Problem after update
-
Hi,
I did a update today and my SG1000 dont start.
I login via console and the pfsense dont start properly ie It boot up with command line.
I can start the menu with /etc/rc.initial but with error messages:[2.4.5-RC][jolut@]/home/jolut: /etc/rc.initial
PHP Warning: fopen(/dev/icee0): failed to open stream: Permission denied in /etc/inc/system.inc on line 2425Warning: fopen(/dev/icee0): failed to open stream: Permission denied in /etc/inc/system.inc on line 2425
*** Welcome to pfSense 2.4.5-RC (arm) on StargateSGC ***
WAN (wan) -> cpsw0 ->
LAN (lan) -> cpsw1 -> v4: 192.168.2.1/24
ofwdump: could not open /dev/openfirm: Permission denied
mount: /dev/ufsid/59ed36fc69455e10: Operation not permitted- Logout (SSH only) 9) pfTop
- Assign Interfaces 10) Filter Logs
- Set interface(s) IP address 11) Restart webConfigurator
- Reset webConfigurator password 12) PHP shell + pfSense tools
- Reset to factory defaults 13) Update from console
- Reboot system 14) Enable Secure Shell (sshd)
- Halt system 15) Restore recent configuration
- Ping host 16) Restart PHP-FPM
- Shell
How can I solve this? I cant access internet thru WAN.
Regards, Jörgen -
What is the actual error when you try?
That error is from running the menu as a non-root user. That would not be an error preventing anything else from working.
-
When I boot up from console as admin:
FreeBSD/arm (Amnesiac) (ttyu0)
login: XXXXXXX
Password: XXXXXXXX
[2.4.5-RC][jolut@]/home/jolut:Menu don't start so I enter /etc/rc.initial as seen in previous post.
When I try to boot up with LAN, I can't access the device at all
-
Before that
-
Thanks for the replys!!
I only found this:WARNING: too long kenv string, ignoring uboot.Fatboot=env exists loaderdev || en v set loaderdev ${fatdev}; env exists UserFatboot && run UserFatboot; env exists trynetboot && env exists Netboot && run Netboot; echo Booting from: ${fatdev} $ {bootfile}; fatload ${fatdev} ${loadaddr} ${bootfile} && go ${loadaddr};
CPU: ARM Cortex-A8 r3p2 (ECO: 0x00000000)Parse error: syntax error, unexpected ']' in /etc/inc/filter.inc on line 2390
Parse error: syntax error, unexpected ']' in /etc/inc/filter.inc on line 2390
-
There was a problem with one of the snapshots yesterday which could have caused that. You can fix it one of two ways:
- Login as root, manually edit the lines it mentions using
vi
oree
and remove the extra bracket from both lines. - Reinstall using a current snapshot
- Login as root, manually edit the lines it mentions using
-
up and running.
Thanks a lot!