Static Routing on Additional Lan Gateway
-
@johnpoz can you please point out where should i make changes and what changes to make this work.
-
your way with the transit is all you need.. Setup a gateway to the 196 network on pfsense. And then you would need return on the mikrotik if using transit.
Your device in the 196 don't need any routes, nor your wan enterprise router because you are natting at the mikrotik
-
-
@johnpoz said in Static Routing on Additional Lan Gateway:
your way with the transit is all you need.. Setup a gateway to the 196 network on pfsense. And then you would need return on the mikrotik if using transit.
Your device in the 196 don't need any routes, nor your wan enterprise router because you are natting at the mikrotik
Yes i did add that static route to 196.29.149.0/24 after adding a 10.10.10.150 gateway on lan interface. Post that i made a rule to pass the traffic for 196.29.149.0/24 network through 10.10.10.150 gateway..
-
@Rupesh said in Static Routing on Additional Lan Gateway:
@johnpoz said in Static Routing on Additional Lan Gateway:
your way with the transit is all you need.. Setup a gateway to the 196 network on pfsense. And then you would need return on the mikrotik if using transit.
Your device in the 196 don't need any routes, nor your wan enterprise router because you are natting at the mikrotik
Yes i did add that static route to 196.29.149.0/24 after adding a 10.10.10.150 gateway on lan interface. Post that i made a rule to pass the traffic for 196.29.149.0/24 network through 10.10.10.150 gateway..
and this is why i am not getting what i am expecting.. i mentioned this is in the first post
-
ok.. so if the gateway on the microtik is 149.36 you need to add a static route on the mikrotik for the 10.10.10.0/24 network .. ?
-
@kiokoman said in Static Routing on Additional Lan Gateway:
ok.. so if the gateway on the microtik is 149.36 you need to add a static route on the mikrotik for the 10.10.10.0/24 network .. ?
correction !! gateway o mikrotik 192.168.149.36.
On my PF sense firewall I tried to add additional gateway 10.10.10.150 on LAN and added static route for 196.29.149.0/24 network also i added one firewall LAN rule to pass traffic from LAN net to 196.29.149.0/24 with gateway as 10.10.10.150 in advanced settings.
after all this setup i am able to open windows share as desired but whenever i am trying to move files from 10.10.10.0/24 network to windows share it just says "failed" after keeping coping window in preparing mode for sometime. However if i copy data from windows share to 10.10.10.0/24 side then its flawless.
also i can open the printer webpage with no issue..its just that unable to copy data from pf-sense LAN network to miKkotik wan network.moreover if i set a new pf sense firewall with cloud core router as wan gateway and wan ip as 10.10.10.90/24 then everything gets resolved, so for sure this inst an issue of Mikrotik cloud-core router.
-
OMG.... Where did your transit go?? YOU have an asymmetrical mess
Create a transit network between pfsense and mikrotik like you had before..
-
@johnpoz said in Static Routing on Additional Lan Gateway:
OMG.... Where did your transit go?? YOU have an asymmetrical mess
Ohh now I see...
So What is your solution about this? What is the point of having another gateway in LAN interface...Point to be noted "I had setup static route for desired network this LAN gateway".
-
route on pfsense to 172.16.0.1 to get to 196.29 network
route on mikrotek to get to 10 network 172.16.0.2This is basic 101 networking - there is nothing fancy about this..
If your going to put clients on a transit network then you have to use host routing or source natting, or your going to have issues with asymmetrical traffic... Hosts do not belong on a transit network!!!
No natting will be done between 10.x and 172.16
-
@johnpoz said in Static Routing on Additional Lan Gateway:
route on pfsense to 172.16.0.1 to get to 196.29 network
route on mikrotek to get to 10 network 172.16.0.2This is basic 101 networking - there is nothing fancy about this..
If your going to put clients on a transit network then you have to use host routing or source natting, or your going to have issues with asymmetrical traffic... Hosts do not belong on a transit network!!!
No natting will be done between 10.x and 172.16
So I need to create a transit network ?
-
YES!!!! unless you want to create routes on all your devices in the 10 telling them how to get to the 196 network so your not asymmetrical...
-
@johnpoz got it now..will try it out tomorrow morning in my lab and will let you know...
