[As Good As Solved!] Watchguard Firebox Arm/Disarm LED

rhombus

Sweet, thanks for the code, it worked like a charm, appears within 2 degrees of mbmon at any one point. Looks like I need to throw some arctic silver on the heatsink. This is fan at 32

I had my fan set at 52 on a Pentium M 735 and at 37C. On high load, it will come up to 50. Im not worried about the $7 processor so much as having the system lock up when I am away. lol

Gabri.91

Very nice, many thanks!

browntown

I'm building my wgxepc script for reboot. Can I pass two parameters in one command?
/usr/local/bin/WGXepc -l green -f 30

or do I pass each argument on its own line?
#!/bin/sh

/usr/local/bin/WGXepc -l green
/usr/local/bin/WGXepc -f 30

stephenw10

Only one parameter at a time. My coding skills very limited. ;)
I use the shellcmd package instead of an RC script. It is stored in configuration file so it survives a firmware update.

Steve

rhombus

@stephenw10:

Nice. :)
Let me know if it seems stable. It should be identical to mbmon but like I said another user found mbmon giving bad numbers after several days. Also mbmon has 0.5°C accuracy but I didn't both reading that register so it's only 1°C accurate. ::)

Steve

7 days of uptime and still displaying the correct temp. So far everything appears stable.

A Former User

Hello,

just installed it and runs fine.

Does anyone need the output of

pciconf -r pci0:31:0 0:256
```?

stephenw10

@pyroblast:

Does anyone need the output of
pciconf -r pci0:31:0 0:256

Thanks for offering but the X1250e is identical to the other boxes we have tested already. So unless you have some odd variant we already have the info. Since the program recognises your box already it seems it's using the same board. :)

Steve

fibrewire

sorry for the necrobump, but where did this project end up?

stephenw10

It ended up here: https://github.com/stephenw10/WGXepc

And here if you want to test it on one of the newer devices.

Steve

Hackdaddy

Hi,

Thanks @stephenw10 for your tool.

I packaged it in a widget, to use it with the web interface and automatically change the fan speed depending on the temperature.

For those interested: pfSense-Watchguard-widget

Best regards

stephenw10

Ah, nice.
For the X-e boxes only I assume? Pretty sure I never added temperature reading to any others.
Edit: Forgot the XTM8.

Steve

Hackdaddy

Yes, I only have a firebox X750e, so I only make this widget for my usage :)
But don't hesitate to make a pull request if you want add more compatibility