Att business fiber public address routing.
-
@chpalmer let me see what I can do Monday,at this rate I will just use a l3 to route my transport.
I thought that did not sound right but I was mpt sure with pfsense.
-
This is from a few years ago.. Maybe some of the info is still relevant..
http://www.dslnuts.com/discussion/index.php/topic,6394.0.html
I assume you are trying to use pfsense behind the uverse router??
-
@chpalmer no, have a 3903x with fiber right to my pfsense they hand off with a serial link, or they call it that.
Have a /30 and /29, the /30 is really just for connecting to att from any device wan port and the publics have a static route that say any from the /29 send to the/30 in atts network.
-
/30 is outside the same subnet as the /29 ??
https://docs.netgate.com/pfsense/en/latest/nat/index.html
-
No.
-
I did get the 1:1 to work did not test it fully but was reading it will break the vpn connection.
So if i may the lan subnet with vlan to one of my public address it will work right.
-
Ah.. https://docs.netgate.com/pfsense/en/latest/nat/using-1-1-nat-on-a-wan-ip-address.html
"Yes, 1:1 NAT may be used from the WAN IP address to an internal IP address. But be aware that this maps every port and services on the firewall will no longer be reachable from the outside. To reach the firewall from the outside, port forward entries must be added to negate the 1:1 NAT for the specific ports on the firewall to be reached."
-
That is fine, that is easy enough to deal with. I guess I read that differently, thank you for the slap on my head.
I will test this out Monday.
-
Good luck!
-
yeah can not get nat 1:1 and ipsec with port forwards to work right.
