1 vlan over 2 switches
-
Did you change the PVID of the ports that you moved to new vlan... You would hope the switch would auto do that, but you might have to change do it by hand... Make sure whatever vlan you put a port in that is untagged, that you change the pvid of that port to the vlan you assign untagged.
-
Downstairs switch
port 1 is tagged ( trunk between both switchs )
Port 2 is tagged and goes to pfsense.
Port 8 is untagged, goes to the wifi
All other ports are left untaggedUpstairs switch
Port 1 is tagged ( trunk )
Port 8 is untagged and goes to wifi
Port 7 is untagged and is for unraid
All other ports are left untaggedOnly ports that have a pvid are ports 8 on both switch which have are pvid 2 and port 7 of the upstairs switch which has a pvid of 20
If this helps
Downstairs switch
Port 1 - 2 - 8 are in vlan2. Ports 1 and 2 are tagged, port 8 untagged and has pvid2
Ports 1 and 2 are tagged and are in vlan20
Upstairs switch
Ports 1 and 8 are in vlan2 port 1 tagged and 8 untagged with 8 having pvid2
Ports 1 and 7 are in vlan20 with port 1 being tagged and 7 untagged and has pvid20
-
@michael178212 said in 1 vlan over 2 switches:
if I'm upstairs and disconnect my phone from the wifi and then reconnect then I can't connect and dont get assigned an ip
When you say can't connect - you mean you can not auth and connect to the wifi, or you actually connect to the wifi but just don't get an IP and end up with 169.254.x.x as your IP?
If you can not actually auth and associate to the wifi, then no you wouldn't get an IP.
-
My phones tries to connect as it says connecting but just dosnt connect both passwords are the same and ssids along with same WPA encryption. After a few attempts it gives me a 'cant get ip' message and ask me to reboot router.
Would this work.
Make another vlan Id from the downstairs switch. Connect another ethernet cable from the wifi router to the switch and then just trunk my up to the other wifi router upstairs?
So it'll go like this
Downstairs switch
Vlan2 ports 2 and 8, 2 being tagged and going into pfsense and 8 being untagged and going into wifi router with pvid2 ( as that's setup in pfsense )
Make a new vlan so let's call this one vlan50
Vlan50 has ports 7 and 1. 1 being trunk and tagged and 7 being tagged and goes into a spare port of the wifi routerUpstairs switch
Make a new vlan, vlan50
Ports 1 and 8 in vlan50 with 1 be tagged ( trunk ) and 8 being untagged and going into wifi router ?
Didnt think itll be this hard
-
Or am I just over complicating things and the actual setup of the vlans are correct and it can just be somthing to do with the wifi routers
-
@michael178212 said in 1 vlan over 2 switches:
gives me a 'cant get ip' message and ask me to reboot router.
When you do that look on pfsense - do you see a discover for IP or request... Pfsense can not hand out an IP if doesn't see the discover or request...
-
In system logs under dhcp I'm getting dhcp requests and dhcpacks but have had a few of this messages
uid lease 10.10.10.103 for client a8:db:03:e4:a9:5a is duplicate on 10.10.10.0/24
Am I right in thinking that this is basically saying. You cant give that mac address ( my phones mac address ) that ip as it already has an ip ( static 10.10.10.10) ? If so then this would stop the ip from being released wont it or am I completely wrong lol?
-
Now I'm home, I've looked at the logs again and I do have some dhcp discoverys, offers, requests and acks but still have that duplicate message. So what I ll try is disconnect the downstairs wifi router and see what the logs say.
-
@michael178212 said in 1 vlan over 2 switches:
a8:db:03:e4:a9:5a
Who owns this mac - what device is it? Look up shows its a Samsung device
https://hwaddress.com/oui-iab/A8-DB-03/ -
Sorry yeah it's a samsung phone.. just tried how I said I would and with just one ( upstairs wifi router ) connected, my phone will connect to the wifi and on the right subnet but without internet. Tried changing dns, that didnt work so not a dns issue.
