VLANs issues can ping but cant connect
-
Hello All, I currently using a custom box with pfsense, it has a 4 port nic but im only using 2 ports, WAN/LAN, LAN is connected to a unifi 24 port switch.
So i went ahead and create a VLAN (99), associated it with my LAN interface, created a DHCP server, and a firewall rule IPV4* *****.
I also created a VLAN only network/profile on my unifi switch and assigned to a specific port on the unifi, when i connect lets say a server to it. It correctly gets the right IP, and i can go online and what not, if i assign another port on the switch to this vlan and connect another host, it also works fine. Im even able to connect to port 80/443 on that server and get a custom website.
The problem is when i try to connect to that same server from another VLAN, i can ping the server and it replies but when i try to hit 443 i get: PR_CONNECT_RESET_ERROR
-
@SuperMiguel are you getting any entries in your firewall log?
-
@JohnKap i didnt but i rebooted all of my network equipment and it started working
not sure i understand what was happening so ill keep an eye on it.. Thanks for your reply. -
I found that after adding/changing vlans, nics and other major settings it always needs rebooted to work right.
also unifi gear can be slow to provision after changes, especially if using unifi cloud and/or remote network controller.