Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    PRIQ wizard improvement suggestion

    Scheduled Pinned Locked Moved Traffic Shaping
    1 Posts 1 Posters 299 Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Raffi_R
      Raffi_
      last edited by

      I'm not having any issues, but I did want to reference the old thread below since it's still relevant in 2.4.4-RELEASE-p3. It seems like it might be something that could be improved on in the Traffic shaping wizard.
      Re: Wizard sets default qLink Lower than qOthersLow

      I read all the official documentation on Traffic shaping, which was very well documented (thanks for that). I setup a basic PRIQ with my only real concern being VOIP traffic so I checked that box and left just about everything else blank. I did also make RDP and VNC a higher priory during those steps. It seems to be working fine, but on my LAN and OPT1, the default qLink is set to priority 2 while qOthersLow is set to 3 by the wizard. This made no sense to me since my WAN and 4G LTE interfaces both had this the other way around. I manually changed the LAN and OPT1 so qLink is set to priority 3 and qOthersLow is set to 2. Am I wrong in doing so? If not, can this be improved on in the wizard so those are reversed by default?

      Thanks,
      Raffi

      1 Reply Last reply Reply Quote 0
      • First post
        Last post
      Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.