DNS issue while connected to OpenVPN
-
@jimp
Ok, so if i want this setting to be active i must export a new Windows client configuration correct?by default DNS resolver is enabled, im not sure where the ACL where can i check this?
thanks
-
That wouldn't affect VPN clients in any way, only the firewall itself.
-
Ok..
Also make sure that the DNS resolver is configured with an ACL to allow the OpenVPN client subnet to make DNS queries. how can i check this settings?
thanks
-
Services > DNS Resolver, Access Lists tab
-
do you use the netBios setting ?
out of the blue
brNP -
@noplan if you are referring to this? then yes
-
@jimp looks like DNS resolver is not enabled, can i still proceed to add the ACL or this must be enable first?
-
Are you using the DNS Forwarder then?
Or what are the clients using for DNS if not the firewall?
-
@jimp DNS forwarders also not enabled.
our clients is using our Windows DNS servers..
configured on here System > General Setting
and here for OpenVPN
-
OK so the firewall would not be involved in their DNS at all. The "Block outside DNS" box is about all you can do there other than trying to solve client issues.
-
@jimp Ok.
so for the "Block outside DNS" i need to generated a new Windows client configuration with "Block outside DNS" tick to get this setting in effect?
-
You can check the box on the server which may help. If it doesn't, then try exporting a fresh client.
If neither one helps then it's something else entirely, most likely not in OpenVPN. Could be on the client or the DNS server, but either way, not pfSense and unlikely to be OpenVPN.
-
@jimp Thanks jimp.. I will do some testing first. Thanks!
-
@jimp base on my testing the user still encounter the same problem unable to resolves DNS hostname.
my openvpn subnet is 10.50.0.0/22, i noticed when the user is getting 10.50.1.X ip address they encounter the DNS issue.
i dont have any clue where to check next, any advice will be greatly appreciated. Thanks
-
@albertmiclat said in DNS issue while connected to OpenVPN:
the user is getting 10.50.1.X ip address
Ok for the IP, but what about the IP of the DNS the client received ? Why not mentionning it ? The gateway and mask while you're at it.
The DNS IP is your DNS server in your/a network ? Can it be accessed by the OpenVPN client ? Is the DNS set up to receive DNS requests from OpenVPN clients ?
Note : You're not using pfSense as a DNS for your networks, but some other device. So pfSense OpenVPN server should be set up accordingly. How ? depends on your network ....I guess you should use :
where a.b.c.d is your DNS.
-
@Gertjan this setting are set accordingly.
users also getting the right configurations
cannot ping both ip and hostname
-
here's is one of the user who are not having issue can ping both ip and hostname and the ip address is 10.50.0.x
-
what is the local network of these clients that don't work..
So the ipconfig /all for these clients, and the routing table
route print
-
-
Well no overlap with the local network..
When you do a tracert to 10.25.1.38, you see first hop is end of the tunnel?
Can you ping the end of the tunnel? See the gateway listed there in the route print 10.50.1.37
