Unifi as a simple access point
-
The primary benefit of UniFi, is that the controller centrally manages the configuration so you can quickly change settings on a dozen APs. With a single AP, it does give you some nice statistics and such if you have the controller running continuously.
-
Here running pfSense with UAP-AC-HD as accesspoint. Running great! Plays well with multiple vlans (if needed) and nice statistics. Coverage and speed of Unifi is very good (great value for money).
Its possible to run the controller software on your pfSense box. (Security wise maybe not advisable) -
Thank you for the response. Yes, that was pretty much my understanding, namely that the product range offers some benefits that are targeted at those with a good number of devices and therefore less relevant to me.
That said, I don't mind spending a few extra dollars if there are some extra features I might enjoy (the Pro is only about $140, I believe. so not a huge amount). So I guess I'm interested in the features, if any, that are not focused on multi-device management. The overlap with PFSense, for example, in "reporting", is one example I'd like to learn more about.
Thank you again.
-
@Rai80 Thank you. I learned a couple of days ago that I can run the Unifi Controller software on PFsense but, for the reason you mentioned, I don't have any interest in that.
I believe another option are to install a Cloud Key (which just seems too expensive for my simple needs). But I also understand I can install the software on a Raspberry Pi and, with some other potential opportunities I might accrue with that (along with the geek factor), I am considering a Raspberry Pi 4, with 4GB RAM. Who knows... :)
By the way, am I correct in saying that the controller software is required to expose/run some features, but is not necessary to operate the basic access point functionality?
Thank you again.
-
@Rai80 Quick additional question.
I guess another option I have is to REPLACE my existing ASUS Wifi Router with an UAP-AC-Pro and use VLANs to separate the IOT and private devices, instead of installing it alongside the ASUS router.
Do I have that correct? If so, the VLANs are added/configured on PFSense and the Unifi device just supports them, yes?
Are there are major benefits/drawbacks (beyond single-point-of-failure) over using VLANs as described above, compared to having two physical access points?
-
@markwill Correct. You need the controller for initial setup and for changes. Once its running you don't need it.
If you want to record statistics you will need a permanent connection with the controller. -
I run the UniFi AP-AC-Pro with a pfsense firewall and they play well together.
The most important advantage for me is the ability to setup VLANs. With this access point you can deploy different WiFi networks and separate them completely, No need for another access point. If you don't need the fancy statistics just run the controller on a PC and do the setup from there. Stability is the other strong point of this access point. It's one of those set it and forger it devices. -
You don't need the expensive Cloud Key or the Unifi Controller software at all.
Just use the Unifi app on your phone and configure the device as Standalone, easy.
This is what I do with my UAP-AC-Pro -
I was like that before, but if you want to use VLANs you need a controller. I guess it all depends of your needs.
-
For running standalone with VLANs (and a bunch of other things) there's always: https://openwrt.org/toh/ubiquiti/unifiac
Steve
