Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1

PinnacleDesigns

@radster said in Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1 (solved):

I have the same problem

pfSense 2.4.5_1

I successfully upgraded to cron 0.3.7_4, snort 3.2.9.12, squid 0.4.44_26 - squidGuard upgrade from 1.16.18_5 to 1.16.18_6 only gets as far as Deinstall commands... done

I am having the same issue.

biGdada

@radster said in Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1 (solved):

I have the same problem

pfSense 2.4.5_1

I successfully upgraded to cron 0.3.7_4, snort 3.2.9.12, squid 0.4.44_26 - squidGuard upgrade from 1.16.18_5 to 1.16.18_6 only gets as far as Deinstall commands... done

same here. any solution?

dennis_s

Our engineers are aware and are investigating why some users are seeing updates issues with some packages.

In most cases running killall -9 pkg-static will allow the updates to continue.

dotcom

I have the same problem.
It still hangs even when done from terminal.

[2.4.5-RELEASE][root@pfSense]/root: pkg delete pfSense-pkg-squidGuard
Checking integrity... done (0 conflicting)
Deinstallation has been requested for the following 1 packages (of 0 packages in the universe):

Installed packages to be REMOVED:
        pfSense-pkg-squidGuard: 1.16.18_6

Number of packages to be removed: 1

Proceed with deinstalling packages? [y/N]: y
[1/1] Deinstalling pfSense-pkg-squidGuard-1.16.18_6...
Removing squidGuard components...
Menu items... done.
Services... done.
Loading package instructions...
Deinstall commands... done.

goodtm

@dennis_s said in Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1 (solved):

Our engineers are aware and are investigating why some users are seeing updates issues with some packages.

In most cases running killall -9 pkg-static will allow the updates to continue.

I started the package update, the update froze, executed a command, and the update was interrupted.. re-launched the package update, the package was updated successfully

_igor_

Changed back to "not solved", due to the big resonance!

Cássio Elias

@goodtm Apparently, this solution solved the SquidGuard problem for me! But I can't reinstall Squid, when trying to reinstall, even with this SquidGuard procedure, reinstalling Squid does not get off the line => "Writing configuration ... done."
And don't get out of that line ... weird ..

PaMi

Same issue after upgrade to 2.4.5p1
Can't uninstall squidguard by the shell :

[1/2] Deinstalling pfSense-pkg-squidGuard-1.16.18_5...
Removing squidGuard components...
Menu items... done.
Services... done.
Loading package instructions...
Deinstall commands... done.

PaMi

OK squid and squidguard uninstalled with :

pkg delete squidGuard

and

pkg delete squid

but can't reinstall. Stay on :

[1/1] Installing pfSense-pkg-squid-0.4.44_26...
[1/1] Extracting pfSense-pkg-squid-0.4.44_26: 100%
Saving updated package information...
done.
Loading package configuration... done.
Configuring package components...
Loading package instructions...
Custom commands...
Executing custom_php_install_command()...done.
Executing custom_php_resync_config_command()...done.
Menu items... done.
Services... done.
Writing configuration... done.

What can i do?

pr340

My solution:

Stop the squid for web;
From the terminal:

pkg delete squidGuard

for me solved.

SaschaITM

Same issue here on 2.4.5-RELEASE-p1 running in a VMware VM. There doesn't seem to be an easy fix, tried everything in this thread, and some additional stuff. The "killall -9 pkg-static" command (on a second shell) will just interrupt the uninstall procedure, it doesn't continue after issuing that command. I've noticed that when the procedure hangs there are two "pkg" processes which seem to be started close to each other (if not at nearly the same time), maybe that's the issue? Like some kind of race condition, triggered by a typo/special character or something like that in the package itself?

Aiken

After comment below command in /usr/local/pkg/squidguard.inc

squid_reconfigure('remove redirector options');

I can remove the old package and install new package manually.

biGdada

@Aiken worked for me, thanks alot

alexela

@Aiken said in Squidguard update fails after upgrading pfSense 2.4.5-RELEASE-p1:

/usr/local/pkg/squidguard.inc

@Aiken Thank you, this does the trick for me too.

A Former User

Thank you @Aiken! This is the only solution that has worked for me. After commenting out that line I was able to upgrade squidGuard via the WebGUI

rcfa

I have the same issue with 2.4.5, 2.4.5-p1 and 2.5.0-DEVELOPMENT.

It always involves one or more of the following packages:
pfSense-pkg-ntopng
pfSense-pkg-squidGuard
pfSense-pkg-squid

Whereby the first two are a recent addition, Squid gave be trouble for a while, in that it would fail upgrading, so each time I had to remove and install as separate steps. Now that fails, too.

Some of them can be installed on the command line, some hang even there after "Writing configuration... done."

sisko212

looks to be an issue on latest versions of package manager, not Squid or Squidguard or other packages related.
There are also other post claiming same issue:
https://forum.netgate.com/topic/154389/2-4-5r1-update-no-package-re-install

tmsongster

I was having the same issue. Solved it thusly:

squidGuard re-install was already in progress
Went to Services>Squid Proxy Server (PackageProxy Server: General SettingsGeneral)
UN-checked "Enable Squid Proxy"
Save
Re-install continued and completed
Re-enable Squid.

***This was after several attempts to upgrade, uninstall, reinstall, killall... YMMV.

UPDATE - 20200618: Checked the package manager and Squid showed an update. Ran the update and this time Squid encountered the same problem as squidGuard above. Applied the same solution and it worked, again.

dotcom

@tmsongster This worked for me. Thank you.

emeric

@tmsongster thanks for your solution it also worked for me too !