pppoe with no modem
-
@DaddyGo That could be either auto or some specified connection, such as 1000baseT, depending on what the ISP requires. I've seen both.
BTW, on pfSense 2.4.5, it says Speed and Duplex, not Media.
-
i have no limit to use the modem of the isp
i have anothe router that connects and get speed of about 500mb
in pf sense there is no media/speed tab
in lan i do get media type of 1000 base t
-
this is wan tab in inteface status
-
what is your exact system? FTTH / DOCSIS / VDSL :-)
I expect something like this from you: ISP ONT or modem + ISP router + etc. -
A blank WAN tab means it doesn't work for you
-
fiber to rj45 adapter (just to change the connection type), cat 6 cable , pc with pfsense - thats all
also
no i am getting 94 mb up and down
-
@DaddyGo its not blank i gave the printscreen with no data :) to show there is no media or speed tab
-
fiber to rj45 adapter = ISP ONT???
Do you have a router supplied by your ISP? -
@avnpf said in pppoe with no modem:
this is wan tab in inteface status
Look on Interfaces > WAN, not status.
-
Very interesting and have a 94Mbits connection?
-
yes, maybe its an ont
jknott - i searched there there is no speed duplex tab, in lan interface there is
-
@avnpf said in pppoe with no modem:
fiber to rj45 adapter
Those can be either fixed 1000baseT (or 100 Mb on older gear) or auto. Your ISP should tell you.
-
LAN is not interesting here
-
@avnpf said in pppoe with no modem:
i searched there there is no speed duplex tab, in lan interface there is
That doesn't make sense. Perhaps a screen capture of the Interface > WAN page would help.
-
-
Restart the WAN interface, then what do you see in the logs?
-
That indicates a 100 Mb connection. If that's all you're getting, then perhaps you should be talking to your ISP. In the mean time, that screen capture I asked for would help.
-
It is even conceivable that you do not see media type but no IP addresses with MAC data ....... it's weird
No other internet source 4G dongle or WiFi, other eth. connection is connected to your computer?
He have already posted a picture of the WAN interface aboveCats bury it so they can't see it!
(You know what I mean if you have a cat) -
so i change between the two network cards interface
before i change to ppoe i have media tab and its written 100 mb
when i change to pppoe the media tab disappear
-
so the problem was a long cable between the ONT and the PF (20 m)
because when i connected it to a meter cable i got 1000 mb linestill now i get speed of 300mb but that is identical to the isp router and an asus a68 router
thank you
