2.4.5-p1 crash in vr
-
I have the same problem and I don't know where to start.
Can you help us ?Thank you
Dump header from device: /dev/label/swap0
Architecture: amd64
Architecture Version: 1
Dump Length: 86528
Blocksize: 512
Dumptime: Tue Jun 16 09:49:17 2020
Hostname: yyyyyyyyyyyyyyyy
Magic: FreeBSD Text Dump
Version String: FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020
root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/source
Panic String: page fault
Dump Parity: 2867970129
Bounds: 0
Dump Status: good -
Help-me !
ddb.txt
ddb.txt 0600 0 0 140000 13672137715 7106 ustar root wheel db:0:kdb.enter.default> run lockinfo
db:1:lockinfo> show locks
No such command; use "help" to list available commands
db:1:lockinfo> show alllocks
No such command; use "help" to list available commands
db:1:lockinfo> show lockedvnods
Locked vnodes
db:0:kdb.enter.default> show pcpu
cpuid = 2
dynamic pcpu = 0xfffffe02ab330580
curthread = 0xfffff8000625c000: pid 12 "swi5: fast taskq"
curpcb = 0xfffffe01eed84cc0
fpcurthread = none
idlethread = 0xfffff80006247000: tid 100005 "idle: cpu2"
curpmap = 0xffffffff834f1c40
tssp = 0xffffffff835a33a0
commontssp = 0xffffffff835a33a0
rsp0 = 0xfffffe01eed84cc0
gs32p = 0xffffffff835a9ff8
ldt = 0xffffffff835aa038
tss = 0xffffffff835aa028
tlb gen = 5803
db:0:kdb.enter.default> bt
Tracing pid 12 tid 100011 td 0xfffff8000625c000
kdb_enter() at kdb_enter+0x3b/frame 0xfffffe01eed846f0
vpanic() at vpanic+0x19b/frame 0xfffffe01eed84750
panic() at panic+0x43/frame 0xfffffe01eed847b0
trap_pfault() at trap_pfault/frame 0xfffffe01eed84800
trap_pfault() at trap_pfault+0x49/frame 0xfffffe01eed84860
trap() at trap+0x29d/frame 0xfffffe01eed84970
calltrap() at calltrap+0x8/frame 0xfffffe01eed84970
--- trap 0xc, rip = 0xffffffff80b10317, rsp = 0xfffffe01eed84a40, rbp = 0xfffffe01eed84aa0 ---
vr_int_task() at vr_int_task+0x2e7/frame 0xfffffe01eed84aa0
taskqueue_run_locked() at taskqueue_run_locked+0x185/frame 0xfffffe01eed84b00
taskqueue_run() at taskqueue_run+0x7a/frame 0xfffffe01eed84b20
intr_event_execute_handlers() at intr_event_execute_handlers+0xe9/frame 0xfffffe01eed84b60
ithread_loop() at ithread_loop+0xe7/frame 0xfffffe01eed84bb0
fork_exit() at fork_exit+0x83/frame 0xfffffe01eed84bf0
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe01eed84bf0
--- trap 0, rip = 0, rsp = 0, rbp = 0 ---
db:0:kdb.enter.default> ps
pid ppid pgrp uid state wmesg wchan cmd
47948 1 252 0 R CPU 0 reboot
70 0 0 0 DL mdwait 0xfffff80024889000 [md0]
31 0 0 0 DL kpsusp 0xfffff800248ecac8 [vnlru]
30 0 0 0 DL kpsusp 0xfffff800248ed538 [syncer]
29 0 0 0 DL - 0xffffffff8343ec0c [bufspacedaemon]
28 0 0 0 DL (threaded) [bufdaemon]
100116 D kpsusp 0xfffff80006383538 [bufdaemon]
27 0 0 0 DL pgzero 0xffffffff83480d70 [pagezero]
26 0 0 0 DL psleep 0xffffffff83480d60 [vmdaemon]
25 0 0 0 DL (threaded) [pagedaemon]
100111 D psleep 0xffffffff83522318 [dom0]
100112 D launds 0xffffffff8347d1c4 [laundry: dom0]
100113 D umarcl 0xffffffff8347cb38 [uma]
24 0 0 0 DL - 0xffffffff83219918 [rand_harvestq]
23 0 0 0 DL pftm 0xffffffff80f8ac70 [pf purge]
22 0 0 0 DL waiting_ 0xffffffff83518ec8 [sctp_iterator]
21 0 0 0 DL - 0xffffffff8343e48c [soaiod4]
20 0 0 0 DL - 0xffffffff8343e48c [soaiod3]
19 0 0 0 DL - 0xffffffff8343e48c [soaiod2]
18 0 0 0 DL - 0xffffffff8343e48c [soaiod1]
17 0 0 0 DL - 0xfffff80006528e48 [fdc0]
16 0 0 0 DL (threaded) [usb]
100068 D - 0xfffffe00010c2dc8 [usbus0]
100069 D - 0xfffffe00010c2e20 [usbus0]
100070 D - 0xfffffe00010c2e78 [usbus0]
100071 D - 0xfffffe00010c2ed0 [usbus0]
100072 D - 0xfffffe00010c2f28 [usbus0]
100074 D - 0xfffffe00010d6dc8 [usbus1]
100075 D - 0xfffffe00010d6e20 [usbus1]
100076 D - 0xfffffe00010d6e78 [usbus1]
100077 D - 0xfffffe00010d6ed0 [usbus1]
100078 D - 0xfffffe00010d6f28 [usbus1]
100080 D - 0xfffffe00010e6dc8 [usbus2]
100081 D - 0xfffffe00010e6e20 [usbus2]
100082 D - 0xfffffe00010e6e78 [usbus2]
100083 D - 0xfffffe00010e6ed0 [usbus2]
100084 D - 0xfffffe00010e6f28 [usbus2]
100085 D - 0xfffffe00010f6cf0 [usbus3]
100086 D - 0xfffffe00010f6d48 [usbus3]
100087 D - 0xfffffe00010f6da0 [usbus3]
100088 D - 0xfffffe00010f6df8 [usbus3]
100089 D - 0xfffffe00010f6e50 [usbus3]
9 0 0 0 DL idle 0xfffffe000107d2f0 [mpt_raid0]
8 0 0 0 DL idle 0xfffffe000107d000 [mpt_recovery0]
7 0 0 0 DL (threaded) [cam]
100059 D - 0xffffffff830cc080 [doneq0]
100109 D - 0xffffffff830cbec8 [scanner]
15 0 0 0 DL seqstate 0xfffff800062cc888 [sequencer 00]
6 0 0 0 DL crypto_r 0xfffff8000637d750 [crypto returns 3]
5 0 0 0 DL crypto_r 0xfffff8000637d6f0 [crypto returns 2]
4 0 0 0 DL crypto_r 0xfffff8000637d690 [crypto returns 1]
3 0 0 0 DL crypto_r 0xfffff8000637d630 [crypto returns 0]
2 0 0 0 DL crypto_w 0xffffffff8347b6a8 [crypto]
14 0 0 0 DL (threaded) [geom]
100046 D - 0xffffffff834f0ee8 [g_event]
100047 D - 0xffffffff834f0ef8 [g_up]
100048 D - 0xffffffff834f0ef0 [g_down]
13 0 0 0 DL (threaded) [ng_queue]
100041 D sleep 0xffffffff83080000 [ng_queue0]
100042 D sleep 0xffffffff83080000 [ng_queue1]
100043 D sleep 0xffffffff83080000 [ng_queue2]
100044 D sleep 0xffffffff83080000 [ng_queue3]
12 0 0 0 RL (threaded) [intr]
100007 I [swi6: task queue]
100008 I [swi6: Giant taskq]
100011 Run CPU 2 [swi5: fast taskq]
100032 L *Giant 0xfffff80004fa8480 [swi4: clock (0)]
100033 I [swi4: clock (1)]
100034 I [swi4: clock (2)]
100035 I [swi4: clock (3)]
100036 I [swi1: netisr 0]
100037 I [swi1: netisr 1]
100038 I [swi1: netisr 2]
100039 I [swi1: netisr 3]
100040 I [swi3: vm]
100060 I [irq256: mpt0]
100063 I [irq16: bge0]
100064 I [irq257: pcib6]
100067 I [irq20: hpet0 uhci0+]
100073 I [irq21: uhci1]
100079 I [irq22: uhci2]
100090 I [irq18: xl0]
100091 I [irq14: ata0]
100093 I [swi0: uart]
100094 I [irq1: atkbd0]
100102 I [swi1: pf send]
100103 I [swi1: pfsync]
11 0 0 0 RL (threaded) [idle]
100003 CanRun [idle: cpu0]
100004 Run CPU 1 [idle: cpu1]
100005 CanRun [idle: cpu2]
100006 Run CPU 3 [idle: cpu3]
1 0 1 0 SLs wait 0xfffff80006245590 [init]
10 0 0 0 DL audit_wo 0xffffffff83520368 [audit]
0 0 0 0 DLs (threaded) [kernel]
100000 D swapin 0xffffffff834f1570 [swapper]
100009 D - 0xfffff80004fb1c00 [thread taskq]
100010 D - 0xfffff80004fb1a00 [aiod_kick taskq]
100012 D - 0xfffff80004fb1600 [kqueue_ctx taskq]
100013 D - 0xfffff80004fb1400 [linuxkpi_short_wq_0]
100014 D - 0xfffff80004fb1400 [linuxkpi_short_wq_1]
100015 D - 0xfffff80004fb1400 [linuxkpi_short_wq_2]
100016 D - 0xfffff80004fb1400 [linuxkpi_short_wq_3]
100017 D - 0xfffff80004fb1400 [linuxkpi_short_wq_4]
100018 D - 0xfffff80004fb1200 [linuxkpi_long_wq_0]
100019 D - 0xfffff80004fb1200 [linuxkpi_long_wq_1]
100020 D - 0xfffff80004fb1200 [linuxkpi_long_wq_2]
100021 D - 0xfffff80004fb1200 [linuxkpi_long_wq_3]
100022 D - 0xfffff80004fb1200 [linuxkpi_long_wq_4]
100023 D - 0xfffff80004fb1000 [if_io_tqg_0]
100024 D - 0xfffff80004fb0e00 [if_io_tqg_1]
100025 D - 0xfffff80004fb0c00 [if_io_tqg_2]
100026 D - 0xfffff80004fb0a00 [if_io_tqg_3]
100027 D - 0xfffff80004fb0800 [if_config_tqg_0]
100028 D - 0xfffff80004fb0600 [softirq_0]
100029 D - 0xfffff80004fb0400 [softirq_1]
100030 D - 0xfffff80004fb0200 [softirq_2]
100031 D - 0xfffff80004fb0000 [softirq_3]
100045 D - 0xfffff80006290800 [firmware taskq]
100049 D - 0xfffff80004fb3a00 [crypto_0]
100050 D - 0xfffff80004fb3a00 [crypto_1]
100051 D - 0xfffff80004fb3a00 [crypto_2]
100052 D - 0xfffff80004fb3a00 [crypto_3]
100065 D - 0xfffff80006529e00 [em0 que]
100066 D - 0xfffff80006529c00 [em0 txq]
100095 D - 0xfffff8000678fe00 [mca taskq]
100104 D - 0xfffff8000678de00 [acpi_task_0]
100105 D - 0xfffff8000678de00 [acpi_task_1]
100106 D - 0xfffff8000678de00 [acpi_task_2]
100108 D - 0xfffff8000637a800 [CAM taskq]
100110 D - 0xfffff800064c9400 [mlx4]
db:0:kdb.enter.default> alltraceTracing command reboot pid 47948 tid 100180 td 0xfffff80057450620
cpustop_handler() at cpustop_handler+0x2f/frame 0xffffffff83485090
ipi_nmi_handler() at ipi_nmi_handler+0x40/frame 0xffffffff834850b0
trap() at trap+0x39/frame 0xffffffff834851c0
nmi_calltrap() at nmi_calltrap+0x8/frame 0xffffffff834851c0
--- trap 0x13, rip = 0xffffffff813ed084, rsp = 0xfffffe02391d77f0, rbp = 0xfffffe02391d7830 ---
DELAY() at DELAY+0x74/frame 0xfffffe02391d7830
re_stop() at re_stop+0x192/frame 0xfffffe02391d7860
re_shutdown() at re_shutdown+0x3c/frame 0xfffffe02391d7880
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d78a0
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d78c0
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d78e0
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d7900
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d7920
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d7940
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d7960
acpi_shutdown() at acpi_shutdown+0xd/frame 0xfffffe02391d7990
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d79b0
bus_generic_shutdown() at bus_generic_shutdown+0x5a/frame 0xfffffe02391d79d0
root_bus_module_handler() at root_bus_module_handler+0x11e/frame 0xfffffe02391d7a00
module_shutdown() at module_shutdown+0x6f/frame 0xfffffe02391d7a20
kern_reboot() at kern_reboot+0x47a/frame 0xfffffe02391d7a70
sys_reboot() at sys_reboot+0x433/frame 0xfffffe02391d7ac0
amd64_syscall() at amd64_syscall+0xa86/frame 0xfffffe02391d7bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe02391d7bf0
--- syscall (55, FreeBSD ELF64, sys_reboot), rip = 0x80086c52a, rsp = 0x7fffffffeb18, rbp = 0x7fffffffec90 --- -
My msgbuf.txt
msgbuf.txt 0600 0 0 65271 13672137715 7600 ustar root wheel Copyright (c) 1992-2020 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020
root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64
FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1)
VT(vga): resolution 640x480
CPU: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (2400.14-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
real memory = 8589934592 (8192 MB)
avail memory = 8238841856 (7857 MB)
Event timer "LAPIC" quality 100
ACPI APIC Table: <DELL PE_SC3 >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aEventBlock: 32/4 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/2 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/PmTimerBlock: 32/4 (20171214/tbfadt-748)
Firmware Warning (ACPI): 32/64X length mismatch in FADT/Gpe0Block: 64/8 (20171214/tbfadt-748)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aEventBlock: 4, using default 32 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/Pm1aControlBlock: 2, using default 16 (20171214/tbfadt-850)
Firmware Warning (ACPI): Invalid length for FADT/PmTimerBlock: 4, using default 32 (20171214/tbfadt-850)
ioapic0: Changing APIC ID to 4
ioapic1: Changing APIC ID to 5
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 1200068631 Hz quality 1000
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a2fd0, 0) error 1
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a3080, 0) error 1
iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806ca140, 0) error 1
iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806ca1f0, 0) error 1
iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE.
iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806ca2a0, 0) error 1
random: entropy device external interface
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE.
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.
module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a2f20, 0) error 1
wlan: mac acl policy registered
kbd1 at kbdmux0
000.000022 [4213] netmap_init netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19
mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019)
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
padlock0: No ACE support.
acpi0: <DELL PE_SC3> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pcib0: OSC returned error 0x10
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <PCI-PCI bridge> at device 0.0 on pci1
pci2: <PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xfe9fc000-0xfe9fffff,0xfe9e0000-0xfe9effff irq 16 at device 8.0 on pci2
mpt0: MPI Version=1.5.13.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
device_attach: ioapic0 attach returned 6
pcib3: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 0.0 on pci3
pci4: <ACPI PCI bus> on pcib4
re0: <D-Link DGE-528(T) Gigabit Ethernet Adapter> port 0xdc00-0xdcff mem 0xfe5ffc00-0xfe5ffcff irq 32 at device 1.0 on pci4
re0: Chip rev. 0x10000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 84:c9:b2:47:2d:61
re0: netmap queues/slots: TX 1/256, RX 1/256
vr0: <VIA VT6105 Rhine III 10/100BaseTX> port 0xd800-0xd8ff mem 0xfe5ff800-0xfe5ff8ff irq 35 at device 2.0 on pci4
vr0: Quirks: 0x0
vr0: Revision: 0x8b
miibus1: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> PHY 1 on miibus1
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
vr0: Ethernet address: 00:21:91:53:23:65
pcib5: <ACPI PCI-PCI bridge> at device 28.4 on pci0
pci5: <ACPI PCI bus> on pcib5
bge0: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x004101> mem 0xfe2f0000-0xfe2fffff irq 16 at device 0.0 on pci5
bge0: CHIP ID 0x00004101; ASIC REV 0x04; CHIP REV 0x41; PCI-E
miibus2: <MII bus> on bge0
brgphy0: <BCM5750 1000BASE-T media interface> PHY 1 on miibus2
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bge0: Ethernet address: 00:21:9b:fa:26:52
pcib6: <ACPI PCI-PCI bridge> at device 28.5 on pci0
pcib6: [GIANT-LOCKED]
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xbce0-0xbcff mem 0xfe0e0000-0xfe0fffff,0xfe0c0000-0xfe0dffff irq 17 at device 0.0 on pci6
em0: Using an MSI interrupt
em0: Ethernet address: 00:15:17:8f:e8:18
em0: netmap queues/slots: TX 1/1024, RX 1/1024
uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x9ce0-0x9cff irq 20 at device 29.0 on pci0
usbus0 on uhci0
usbus0: 12Mbps Full Speed USB v1.0
uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x9cc0-0x9cdf irq 21 at device 29.1 on pci0
usbus1 on uhci1
usbus1: 12Mbps Full Speed USB v1.0
uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x9ca0-0x9cbf irq 22 at device 29.2 on pci0
usbus2 on uhci2
usbus2: 12Mbps Full Speed USB v1.0
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0xfeb00000-0xfeb003ff irq 20 at device 29.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
usbus3: 480Mbps High Speed USB v2.0
pcib7: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib7
xl0: <3Com 3c905B-TX Fast Etherlink XL> port 0xac80-0xacff mem 0xfdeffc00-0xfdeffc7f irq 18 at device 0.0 on pci7
miibus3: <MII bus> on xl0
xlphy0: <3Com internal media interface> PHY 24 on miibus3
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
xl0: Ethernet address: 00:01:02:76:07:93
vgapci0: <VGA-compatible display> port 0xa800-0xa8ff mem 0xe8000000-0xefffffff,0xfdee0000-0xfdeeffff irq 19 at device 5.0 on pci7
vgapci0: Boot video device
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 31.1 on pci0
ata0: <ATA channel> at channel 0 on atapci0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xec000-0xeffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est0 attach returned 6
est1: <Enhanced SpeedStep Frequency Control> on cpu1
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est1 attach returned 6
est2: <Enhanced SpeedStep Frequency Control> on cpu2
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est2 attach returned 6
est3: <Enhanced SpeedStep Frequency Control> on cpu3
est: CPU supports Enhanced Speedstep, but is not recognized.
est: cpu_vendor GenuineIntel, msr 928092806000928
device_attach: est3 attach returned 6
Timecounters tick every 1.000 msec
ugen0.1: <Intel UHCI root HUB> at usbus0
ugen1.1: <Intel UHCI root HUB> at usbus1
ugen2.1: <Intel UHCI root HUB> at usbus2
ugen3.1: <Intel EHCI root HUB> at usbus3
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
uhub3: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub1: 6 ports with 6 removable, self powered
cd0 at ata0 bus 0 scbus2 target 0 lun 0
cd0: <TSSTcorp CDRWDVD TS-H492C DE02> Removable CD-ROM SCSI device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <ATA ADATA SP600 2.1> Fixed Direct Access SPC-3 SCSI device
da0: Serial Number 53528142300400000113
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 30533MB (62533296 512 byte sectors)
device_attach: ioapic0 attach returned 6
device_attach: ioapic0 attach returned 6
Trying to mount root from ufs:/dev/ufsid/5ee8b6c274f10795 [rw,noatime]...
random: unblocking device.
<118>Configuring crash dumps...
<118>Using /dev/label/swap0 for dump device.
<118>/dev/ufsid/5ee8b6c274f10795: FILE SYSTEM CLEAN; SKIPPING CHECKS
<118>/dev/ufsid/5ee8b6c274f10795: clean, 6860092 free (724 frags, 857421 blocks, 0.0% fragmentation)
<118>Filesystems are clean, continuing...
<118>Mounting filesystems...
<118>
<118> __
<118> _ __ / |_ ___ _ __ ___ ___
<118>| '_ | |/ _|/ _ \ ' / __|/ _
<118>| |) | _ \ / | | _ \ /
<118>| ./|| |/_|| ||/_|
<118>|_|
<118>
<118>
<118>Welcome to pfSense 2.4.5-RELEASE (Patch 1)...
<118>
<118>No core dumps found.
<118>...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/ipsec /usr/local/lib/perl5/5.30/mach/CORE
<118>32-bit compatibility ldconfig path:
<118>done.
<118>External config loader 1.0 is now starting... da0s1 da0s1a da0s1b
<118>Launching the init system...Updating CPU Microcode...
CPU: Intel(R) Xeon(R) CPU X3220 @ 2.40GHz (2400.14-MHz K8-class CPU)
Origin="GenuineIntel" Id=0x6fb Family=0x6 Model=0xf Stepping=11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
AMD Features=0x20100800<SYSCALL,NX,LM>
AMD Features2=0x1<LAHF>
VT-x: HLT,PAUSE
TSC: P-state invariant, performance statistics
<118>Done.
<118>...... done.
<118>Initializing.................. done.
<118>Starting device manager (devd)...done.
<118>Loading configuration......done.
<118>Updating configuration...done.
<118>Checking config backups consistency........................done.
<118>Setting up extended sysctls...done.
<118>Setting timezone...done.
<118>Configuring loopback interface...
<5>lo0: link state changed to UP
<118>done.
<118>Starting syslog...done.
<118>Starting Secure Shell Services...done.
<118>Setting up interfaces microcode...done.
<118>Configuring loopback interface...done.
<118>Creating wireless clone interfaces...done.
<118>Configuring LAGG interfaces...done.
<118>Configuring VLAN interfaces...done.
<118>Configuring QinQ interfaces...done.
<118>Configuring IPsec VTI interfaces...done.
<118>Configuring WAN0 interface...
<5>xl0: link state changed to DOWN
<118>done.
<118>Configuring LAN interface...
<5>bge0: link state changed to DOWN
<118>done.
<118>Configuring WAN1 interface...
<5>vr0: link state changed to DOWN
<118>done.
<118>Configuring SYNC interface...
<5>re0: link state changed to DOWN
<118>done.
<6>bge0: promiscuous mode enabled
<6>carp: demoted by 240 to 240 (interface down)
<6>xl0: promiscuous mode enabled
<6>carp: demoted by 240 to 480 (interface down)
<6>vr0: promiscuous mode enabled
<6>carp: demoted by 240 to 720 (interface down)
<118>Configuring CARP settings...done.
<118>Configuring CARP settings...
<6>carp: 1@bge0: INIT -> BACKUP (initialization complete)
<6>carp: demoted by -240 to 480 (interface up)
<5>bge0: link state changed to UP
<5>re0: link state changed to UP
<118>done.
<118>Syncing OpenVPN settings...
<6>tun1: changing name to 'ovpns1'
<118>done.
<118>route: writing to routing socket: Invalid argument
<118>route: writing to routing socket: Invalid argument
<6>pflog0: promiscuous mode enabled
<118>Configuring firewall......done.
<118>Starting PFLOG...done.
<118>Setting up gateway monitors...
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>done.
<118>Setting up static routes...
<7>arpresolve: can't allocate llinfo for xxx.xxx.xxx.1 on vr0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for xxx.xxx.xxx.1 on vr0
<6>carp: 3@vr0: INIT -> BACKUP (initialization complete)
<6>carp: demoted by -240 to 240 (interface up)
<5>vr0: link state changed to UP
<3>arp: 00:11:6b:96:9e:e4 is using my IP address xxx.xxx.xxx.9 on vr0!
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>done.
<118>Setting up DNSs...
<118>Starting DNS forwarder...done.
<118>Synchronizing user settings...
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>done.
<118>Starting webConfigurator...
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>done.
<118>Configuring CRON...done.
<118>Starting NTP time client...done.
<118>Configuring firewall.
<6>carp: 3@vr0: BACKUP -> MASTER (master timed out)
<118>.....done.
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<5>ovpns1: link state changed to UP
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>Starting SNMP daemon... done.
<118>Generating RRD graphs...done.
<118>Triggering packages reinstallation in background
<118>Starting syslog...done.
<118>Starting CRON... done.
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<118>pfSense 2.4.5-RELEASE (Patch 1) amd64 Tue Jun 02 17:51:17 EDT 2020
<118>Bootup complete
<3>arp: 00:11:6b:96:9e:e4 is using my IP address xxx.xxx.xxx.9 on vr0!
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<7>arpresolve: can't allocate llinfo for yyy.yyy.yyy.145 on xl0
<6>carp: 2@xl0: INIT -> BACKUP (initialization complete)
<6>carp: demoted by -240 to 0 (interface up)
<5>xl0: link state changed to UP
<6>carp: 2@xl0: BACKUP -> MASTER (preempting a slower master)
<6>carp: 1@bge0: BACKUP -> MASTER (preempting a slower master)
<7>ifa_maintain_loopback_route: deletion failed for interface xl0: 3
<7>ifa_maintain_loopback_route: deletion failed for interface xl0: 3
<6>carp: 2@xl0: MASTER -> INIT (hardware interface up)
<6>carp: 2@xl0: INIT -> BACKUP (initialization complete)
<6>carp: 2@xl0: BACKUP -> MASTER (master timed out)
<7>ifa_maintain_loopback_route: deletion failed for interface vr0: 3
<7>ifa_maintain_loopback_route: deletion failed for interface vr0: 3
<6>carp: 3@vr0: MASTER -> INIT (hardware interface up)
<6>vr0: promiscuous mode disabled
<6>vr0: promiscuous mode enabled
<6>carp: 3@vr0: INIT -> BACKUP (initialization complete)
<6>carp: 3@vr0: BACKUP -> MASTER (preempting a slower master)
<5>ovpns1: link state changed to DOWN
<5>ovpns1: link state changed to UP
<5>ovpns1: link state changed to DOWN
<5>ovpns1: link state changed to UP
<5>ovpns1: link state changed to DOWN
<5>ovpns1: link state changed to UP
<7>ifa_maintain_loopback_route: deletion failed for interface vr0: 3
<7>ifa_maintain_loopback_route: deletion failed for interface vr0: 3
<6>carp: 3@vr0: MASTER -> INIT (hardware interface up)
<6>vr0: promiscuous mode disabled
<6>vr0: promiscuous mode enabled
<6>carp: 3@vr0: INIT -> BACKUP (initialization complete)
<5>ovpns1: link state changed to DOWN
<6>carp: 3@vr0: BACKUP -> MASTER (preempting a slower master)
<5>ovpns1: link state changed to UP
<6>pflog0: promiscuous mode disabled
<5>ovpns1: link state changed to DOWN
Waiting (max 60 seconds) for system processvnlru' to stop... done Waiting (max 60 seconds) for system processbufdaemon' to stop... done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining... 2 1 0 0 done
All buffers synced.
Uptime: 2m53sFatal trap 12: page fault while in kernel mode
cpuid = 2; apic id = 02
fault virtual address = 0x18
fault code = supervisor write data, page not present
instruction pointer = 0x20:0xffffffff80b10317
stack pointer = 0x28:0xfffffe01eed84a40
frame pointer = 0x28:0xfffffe01eed84aa0
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 12 (swi5: fast taskq)
trap number = 12
panic: page fault
cpuid = 2
KDB: enter: panic
panic.txt 0600 0 0 12 13672137715 7145 ustar root wheel page fault version.txt 0600 0 0 330 13672137715 7623 ustar root wheel FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020
root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSenseTks
-
I split your posts off to a new topic since, although it was a crash, it was nowhere near the same crash.
Yours is crashing in the NIC driver while processing an interrupt from a vr(4) NIC. Those Via Rhine NICs are very, very old (They're only 10/100!) and were never all that reliable. I would strongly suggest replacing that NIC with a quality Intel NIC gigabit NIC. And replace those Realtek NICs while you are at it.
