Howto setup this XG-7100

[Udbytossen]

Hi Forum
I have this XG-7100 Where it'll have an internal switch function with 8NIC - and 2NIC as uplink + 2SFP+ porte.
Since I have sfp+ on my Ubiquity Switch - I would like to move to use the fiber instead of the RJ45 NICS.

As default this have ix2+ix3 as LAGG0 internal Uplink 2,5Gb and then adding the VLANS to LAGG0
Is it meant then adding LAGG1 as ix0 - and then use LAGG1 as the Parent interface.
And then change all settings where LAGG0 is the parent ( I have 6 Subnets)

And then it should be working - I'm asking before starting this network change since this is a hudge change and reprogramming of switches etc - but would like to use 1 fiber instead of 6RJ45 cables to the Switch-

Is this correctly understood - or can I just add the ix0 to the LAGG0 ( wrong in my headf)

Thanks in advance

[stephenw10]

You cannot add the SFP ports to the existing lagg and you need the lagg to the switch anyway.

So, yes, I would create a new lagg (lagg1) with ix0 and ix1 in it and connect that to the Ubiquity Switch. You can then use LACP on that lagg which would be a far better choice there than loadbalance.

Steve