NETGATE SG-1000 update to 2.4.4
-
Hi!
To try debugging an openvpn problem I have, I activate our old Netgate SG-1000, we normally use for remote access in the field.
While upgrading from 2.3 to 2.4.4 I waited for a very long time after the system reported "now rebooting..." (I actually did something else at home), but it never came back.
I power cycled the SG-1000 but I couldn't connect to it again. After using the serial console, I found out that something really went wrong with the update.
Here is the serial output:
__ _ __ / _|___ ___ _ __ ___ ___ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ | |_) | _\__ \ __/ | | \__ \ __/ | .__/|_| |___/\___|_| |_|___/\___| |_| Welcome to pfSense 2.4.4-RELEASE (Patch 3)... ...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.26/mach/CORE Soft Float compatibility ldconfig path: done. Launching the init system... Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 PHP ERROR: Type: 64, File: /etc/inc/config.inc, Line: 51, Message: require_once(): Failed opening required 'Net/IPv6.php' . Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 pfSense 2.4.4-RELEASE (Patch 3) arm Thu May 16 06:01:19 EDT 2019 Bootup complete FreeBSD/arm (Amnesiac) (ttyu0) login: admin Password: Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 1 Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 Warning: PHP Startup: Unable to load dynamic library 'sqlite3.so' (tried: /usr/local/lib/php/20170718/sqlite3.so (Shared o0 Warning: PHP Startup: Unable to load dynamic library 'pdo_sqlite.so' (tried: /usr/local/lib/php/20170718/pdo_sqlite.so (Sh0 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + pfSense tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Enable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option:I actually can't do anything, it always produces the PHP errors.
Is there any way to fix this? I really would like to have the little red thing back working!
-
The fastest way will be to re-image it to 2.4.4p3 directly.
Open a ticket with us here and we can get you the image: https://go.netgate.com/Steve
-
Hi @stephenw10 !
Opened ticket -> got your reply -> downloaded firmware -> installed it on the SG-1000 -> uploaded configuration -> Everything is working again!
Thanks!
-
Great to hear.
