WAN upgrade from /29 to /28
-
@kenttec Hopefully, others will chime in...I understand your situation.
-
@NollipfSense I know its a bit of an odd one as usually you'd get a fresh bunch of IP's/subnet/gateway when going from /29 to /28.
-
the only thing that change from /29 to /28 is the max host available from 6 to 14, if the block of addresses remains the same
you just need to change netmask from /29 to /28 -
@kiokoman Thats good news, so I can do this remotley in GUI and then ask ISP to initiate changes
-
you can do it before or after it doesn't really matter,your connection will not disrupt, the gateway remain the same
-
@kiokoman Oh OK, I thought you needed the correct subnet for connectivity to work, so I could change it now and still have connectivity? Then contact ISP Monday
-
buh, i tried it on my config and i didn't lost connectivity , i have a /29 where i have my ip added as virtual ips, i changed my wan interface to /28 and nothing happened
-
@kiokoman thank you for testing it and confirming. That’s great news.
-
It may also depend on where your block is allocated. a /29 could start in the middle of a /28. But if the network address of both is the same, then you're probably OK.
For example:
- 198.51.100.32/28 goes from 198.51.100.33 - 198.51.100.46 (with 32 being the network address and 47 being the broadcast)
- 198.51.100.32/29 is contained within 198.51.100.32/28 and goes from 198.51.100.33 - 198.51.100.38 (same network ID, but 39 as broadcast)
However:
- 198.51.100.40/29 is also contained within 198.51.100.32/28 but goes from 198.51.100.41 - 198.51.100.46 (with 40 being network ID, 47 as broadcast)
So if your /29 and /28 use the same network ID then you probably only need to adjust the subnet mask. But if the /29 started halfway into a /28, then you may want to make other adjustments as well. Like if your firewall is using the first usable IP address, you might want to shift that down to match the new subnet.
Run the old and new subnet through a subnet calculator to be certain.
-
@jimp Thanks for the heads up, Im not aware of my /28 addresses yet so I will hold fire on adjusting anything.