8 do you see traffic go out to your wan gateway natted to your wan IP? if you get no response that has nothing to do with pfsense.
What is in front of pfsense? Does pfsense have rfc1918 on its wan or public?
-
Yeah the /16 is not optimal, I'm gonna change that in the future.
The strange thing is that I am able to ping all addresses from inside the LAN, but nothing more.
In front of the pfsense is a public address. I am able to curl websites from the pfsense.
-
What are you lan rules?
This really should be click turn it on, follow the bouncing ball = done..
It just works out of the box.
-
Yeah, I thought also, but ..
-
Which interface is that? Says source dmz net, but description say its the default lan rules?
Did you copy rules from lan to your dmz?
But then you have anti lock out... So you renamed lan to dmz?
But doesn't seem like you have accessed the gui from this network because no hits or state on the antilock out rule.
Are you running proxy or any other packages?
-
This is the original LAN interface, renamed to DMZ. So the rules originate from the DMZ interface. I'm accessing the GUI via WAN interface
-
@Omikron said in No web access in LAN:
I'm accessing the GUI via WAN interface
I am curious to why - is this pfsense remote I take it..
If you can ping, then pfsense is doing its nat thing correctly... Again sniff on your wan, when you have a client try and go to something via http... So you see the syn go out, with correct source IP (your wan) if so - what comes back...
-
Yeah, the pfsense runs in a virtualised environment with a proxmox as a hypervisor.
The syn goes out, but theres nothing is ever returned.
-
proxmox - and only ping works.. Yeah there was something I recall about that.. Having to turn off something.. Let me look.
Thought there was a sticky, something about offloading.. But that was years ago, not sure if still a thing... But you could try turn off all offloading.
But if your seeing syn go out and nothing return, that screams something upstream of pfsense.
-
This was the solution, thank you very much.
-
Glad you got it sorted - you really need to state up front what your using, be it hardware (make and type) or if your running on VM, if so what virtualization your using.
