FreeRadius 3 authentication problem on pfsense 2.4.4
-
I am currently using Freeradius3 on netgate XG7100 device running a software version 2.4.4 p2.
i am trying to authenticate my juniper switch using radius login authentication. As per juniper support, radius server configuration on the switch is fine. I can see the switch requesting for access on Pfsense box ( in packet capture ), but do not see any reply going back to the switch to grant access. I am attaching the packet capture if this helps.14:29:35.122385 f8:b1:56:36:0c:15 > 00:08:a2:0e:da:3d, ethertype IPv4 (0x0800), length 171: (tos 0x0, ttl 63, id 22814, offset 0, flags [none], proto UDP (17), length 157)
10.15.1.254.64440 > 10.14.1.196.1812: [udp sum ok] RADIUS, length: 129
Access-Request (1), id: 0xa4, Authenticator: 4a3ce6b51f039c091ee79474bed4acbc
User-Name Attribute (1), length: 6, Value: test
0x0000: 7465 7374
Vendor-Specific Attribute (26), length: 24, Value: Vendor: Microsoft (311)
Vendor Attribute: 11, Length: 16, Value: ...W..1e..38...T
0x0000: 0000 0137 0b12 b3d4 0057 8fe2 3165 dfbf
0x0010: 3338 de10 de54
Vendor-Specific Attribute (26), length: 58, Value: Vendor: Microsoft (311)
Vendor Attribute: 25, Length: 50, Value: ..*..ZN.l?sd/$~5.........._J...:J.i...|Ra......D..
0x0000: 0000 0137 1934 a400 2af0 d25a 4ec4 6c3f
0x0010: 7364 2f24 7e35 b30d 0000 0000 0000 0000
0x0020: 5f4a 120a 9f3a 4ae0 69bf d482 7c52 6104
0x0030: 87e7 a9b3 0d44 aadf
NAS-Identifier Attribute (32), length: 15, Value: A06-WAT-SW01D
0x0000: 4130 362d 5741 542d 5357 3031 44
NAS-IP-Address Attribute (4), length: 6, Value: 10.15.2.2
0x0000: 0a0f 0202Can someone help with this configuration on pfsense? Thanks in Advance.
-
@nfern Please update pfSense to 2.4.5
and show the FreeRADIUS pages: NAS/Clients, Interfaces -
Hi,
I have upgraded to 2.4.5.
please find screenshots requested below.
still does not authenticate.