2.4.4 ICMPv6 Firewall Rules?

JKnott

@johnpoz said in 2.4.4 ICMPv6 Firewall Rules?:

multicast is suppose to be on the L2...

Multicast can pass through routers, but that must be arranged for. That is normally done with IGMP on IPv4 or MLD on IPv6.

lohphat

@JKnott That's the point, MLDv2 is not supported on FreeBSD yet, thus pfSense can't handle the IPv6 multicast routing properly.

https://redmine.pfsense.org/issues/6228

lohphat

@JKnott Hmm. I just found this: https://www.freebsd.org/releases/8.0R/relnotes.html

"The IGMPv3 and SSM (Source-Specific Multicast) including IPv6 SSM and MLDv2 have been added."

Since pfSense is running on 11.x now (I think) then that feature request must be blocked by something else.

OffstageRoller

The confusion for me, comes from third party sites and their "tests."

If I don't create a rule on my WAN to allow Any to my computer on ICMPv6, the following site will show a "not tested" for ICMP and instruct me to adjust my firewall:
https://ipv6-test.com

I see the rejected entry in my logs for that test.

If I create the rule to allow that connection, I show as passing and I can see that request pass through my firewall to my computer.

But that begs the question, what exactly are they testing? Are they sending a ping request without me initiating the connection? Because I believe that's not valid for how IPv6 is designed to work correct?

Here's an example of what they show when I don't create a specific rule to allow ICMPv6 through my firewall:

Screen Shot 2020-06-12 at 12.39.30 PM.jpg

johnpoz

If you want to allow icmp through pfsense to your IPv6 clients - yes you would have to allow that.

Pfsense out of the box does not allow icmp echo requests to it or through it out of the box.. Doing so would be a horrible IDEA.. Out of the box no unsolicited inbound traffic is allowed or answered..

Other than the min required to say get an IPv6 address.. on your wan, which is not a echo request for sure.

But its simple enough to fix - see my test..

I am curious how they are doing their PTR test though.. Because my IPv6 address does have a PTR setup..

That resolves on the public internet, but they are saying there isn't one.. Maybe because it doesn't resolve? I will check on it later, and change it so forward matches and is valid domain see if that fixes their test site result.

request pass through my firewall to my computer.

You have to make sure the IP your pinging firewall also allows it... Just because you allow it through pfsense doesn't mean the clients firewall will answer.

OffstageRoller

Thank you for the reply @johnpoz

I agree that is is easy enough to fix, and I end up getting the same test results as you once I allow ICMPv6 Any to Any.

I also get the same result with Hostname being "none." In my case, I get no answer with a public DNS like 8.8.8.8, but my pfSense DNS resolver does return an answer.

I do still have the question on what is required by IPv6 to function properly. Going back to a previous quote of yours in this thread:

The required icmpv6 stuff for ipv6 to work on wan - is there!!! Same goes for lan side for clients to find pfsense as their ipv6 gateway.. There is NOTHING you need to add..
All other to wan would be blocked out of the gate - if you want to allow actual ping response.. Then you can add that.. Same sort of thing goes if you want to allow into your lan from outside..

That makes perfect sense. But does IPv6 want ICMPv6 to be allowed through the WAN in order for it to function properly? Because IPv6 seems to be functioning just fine without that rule. The only issue I've seen is this one site saying that test isn't passing. But who knows... I may have some issues where I can't connect properly to some IPv6 endpoints because they can't properly send ICMP packets and I'm simply reverting to IPv4 and not noticing any delays due to happy eyeballs.

lohphat

ICMPv6 is important for Path MTU discovery since there's no fragmentation allowed in IPv6.

If you are to allow ICMP inbound (as it could come from an intermediate router) then the solution to address security concerns is to rate-limit ICMP requests to guard against flooding or scanning.

http://shouldiblockicmp.com/ is not a definitive source but it raises valid arguments in favor on reasonable inbound ICMP requests.

OffstageRoller

Thank you @lohphat, that link was helpful.

I'm on board with allowing and limiting. Is there a way to rate-limit ICMP requests within pfSense?

I see some advanced settings like "Max. src. conn. Rate" and "Max. src. conn. Rates" for my ICMP allow rule, but these limiters say they're for TCP only which won't help with ICMP.

Gertjan

@OffstageRoller said in 2.4.4 ICMPv6 Firewall Rules?:

I allow ICMPv6 Any to Any.

For my device called "Gauche", this will do :

I had to create a rule on the device, a PC, in the Windows firewall so it would accept ICMPv6 request from "all over the planet".

JKnott

@johnpoz said in 2.4.4 ICMPv6 Firewall Rules?:

Other than the min required to say get an IPv6 address..

Don't forget about path MTU detection. You need to allow for that.

johnpoz

That is not an inbound thing.. That would be the client going outbound. Which default is any any!!

Their statement
"Your router or firewall is filtering ICMPv6 messages sent to your computer. An IPv6 host that cannot receive ICMP messages may encounter problems like some web pages loading partially or not at all."

Is just full of SHIT.. you pinging me, has zero to do with anything... And all they are doing is pinging..

Gertjan

@johnpoz said in 2.4.4 ICMPv6 Firewall Rules?:

Is just full of SHIT.

I agree. The "hostname" known or not, and that ping-thing, do not belong on that test page ....

johnpoz

The VAST majority of users have zero control over their PTR.. And has zero to do with being a client on the internet.. Sure if your running a mail server or something then you need to make sure your PTR is in order.

Mine finely showed up on that site btw.. They must of cached the NX, since I had set it after got a none..

But they are clearly posting FUD that if your IP doesn't ping shit might not load.. That is just utter nonsense..

Gertjan

@johnpoz said in 2.4.4 ICMPv6 Firewall Rules?:

The VAST majority of users have zero control over their PTR.. And has zero to do with being a client on the internet.. Sure if your running a mail server or something then you need to make sure your PTR is in order.

That's exactly what I'm doing - have "MX servers" that have to be compliant, so PTR's have to get set correctly.
A rather exceptional situation and not important for the average SOHO user.

johnpoz

@beremonavabi said in 2.4.4 ICMPv6 Firewall Rules?:

But, what do I actually NEED?

Going back to the OP from 2018, NOTHING is the answer here.. There is ZERO need to add any rules on the wan for IPv6 to function..

q54e3w

hey @johnpoz , is that true if you have internally hosted services that connections are initiated to from outside the local network too? I assume (perhaps wrongly) route size discovery is initiated by the requester.

JKnott

@q54e3w said in 2.4.4 ICMPv6 Firewall Rules?:

I assume (perhaps wrongly) route size discovery is initiated by the requester.

Neither end initiates it. When a packet encounters a link with a smaller MTU, the router sends the "too big" message. Also, it is possible for the 2 ends to provide a different size MTU, so 1 end might get the MTU warning, but not the other.

johnpoz

@q54e3w said in 2.4.4 ICMPv6 Firewall Rules?:

is that true if you have internally hosted services

That would be unsolicited inbound traffic.. Then sure you would have to allow for whatever you want to allow for.. For example I setup pfsense to send rejects on trace route ports...

But out of the box, pfsense is not going to allow for any unsolicited inbound anything other than is required to allow for whatever to work.. If they didn't do that in the background automatic - the forum would be flooded with how to make X work because users are stupid, they don't search they don't read docs, etc.. So yes pfsense allows for the basic stuff to allow for X to work or otherwise they would be overwhelmed with how to make X works ;)

I really don't get how this is a question.. What firewall do you know of that allows X unsolicited in bound traffic. If any firewall software did that they for sure would get shit about it.

catonic

I'm running into this issue as well, a full two or three years later. The crux of the matter is that out of all of the options available, no combination of IPv6 (IP version) and (echorep, echoreq) allows IPv6 ICMPv6 packets. The PF rules match for IPv6 * * * to * * and the counter goes up on that rule. I have preceding rules that address IPv6 and ICMP *, as well as another IPv6 ICMP echoreq,echorep above it. Neither of those two counters have moved from zero.

What we need is the ability to select a Custom protocol and enter a value there, because ICMPv6 is not an option on the drop-down with ESP, AH, GRE, IPV6 (what does that even do with an IP type of IPv4?), etc.

Honestly, we need that ability on all the menus to support ancient protocols and random new ones.

johnpoz

@catonic said in 2.4.4 ICMPv6 Firewall Rules?:

because ICMPv6 is not an option on the drop-down

Sure it is.. What do you think ICMP is when you select IPv6?

Here created a test rule

[23.05.1-RELEASE][admin@sg4860.local.lan]/root: cat /tmp/rules.debug | grep "test icmpv6"
pass  in  quick  on $TEST inet6 proto ipv6-icmp  from any to any ridentifier 1695465595 keep state label "USER_RULE: test icmpv6" label "id:1695465595"
[23.05.1-RELEASE][admin@sg4860.local.lan]/root

This thread is 3 some years old - if you are having a problem, it would be best if you actually give details of what your trying to accomplish, how and what you have done to test it.

There are also hidden rules that allow some icmpv6

# Allow only bare essential icmpv6 packets (NS, NA, and RA, echoreq, echorep)
pass out  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {129,133,134,135,136} ridentifier 1000000108 keep state
pass out  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {129,133,134,135,136} ridentifier 1000000109 keep state
pass in  quick inet6 proto ipv6-icmp from fe80::/10 to fe80::/10 icmp6-type {128,133,134,135,136} ridentifier 1000000110 keep state
pass in  quick inet6 proto ipv6-icmp from ff02::/16 to fe80::/10 icmp6-type {128,133,134,135,136} ridentifier 1000000111 keep state
pass in  quick inet6 proto ipv6-icmp from fe80::/10 to ff02::/16 icmp6-type {128,133,134,135,136} ridentifier 1000000112 keep state
pass in  quick inet6 proto ipv6-icmp from :: to ff02::/16 icmp6-type {128,133,134,135,136} ridentifier 1000000113 keep state

Here I created a icmpv6 echo request rule, then sent some ipv6 pings..

And the counter goes up.