Bypass At&t fiber BGW210-700
-
I also did a clean install of pfsense and tried the package install of etf with no success.
-
you had it going correctly....and just so you understand you're still keeping the gateway, its just off to the side now
make sure you search 'pkg search etf' then 'pkg install ng_etf-kmod'
and use the shellcmd package from the package manager rather than editing that xml file; that gave me problems trying to edit it manually
-
ok thanks...will try the shellcmd to edit the xml
-
installed pkg shellcmd
<earlyshellcmd>/root/bin/pfatt.sh</earlyshellcmd> earlyshellcmd ATT bridge
getting an error stating sh: syntax error: end of file unexpected (expecting word)
directly after loading configuration completes. -
Do you get that same error if you just run the script at the command line?
It seems like the script may not be complete if it's showing that error. How did you copy it onto your firewall?
Steve
-
this is how your file should be - just replace with your modems mac address
#!/bin/sh set -e ONT_IF='igb0' RG_IF='igb1' RG_ETHER_ADDR='********LEAVE Apostrophes****************' OPNSENSE='no' LOG=/var/log/pfatt.log getTimestamp(){ echo `date "+%Y-%m-%d %H:%M:%S :: [pfatt.sh] ::"` } { echo "$(getTimestamp) pfSense + AT&T U-verse Residential Gateway for true bridge mode" echo "$(getTimestamp) Configuration: " echo "$(getTimestamp) ONT_IF: $ONT_IF" echo "$(getTimestamp) RG_IF: $RG_IF" echo "$(getTimestamp) RG_ETHER_ADDR: $RG_ETHER_ADDR" echo "$(getTimestamp) OPNSENSE: $OPNSENSE" echo -n "$(getTimestamp) loading netgraph kernel modules... " /sbin/kldload -nq ng_etf echo "OK!" if [ ${OPNSENSE} != 'yes' ]; then echo -n "$(getTimestamp) attaching interfaces to ng_ether... " /usr/local/bin/php -r "pfSense_ngctl_attach('.', '$ONT_IF');" /usr/local/bin/php -r "pfSense_ngctl_attach('.', '$RG_IF');" echo "OK!" fi echo "$(getTimestamp) building netgraph nodes..." echo -n "$(getTimestamp) creating ng_one2many... " /usr/sbin/ngctl mkpeer $ONT_IF: one2many lower one /usr/sbin/ngctl name $ONT_IF:lower o2m echo "OK!" echo -n "$(getTimestamp) creating vlan node and interface... " /usr/sbin/ngctl mkpeer o2m: vlan many0 downstream /usr/sbin/ngctl name o2m:many0 vlan0 /usr/sbin/ngctl mkpeer vlan0: eiface vlan0 ether /usr/sbin/ngctl msg vlan0: 'addfilter { vlan=0 hook="vlan0" }' /usr/sbin/ngctl msg ngeth0: set $RG_ETHER_ADDR echo "OK!" echo -n "$(getTimestamp) defining etf for $ONT_IF (ONT)... " /usr/sbin/ngctl mkpeer o2m: etf many1 downstream /usr/sbin/ngctl name o2m:many1 waneapfilter /usr/sbin/ngctl connect waneapfilter: $ONT_IF: nomatch upper echo "OK!" echo -n "$(getTimestamp) defining etf for $RG_IF (RG)... " /usr/sbin/ngctl mkpeer $RG_IF: etf lower downstream /usr/sbin/ngctl name $RG_IF:lower laneapfilter /usr/sbin/ngctl connect laneapfilter: $RG_IF: nomatch upper echo "OK!" echo -n "$(getTimestamp) bridging etf for $ONT_IF <-> $RG_IF... " /usr/sbin/ngctl connect waneapfilter: laneapfilter: eapout eapout echo "OK!" echo -n "$(getTimestamp) defining filters for EAP traffic... " /usr/sbin/ngctl msg waneapfilter: 'setfilter { matchhook="eapout" ethertype=0x888e }' /usr/sbin/ngctl msg laneapfilter: 'setfilter { matchhook="eapout" ethertype=0x888e }' echo "OK!" echo -n "$(getTimestamp) enabling one2many links... " /usr/sbin/ngctl msg o2m: setconfig "{ xmitAlg=2 failAlg=1 enabledLinks=[ 1 1 ] }" echo "OK!" echo -n "$(getTimestamp) removing waneapfilter:nomatch hook... " /usr/sbin/ngctl rmhook waneapfilter: nomatch echo "OK!" echo -n "$(getTimestamp) enabling $RG_IF interface... " /sbin/ifconfig $RG_IF up echo "OK!" echo -n "$(getTimestamp) enabling $ONT_IF interface... " /sbin/ifconfig $ONT_IF up echo "OK!" echo -n "$(getTimestamp) enabling promiscuous mode on $RG_IF... " /sbin/ifconfig $RG_IF promisc echo "OK!" echo -n "$(getTimestamp) enabling promiscuous mode on $ONT_IF... " /sbin/ifconfig $ONT_IF promisc echo "OK!" echo "$(getTimestamp) ngeth0 should now be available to configure as your pfSense WAN" echo "$(getTimestamp) done!" } >> $LOG -
(1) I copied PFatt.sh as raw file to notepad.
(2) Made the changes as noted saving changes using semi colon " at beginning and at end of name to ensure it save as correct file type .sh
(3) used command prompt in pfsense webgui to upload to tmp directory.
(4) SSH into pfsense using putty to create directory root/bin.
(5) used file editor in pfsense to copy file to root/bin. -
Notepad can break stuff completely. I recommend Notepad++ in Windows, though it's been a few years since I last used it.
If you open the file in Diag > Edit file does it looks correct?
Steve
-
It looks correct from what I can tell...what if I copied it directly to the pfsense file edit made the changes there then save it as file type .sh? Does that eliminate the possibility of coruption?
-
Yes. Or just pull it directly into pfSense and then edit it in the webgui:
Steve
-
@stephenw10 said in Bypass At&t fiber BGW210-700:
/root/bin/pfatt.sh
Did it got the same syntax error.
-
Sorry wrong file path there. Try this:
[2.5.0-DEVELOPMENT][admin@fw321.stevew.lan]/root: fetch -o /root/bin https://raw.githubusercontent.com/aus/pfatt/master/bin/pfatt.sh /root/bin/pfatt.sh 3309 B 11 MBps 00s -
now I am getting the following error...kldload: an error occurred while loading the module. Please check dmesg(8) for more details. It appears I might be out of luck.
-
Can you load the module manually?:
kldload ng_etf.ko -
nope same error...can I download ng_etf.ko to /boot/kernel directly.
-
Hmm, and you got that module from the repo using pkg install?
-
@stephenw10 it says the pkg is installed gonna delete it and reinstall now.
-
That sort of error can often be because the module is wrong, from the wrong FreeBSD version or wrong architecture, but that cannot be the case if you installed it from the repo.
-
ok ran the pkg installer again it says installed but when I look in /boot/kernel I don't see the ng_etf-kmod file.
the original file was from https://github.com/aus/pfatt/blob/master/bin/ng_etf.ko -
It installs it to /boot/modules. It installs and load fine or me here.
What hardware are you running this on?
