NAT in vmware not working.. access to mgmt works
-
I am trying to access a web application behind firewall that is setup in vmware workstation and NAT is not working.
Is there any thing wrong with this config. why NAT is not working and i don't see port 5600 open in scan.Vmware info
WAN > NAT(vmware) > PFsense IP (192.168.40.134/24)
LAN > HOST(vmware) > Pfsense IP (192.168.1.1/24)
CENTOS > HOST (vmware) > IP 192.168.1.102/24NAT
WAN> TCP/UDP > Source addr/Port (Any/Any) > Dest Addr/port (WAN Address/5600) >TArget IP/port (192.168.1.102/5600) > automatic rule creationExtra Firewall Rule for Web mgmt from outside WAN,, this however works
TCP/443 > Source addr/Port (Any/Any) > Destination (Wan Address)pcap, traffic hitting external WAN IP of pfsense
20:57:41.263643 IP 192.168.40.1.25955 > 192.168.40.134.5600: tcp 0
20:57:41.515128 IP 192.168.40.1.25956 > 192.168.40.134.5600: tcp 0
20:57:42.264873 IP 192.168.40.1.25955 > 192.168.40.134.5600: tcp 0
20:57:42.514419 IP 192.168.40.1.25956 > 192.168.40.134.5600: tcp 0nmap scan shows only 1 port on WAN
PORT STATE SERVICE VERSION443/tcp open ssl/http nginx