2.4.5_1 much higher RAM usage than 2.4.4_p3 with no packages
-
Same config.
Alix APU2 with 2 GB of RAM2.4.4_p3
Using 20% of 1870 MiB RAM2.4.5_1
Using 70% of 1870 MiB RAM- Tested across many firewalls, same result, post upgrade, much higher RAM usage
- No packages installed
- Running ZFS file system
- Tried rebooting, same high RAM usage
See the screen shots below;
-
It looks like a larger amount of RAM is taken up for paging, couild this be ZFS file system?
SYSTEM MEMORY INFORMATION: mem_wire: 1198047232 ( 1142MB) [ 63%] Wired: disabled for paging out mem_active: + 76308480 ( 72MB) [ 4%] Active: recently referenced mem_inactive:+ 127647744 ( 121MB) [ 6%] Inactive: recently not referenced mem_cache: + 0 ( 0MB) [ 0%] Cached: almost avail. for allocation mem_free: + 497741824 ( 474MB) [ 26%] Free: fully available for allocation mem_gap_vm: + -258048 ( 0MB) [ 0%] Memory gap: UNKNOWN -------------- ------------ ----------- ------ mem_all: = 1899487232 ( 1811MB) [100%] Total real memory managed mem_gap_sys: + 50384896 ( 48MB) Memory gap: Kernel?! -------------- ------------ ----------- mem_phys: = 1949872128 ( 1859MB) Total real memory available mem_gap_hw: + 197611520 ( 188MB) Memory gap: Segment Mappings?! -------------- ------------ ----------- mem_hw: = 2147483648 ( 2048MB) Total real memory installed SYSTEM MEMORY SUMMARY: mem_used: 1522094080 ( 1451MB) [ 70%] Logically used memory mem_avail: + 625389568 ( 596MB) [ 29%] Logically available memory -------------- ------------ ----------- ------ mem_total: = 2147483648 ( 2048MB) [100%] Logically total memory